Publisher · Educational Consultant · Event Management

Selangor, Malaysia

admin@semarakilmu.com.my

Journal of Advanced Research in Micro and Nano Engineering

Journal of Advanced Research in Micro and Nano Engineering

Engineering and Technology

Current Issue

Aims & Scope

Journal of Advanced Research in Micro and Nano Engineering is a peer-reviewed international journal, collects original contributions in all major area of micro- and nano engineering. The journal covers fundamental and applied research in all disciplines of science, engineering and medicine. Scope of the journal includes materials synthesis, processing, fabrication, spectroscopy, properties, biological systems, micro- and nanostructures, theory and computation, etc.

Submit Your Article here

MOST CITED ARTICLES

Effects of The Optimal Imposition of Viscous and Thermal Forces on Spectral Dynamical Features of Swimming of a Microorganism in Nanofluids
Shervin Sharafatmandjoor, C‎. ‎S‎. ‎Nor Azwadi

Effects of Solar Radiation and Viscous Dissipation on Mixed Convective Non-Isothermal Hybrid Nanofluid over Moving Thin Needle
Sultana Jahan et al

Performance of Solar Thermal Collector Using Multi-Walled Carbon Nanotubes: Simulation Study
Omer A. Alawi, Haslinda Mohamed Kamar

Editorial Team

Editor-in-Chief

Dr. Fauzan Ahmad
Malaysia-Japan International Institute of Technology,
Universiti Teknologi Malaysia, Malaysia

Associate Editors

Dr. Muhammad Noor Nordin (E-mail)
British Malaysia Institue, Universiti Kuala Lumpur, Malaysia

Mazlan Mohamed (E-mail)
Fakulti Biokejuruteraan Dan Teknologi, Universiti Malaysia Kelantan, Malaysia

Funmilayo Oyelami(E-mail:oyelamifunmilayo@abuad.edu.ng)
Department of Mathematical and Physical Sciences, Afe Babalola University, Ado-Ekiti, Nigeria

Dr. Raheem K. Ajeel(E-mail:raheem@ukm.edu.my)
Solar Energy Reasearch Institute, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia

Professor Talal Yusaf(E-mail:t.yusaf@cqu.edu.au)
School of Engineering and Technologies, Central Queensland University, Rockhampton, QLD 4701, Australia

Rui He(Email: henry-hr@zju.edu.cn)
College of Civil Engineering and Architecture, Zhejiang Univ., Hangzhou 310027, PR China.

Mohammad Khairul Azhar Abdul Razab (E-mail)
Medical Radiations Programme, Universiti Sains Malaysia Health Campus, Malaysia

Dr. Jawad Raza (E-mail)
Universiti Utara Malaysia, Malaysia

Dr. Khairul Fadzli Samat (E-mail)
Fakulti Kejuruteraan Pembuatan, Universiti Teknikal Malaysia Melaka, Malaysia

Siti Fairuz Yusoff (E-mail)
Faculty of Technical and Vocational, Universiti Pendidikan Sultan Idris, Malaysia

Dr. Ervina Efzan Mhd Noor (E-mail)
Faculty of Engineering and Technology, Multimedia University,
Melaka, Malaysia

Dr. Fauzan Ahmad (E-mail)
Malaysia-Japan International Institute of Technology,
Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia

Dr. Liew Pay Jun (E-mail)
Faculty of Manufacturing Engineering,
Universiti Teknikal Malaysia Melaka, Melaka, Malaysia

 

Associate Editors

Dr. Natrah Kamaruzaman (E-mail)
School of Mechanical Engineering, Faculty of Engineering,
Universiti Teknologi Malaysia, Johor, Malaysia

Dr. Nur Azmah Nordin (E-mail)
Malaysia-Japan International Institute of Technology, 
Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia

Dr. Omer Adnan Alawi (E-mail)
Research Management Center, 
Universiti Teknologi Malaysia, Johor, Malaysia

Dr. Shahira Liza Kamis (E-mail)
Malaysia-Japan International Institute of Technology, 
Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia

Ts. Dr. Siti Aishah Abdul Aziz (E-mail)
Malaysia-Japan International Institute of Technology, 
Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia

Dr. Alok Kumar Pandey (E-mail: mr.alokpandey1@gmail.com)
Department of Mathematics, Graphic Era Deemed to be University, India

Dr. Siti Hamidah Mohd Setapar (E-mail)
Malaysia-Japan International Institute of Technology, 
Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia

Dr. Ummikalsom Abidin (E-mail)
School of Mechanical Engineering, Faculty of Engineering,
Universiti Teknologi Malaysia, Johor, Malaysia

