Application of Polyhedral Mesh for Vortex Formation Study for Simple Single Pump Sump
DOI:
https://doi.org/10.37934/cfdl.13.9.1327Keywords:
Vortex, pump, CFD, polyhedralAbstract
Meshing of domain in CFD is an important step to ensure accuracy of the solution. In the past, hexahedral or tetrahedral mesh systems were commonly used, and both have their merits and demerits. For large and complex geometry, polyhedral is another option but its accuracy is claimed to be lacking. In this paper, the use of polyhedral mesh system by past researchers are reviewed. Evaluation on the application of polyhedral mesh system for the study of the vortex formation with a simple single pump sump model is made. Validation was made through the comparison of the results from hexahedral, tetrahedral and polyhedral mesh sizes and the experimental data from published data. The polyhedral mesh system was found to perform satisfactorily and was able to match the results from the hexahedral mesh system as well as the experimental data.
References
Shabayek, Shazy A. "Improving approach flow hydraulics at pump intakes." International Journal of Civil & Environmental Engineering 10, no. 6 (2010): 23-31.
Ahn, Soo-Hwang, Yexiang Xiao, Zhengwei Wang, Xuezhi Zhou, and Yongyao Luo. "Numerical prediction on the effect of free surface vortex on intake flow characteristics for tidal power station." Renewable Energy 101 (2017): 617-628. https://doi.org/10.1016/j.renene.2016.09.021
Batcha, Muhammad Azhar Akbar, Tajul Ariffin Norizan, Zulkhairi Zainol Abidin, Zambri Harun, and Wan Hanna Melini Wan Mohtar. "Vortex Measurement at Bell-Shaped Pump Inlet Using Particle Image Velocimetry." Jurnal Kejuruteraan 30, no. 2 (2018): 209-217. https://doi.org/10.17576/jkukm-2018-30(2)-11
Norizan, Tajul Ariffin, Zambri Harun, Shahrir Abdullah, and Wan Hanna Melini Wan Mohtar. "Effects of floor splitter height on the effectiveness of swirl angle reduction in pump intake." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 57, no. 1 (2019): 32-39.
Harun, Zambri, Tajul Ariffin Norizan, Shahrir Abdullah, and Mazharul Islam. "Subsurface Vortex Control Parametric Study at Submersible Pump Intake Using Plate-Type Floor Splitters." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 75, no. 3 (2020): 73-80. https://doi.org/10.37934/arfmts.75.3.7380
Nagahara, Takahide, Toshiyuki Sato, Tomoyoshi Okamura, and Ryuichiro Iwano. "Measurement of the Flow around the Submerged Vortex Cavitation in a Pump Intake by Means of PIV." In Fifth International Symposium on Cavitation, pp. 1-7. 2003.
Li, Songheng, Jose Matos Silva, Yong Lai, Larry J. Weber, and V. C. Patel. "Three-dimensional simulation of flows in practical water-pump intakes." Journal of Hydroinformatics 8, no. 2 (2006): 111-124. https://doi.org/10.2166/hydro.2006.015b
Okamura, Tomoyoshi, Kyoji Kamemoto, and Jun Matsui. "CFD prediction and model experiment on suction vortices in pump sump." In The 9th Asian International Conference on Fluid Machinery, pp. 1-10. 2007.
Zainol, Mohd Remy Rozainy Mohd Arif, I. Abutan, M. Z. Abdullah, and Mohd Ashraf M. I. "Application of Computational Fluid Dynamics (CFD) in Physical Model of Pump Sump to Predict the Flow Characteristics." In Int Conf on Construction and Bldg Tech (ICCBT-2008), pp. 79-90. 2008.
Lucino, Cecilia, Sergio Liscia, and Gonzalo Duro. "Vortex detection in pump sumps by means of CFD." In XXIV Latin American Congress on Hydraulics Punta A Del Este, Uruguay, (IAHR). 2010.
Desmukh, Tanweer S., and V. K Gahlot. "Simulation of flow through a pump sump and its validation." International Journal of Research and Reviews in Applied Sciences 4, no. 1 (2010): 7-17.
Kang, Won-Tae, and Byeong-Rog Shin. "An Investigation of Surface Vortices Behavior in Pump Sump." In 11th Asian Int Conf on Fluid Machinery and 3rd Fluid Power Tech Exh (2011): 592-595.