Dr. Manjeet Kumar(Email:manjit.msc@gmail.com)
Department of Mathematics, Dr. B.R. Ambedkar Govt. College,
Dabwali-125104, Haryana, India

Mohamed El Malki (Email:m.elmalki@ump.ac.ma)
Department of Physics, Faculty of Sciences, Mohammed First University, Morocco

Dr. Farhan Lafta Rashid (Email: farhan.lefta@uokerbala.edu.iq)
Petroleum Engineering Department, College of Engineering, University of Kerbala, Iraq

Anderson S. H. Chu (E-mail: shchu@connect.hku.hk)
Micromechanics and Composite Materials, Columbia University, New York, USA

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences

Engineering and Technology

Current Issue

About the Journal

This journal welcomes high-quality original contributions on experimental, computational, applied mathematics and physical aspects of fluid mechanics and thermal sciences relevant to engineering or the environment, multiphase and microscale flows, microscale electronic and mechanical systems; medical and biological systems; and thermal and flow control in both the internal and external environment.

Submit Your article here

MOST CITED ARTICLES

Water transport properties of bio-nanocomposites reinforced by sugar palm (arenga pinnata) nanofibrillated cellulose
Ilyas, R.A., Sapuan, S.M., Ishak, M.R., Zainudin, E.S.

Slip effects on peristaltic transport of Casson fluid in an inclined elastic tube with porous walls
Gudekote, M., Choudhari, R.

Analysis of MHD Jeffery Hamel flow with suction/injection by homotopy analysis method method
Hamrelaine, S., Mebarek-Oudina, F., Sari, M.R.

Editorial Team

Editor-in-Chief

Dr. Juntakan Taweekun (E-mail)
Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Songkhla, Thailand

Associate Editors

Dr. Zafar Said (E-mail)
College of Engineering, Sustainable & Renewable Energy Engineering Department, University of Sharjah, United Arab Emirates

Dr. Muhammad Noor Afiq Witri Muhammad Yazid (E-mail)
Universiti Teknologi Malaysia, Malaysia

Dr. Raoudha Chaabane (E-mail)
National Engineering School, Monastir University, Tunisia

Dr. Shervin Sharafatmandjoor (E-mail)
Islamic Azzad University, Tehran, Iran

Mohd Noor Asril Saadun (E-mail)
Universiti Teknikal Malaysia Melaka, Malaysia

Ahmad Hilmi Khalid (E-mail)
Universiti Teknologi MARA, Malaysia

Dr. Haslinda Mohamed Kamar (E-mail)
Universiti Teknologi Malaysia, Malaysia

Dr. Saeed Jamei
Persian Gulf University, Iran

Dr. M’hamed Beriache (E-mail)
Université Hassiba Benbouali, Algeria

Dr. Reazul haq Abdul Haq (E-mail)
Universiti Tun Hussein Onn Malaysia, Malaysia

Dr. Fudhail Abdul Munir (E-mail)
Universiti Teknikal Malaysia Melaka, Malaysia

Dr. Muhammadu Masin Muhammadu (E-mail)
Federal University of Technology, Nigeria

Dr. Shabudin Mat (E-mail)
Universiti Teknologi Malaysia, Malaysia

Dr. Muhamad Zaini Yunos (E-mail)
Universiti Tun Hussein Onn Malaysia, Malaysia

Mahmud Jamil Muhammad (E-mail)
Nigerian Defence Academy, Kaduna, Nigeria

Prof. Dr. Saidur Rahman (E-mail)
Sunway University, Malaysia

Alireza Fazeli (E-mail)
Western University, Canada

Tey Wah Yen (E-mail)
UCSI University, Malaysia

Dr. Wadhah Hussein Abdulrazzaq Al Doori (E-mail)
Tikrit University, Iraq

Dr. Gangtao Liang (E-mail)
Dalian University of Technology, China

Dr. Syahrullail Samion (E-mail)
Universiti Teknologi Malaysia, Malaysia

 

Associate Editors
Dr. Nik Ahmad Ridhwan bin Nik Mohd (E-mail)
Universiti Teknologi Malaysia, Malaysia

Dr. Al Emran Ismail (E-mail)
Universiti Tun Hussein Onn Malaysia, Malaysia

Dr. Khalid Saqr (E-mail)
Arab Academy for Science, Technology and Maritime Transport, Egypt

Dr. Ehsan Kianpour (E-mail)
Islamic Azad University of Najaf Abad, Iran

Dr. Mohd Faizal Hasan (E-mail)
Universiti Teknologi Malaysia, Malaysia

Dr. Said Ahmad (E-mail)
Universiti Tun Hussein Onn Malaysia, Malaysia

Dr. Natrah Kamaruzaman (E-mail)
Universiti Teknologi Malaysia, Malaysia

Dr. Zurriati Mohd Ali (E-mail)
Universiti Teknologi MARA, Malaysia

Mohamad Shukri Zakaria (E-mail)
Universiti Teknikal Malaysia Melaka, Malaysia

Saidu Bello AbuBakar (E-mail)
Kano University of science and Technology, Nigeria

Dr. Ihsan Ali Ghani (E-mail)
Al-Mustansiriyah University, Iraq

Dr. Hussein Mohammed (E-mail)
Duhok Polytechnic University (DPU), Iraq

Dr. Maizirwan Mel (E-mail)
International Islamic University Malaysia, Malaysia

Dr. Hasan KÖTEN (E-mail)
Istanbul Medeniyet University, Turkey

Dr. Mohd Nasrun Mohd Nawi (E-mail)
Universiti Utara Malaysia, Malaysia

Raheem Kadhim Ajeel (E-mail)
University of Babylon, Iraq

Dr. G. Najafi (E-mail)
Tarbiat Modares University, Tehran, Iran

Dr. Mehaboob Basha (E-mail)
King Fahd University of Petroleum & Minerals, Saudi Arabia

Mohammed W. Muhieldeen Al-Gailani (E-mail)
UCSI University, Malaysia

Dr. Syed Ali Ammar Taqvi (E-mail)
NED University of Engineering and Technology Karachi, Pakistan

Prof. Cesare Biserni  (E-mail)
Department of Industrial Engineering, University of Bologna, Italy

CFD Letters

CFD Letters

Engineering and Technology

Current Issue

Aims & Scope

CFD Letters publishes as rapidly as possible manuscripts of high quality which addresses eminent topics of computational fluid dynamics theory and applications. Being an international, peer-reviewed, online and open access journal, CFD Letters presents a world-wide forum for the dissemination of knowledge among engineers, scientists and mathematicians working in the field of computational fluid mechanics.

Submit Your article here

MOST CITED ARTICLES

Mesh optimization for ground vehicle Aerodynamics
Ahmad, N.E., Abo-Serie, E., Gaylard, A.

Experiments and numerical simulations on the aerodynamics of the ahmed body
Meile, W., Brenn, G., Reppenhagen, A., Lechner, B., Fuchs, A.

Analysis of area ratio in a CD nozzle with suddenly expanded duct using CFD method
Khan, S.A., Aabid, A., Ghasi, F.A.M., Al-Robaian, A.A., Alsagri, A.S.

Editorial Team

Editor-in-Chief

Dendy Adanta
Department of Mechanical Engineering,
Faculty of Engineering, Universitas Sriwijaya,
Indralaya-30662, South Sumatera,
INDONESIA

Associate Editors

Ali Cemal Benim
Department of Mechanical Engineering and Process Technology, Düsseldorf University of Applied Sciences, GERMANY

Sergei Utyuzhnikov
School of Mechanical, Aerospace and Civil Engineering, University of Manchester, U.K

Abdellah Hadjadj
National Institute of Applied Sciences of Rouen, FRANCE

Mohamed Gad-el-Hak
Department of Mechanical Engineering, Virginia Commonwealth University, U.S.A

Mahmood Khalid
Institute for Aerospace Research National Research Council CANADA

Chunlei Liang
Department of Mechanical and Aerospace Engineering, George Washington University, U.S.A

Bin Zhao
Department of Building Science, School of Architecture, Tsinghua University, CHINA

Mazlan Abdul Wahid 
Department of Thermofluids, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, MALAYSIA

Karim Shalash 
Institute of Mechanical Engineering, École polytechnique fédérale de Lausanne, SWITZERLAND

Iham Farid Zidane
ICollege of Engineering and Technology, Arab Academy for Science, Technology and Maritime Transport, EGYPT

 

Associate Editors

Essam M. Wahba
College of Engineering, American University in Sharjah, U.A.E

Mohammad Rasul
Faculty of Science, Engineering and Health, Central Queensland University, AUSTRALIA

Jamal Naser
Faculty of Engineering & Industrial Science, Swinburne University of Technology – AUSTRALIA

Essam Eldin Khalil
Professor of Mechanical Engineering, Cairo University, Cairo- EGYPT

Mohamed Teamah
College of Engineering and Technology, Arab Academy for Science, Technology and Maritime Transport, EGYPT