Rajendran, V. P., S. G. Constantinescu, and V. C. Patel. "Experimental validation of numerical model of flow in pump-intake bays." Journal of hydraulic Engineering 125, no. 11 (1999): 1119-1125. https://doi.org/10.1061/(ASCE)0733-9429(1999)125:11(1119)
Tang, X. L., F. J. Wang, Y. J. Li, G. H. Cong, X. Y. Shi, Y. L. Wu, and L. Y. Qi. "Numerical investigations of vortex flows and vortex suppression schemes in a large pumping-station sump." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 225, no. 6 (2011): 1459-1480. https://doi.org/10.1177/2041298310393447
Zhan, Jie-min, Ben-cheng Wang, Ling-hui Yu, Yok-sheung Li, and Tang Ling. "Numerical investigation of flow patterns in different pump intake systems." Journal of Hydrodynamics, Ser. B 24, no. 6 (2012): 873-882. https://doi.org/10.1016/S1001-6058(11)60315-6
Tawade, M. S., and R. S. Maurya. "Numerical Study of Flow Structure Developing Around Double Suction Pipe of a Pumping System." Procedia Engineering 127 (2015): 809-815. https://doi.org/10.1016/j.proeng.2015.11.416
Qian, ZhongDong, PengFei Wu, ZhiWei Guo, and WenXin Huai. "Numerical simulation of air entrainment and suppression in pump sump." Science China Technological Sciences 59, no. 12 (2016): 1847-1855. https://doi.org/10.1007/s11431-016-0237-8
Issa, Abir, Annie-Claude Bayeul-Lainé, and Gérard Bois. "Numerical Simulation of Flow Field Formed in Water Pump-Sump." In IAHR-24th Symposium on Hydraulic Machinery and Systems, pp. 1-11. 2008.
Chen, Z. M., Y. B. Lee, K. Y. Kim, S. H. Park, and Y. D. Choi. "Effect of suction pipe leaning angle and water level on the internal flow of pump sump." In IOP Conference Series: Earth and Environmental Science, vol. 49, no. 3, p. 032002. IOP Publishing, 2016. https://doi.org/10.1088/1755-1315/49/3/032002
Shin, B. "Numerical Study of Effect of Flow Rate on Free Surface Vortex in Suction Sump." Transactions of the Japan Society for Computational Engineering and Science 2018 (2018).
Zihao, Mi, Zhou Daqing, and Mao Yuanting. "Three-dimensional CFD simulation of inlet structure flow in pumping station based on Eulerian solid-liquid two-phase flow model." Journal of Drainage and Irrigation Machinery Engnieering 33, no. 6 (2015): 494-498.
Shepherd, Jason F., and Chris R. Johnson. "Hexahedral mesh generation constraints." Engineering with Computers 24, no. 3 (2008): 195-213. https://doi.org/10.1007/s00366-008-0091-4
Sosnowski, Marcin, Jaroslaw Krzywanski, and Renata Gnatowska. "Polyhedral meshing as an innovative approach to computational domain discretization of a cyclone in a fluidized bed CLC unit." In E3S Web of Conferences, vol. 14, p. 01027. EDP Sciences, 2017. https://doi.org/10.1051/e3sconf/20171401027
Spiegel, Martin, Thomas Redel, Y. Jonathan Zhang, Tobias Struffert, Joachim Hornegger, Robert G. Grossman, Arnd Doerfler, and Christof Karmonik. "Tetrahedral vs. polyhedral mesh size evaluation on flow velocity and wall shear stress for cerebral hemodynamic simulation." Computer Methods in Biomechanics and Biomedical Engineering 14, no. 01 (2011): 9-22. https://doi.org/10.1080/10255842.2010.518565
Sosnowski, Marcin, Jaroslaw Krzywanski, Karolina Grabowska, and Renata Gnatowska. "Polyhedral meshing in numerical analysis of conjugate heat transfer." In EPJ Web of Conferences, vol. 180, p. 02096. EDP Sciences, 2018. https://doi.org/10.1051/epjconf/201817002096
Sosnowski, Marcin. "The influence of computational domain discretization on CFD results concerning aerodynamics of a vehicle." Journal of Applied Mathematics and Computational Mechanics 17, no. 1 (2018): 79-88. https://doi.org/10.17512/jamcm.2018.1.08
Sosnowski, Marcin, Renata Gnatowska, Karolina Grabowska, Jarosław Krzywański, and Arkadiusz Jamrozik. "Numerical analysis of flow in building arrangement: Computational domain discretization." Applied Sciences 9, no. 5 (2019): 941. https://doi.org/10.3390/app9050941
Sosnowski, Marcin, Renata Gnatowska, Jacek Sobczyk, and Waldemar Wodziak. "Computational domain discretization for CFD analysis of flow in a granular packed bed." Journal of Theoretical and Applied Mechanics 57, no. 4 (2019): 833-842. https://doi.org/10.15632/jtam-pl/112017
American National Standards Institute. American national standard for rotodynamic pumps for pump intake design. Hydraulic Institute, 2018.
Rudolf, Pavel, and Roman Klas. "Numerical simulation of pump-intake vortices." In EPJ Web of Conferences, vol. 92, p. 02077. EDP Sciences, 2015. https://doi.org/10.1051/epjconf/20159202077