Kamal Abdel Aziz Ibrahim
Faculty of Engineering, Menoufiya University, EGYPT

Raed I. Bourisli
Mechanical Engineering Department, College of Engineering and Petroleum, Kuwait University, KUWAIT

Hamdy Kandil
Faculty of Engineering & Material Science, German University in Cairo- EGYPT

Dr. Mohammad AL-Rawi
Centre for Engineering and Industrial Design, Waikato Institute of Technology, Hamilton, NEW ZEALAND

Dr. Kamarul Arifin Ahmad
Department of Aerospace Engineering, Universiti Putra Malaysia, MALAYSIA

Journal of Advanced Research in Applied Sciences and Engineering Technology

Journal of Advanced Research in Applied Sciences and Engineering Technology

Engineering and Technology

Current Issue

About the Journal

Journal of Advanced Research in Applied Sciences and Engineering Technology is an international forum for the publication and dissemination of original work which contributes to greater scientific understanding in the area of applied sciences and engineering technology. The Journals reports principally the achievements spanning the interdisciplinary field of applied researches. Scope of the journal includes: biology, chemistry, physics, environmental, health science, mathematics and statistics, geology, engineering, computer science, natural and technological sciences, medicine, and architecture.

Submit Your article here

MOST CITED ARTICLES

Renewable Energy of Rice Husk for Reducing Fossil Energy in Indonesia,
Lubis

Global energy security and European Union: A review,
Khattak et al

MHD Flow and Heat Transfer of Double Stratified Micropolar Fluid over a Vertical Permeable Shrinking/Stretching Sheet with Chemical Reaction and Heat Source,
Khan et al

Editorial Team

Editor-in-Chief

Dr. Nor Azwadi Che Sidik(E-mail)
Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia

Associate Editors

Putri Shareen Rosman (E-mail)
Faculty of Applied Science, Universiti Teknologi MARA, Malaysia

Norbaiti Tukiman (E-mail)
Faculty of Computer and Mathematical Sciences, Universiti Teknologi MARA, Malaysia

Dr Zairi Ismael Rizman (E-mail)
School of Electrical Engineering, College of Engineering, Universiti Teknologi MARA, Malaysia

Tey Wah Yen (E-mail)
Department of Mechanical Engineering, Faculty of Engineering, UCSI University, Malaysia

Dr. Wan Zuki Azman Wan Muhamad (E-mail)
Institute of Engineering Mathematics, Universiti Malaysia Perlis, Malaysia

Norhisyam Jenal (E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi MARA, Malaysia

Dr. Zainiharyati Mohd Zain (E-mail)
School of Chemistry and Environment, Faculty of Applied Sciences, Universiti Teknologi MARA (UiTM) Shah Alam, Selangor Malaysia

Mohd Zulkahiri Mat Salleh (E-mail)
Faculty of Civil Engineering, Universiti Teknologi MARA, Malaysia

Dr. Syahrullail Samion (E-mail)
School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Malaysia

Hazimi Ismail (E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi MARA, Malaysia

Dr Khairuddin Md Isa (E-mail)
School of Environmental Engineering, Universiti Malaysia Perlis, Malaysia

Sunny Goh Eng Giap (E-mail)
Faculty of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu, Terengganu, Malaysia

MD Azree Othuman Mydin (E-mail)
School of Housing, Building and Planning, Universiti Sains Malaysia, Penang, Malaysia

 

International Advisory Panel

Dr. Osamah Siddiqui (E-mail)
Faculty of Engineering and Applied Science, University of Ontario Institute of Technology Oshawa, ON, Canada

Prof. G. Sarojamma (E-mail)
Department of Applied Mathematics, Sri Padmavati Womens University, India

Dr. Mahmoud Ahmed Alamir (E-mail)
College of Science and Engineering, Flinders University, Australia

Dr. Shervin Sharafatmandjoor (E-mail)
Department of Mechanical and Aerospace Engineering, Islamic Azzad University, Tehran, Iran

Dr. Syed Ali Ammar Taqvi (E-mail)
Department of Chemical Engineering, NED University of Engineering and Technology Karachi, Pakistan

Dr. Mohammad Sharif Zami (E-mail)
Department of Architecture, King Fahd University of Petroleum & Minerals, Saudi Arabia

Mahmud Jamil Muhammad (E-mail)
Department of Mechanical Engineering, Nigerian Defence Academy, Kaduna, Nigeria

Dr. Ehsan Kianpour (E-mail)
Faculty of Engineering, Islamic Azad University of Najaf Abad, Iran

Mohammad Didarul Alam (E-mail)
School of Biomedical, Materials and Mechanical Engineering, Florida International University (FIU), Florida, United States of America

Dr. Muhammadu Masin Muhammadu (E-mail)
Department of Mechanical Engineering, Federal University of Technology, Nigeria

Dr. M’hamed Beriache (E-mail)
Department of Mechanical Engineering, Faculty of Technology, Université Hassiba Benbouali, Algeria

Dr. Saeed Jamei
Department of Engineering, Faculty of Engineering, Persian Gulf University, Iran

Prof. Said E. El-Khamy (E-mail)
Department of Electrical Engineering, Faculty of EngineeringAlexandria University, Egypt

Journal of Advanced Research in Applied Mechanics

Journal of Advanced Research in Applied Mechanics

Engineering and Technology

Current Issue

About the Journal

The journal is concerned with high-level investigations of modern physical and mechanical problems and reports current progress in this field. The journal also encourages contributions from the newly emerging areas such as biomechanics, electromechanics, the mechanical behavior of advanced materials, nanomechanics, and many other inter-disciplinary research areas in which the concepts of applied mechanics are extensively applied and developed.

Submit Your Article Here

MOST CITED ARTICLES

Effect of thermal insulation on building thermal comfort and energy consumption in Egypt,
Morsy, M., Fahmy, M., Abd Elshakour, H., Belal, A.M.

Sustainable power generation pathways in Malaysia: Development of long-range scenarios,
Samsudin, M.S.N., Rahman, M.M., Wahid, M.A.

A simulation on the effect of ultrasonic vibration on ultrasonic assisted soldering of Cu/SAC305/Cu joint,
Sharaf, Hussein, Jalil, Nawal Aswan Abdul, Salman, Sadeq

Editorial Team

Editor-in-Chief

Dr. Mohd Yazid Yahya(E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Malaysia

Associate Editors

Dr. Reazul haq Abdul Haq (E-mail)
Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Malaysia

Dr. Mohd Kameil Abdul Hamid (E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Malaysia

Matzaini Katon (E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi MARA, (Terengganu Campus) Malaysia

Ir. Dr.-Ing. Azrul Azwan Abdul Rahman (E-mail)
Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Malaysia

Dr. Nurul Aini Bani (E-mail)
Razak Faculty of Technology & Informatics, Universiti Teknologi Malaysia, Malaysia

Siti Khadijah Alias (E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi MARA, Malaysia

Mohd Noor Halmy Ab Latif (E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi MARA, Malaysia

Dr. Fudhail Abdul Munir (E-mail)
Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Malaysia

Nursabillilah Mohd Ali (E-mail)
Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka, Malaysia

Dr. Rahimah Muhamad (E-mail)
Fakulti Teknologi & Informatik Razak, Universiti Teknologi Malaysia, Malaysia

Associate Editors (International)

Dr. Muhammadu Masin Muhammadu (E-mail)
Department of Mechanical Engineering, Federal University of Technology, Nigeria

Dr. Makatar Wae-hayee (E-mail)
Graduate School, Prince of Songkla University, Songkhla, Thailand

Alireza Fazeli (E-mail)
Department of Applied Mathematics, Western University, Canada

Dr. Hussein Mohammed (E-mail)
Energy & Chemical Engineering, Curtin University, Australia

Dr. B. Lavanya (E-mail)
Department of Mathematics, MIT MAHE, India

Dr. Guilherme Moura Paredes (E-mail)
Development and Research in Environment, Applied Management and Space, Aalborg University, Denmark

Dr. Suhail Kazi (E-mail)
Faculty of Engineering Science and Technology, Isra University, Hyderabad, Sindh, Pakistan

Dr. Albashir Adel Youssef (E-mail)
Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Arab Academy for Science, Technology and Maritime Transport, Cairo, Egypt

Dr. Dendy Adanta (E-mail)
Department of Mechanical Engineering, Faculty of Engineering, Sriwijaya University, Indonesia

Dr. Wadhah Hussein Abdulrazzaq Al Doori (E-mail)
Faculty of Mechanical Engineering, Tikrit University, Iraq

Dr. Waqas Khalid (E-mail)
Department of Mechanical Engineering, National University of Sciences and Technology (NUST), Pakistan

Journal of Advanced Research in Numerical Heat Transfer

Journal of Advanced Research in Numerical Heat Transfer

Engineering and Technology

Current Issue

Aims & Scope

Journal of Advanced Research in Numerical Heat Transfer provides a worldwide platform for researchers, engineers, scientists and mathematicians to disseminate novel ideas, share preliminary findings of ongoing investigations, discussions, and criticisms in the field of heat transfer. This journal is a peer-review international journal that focuses on numerical solutions, with an emphasis on contributions which increase the basic understanding of the heat transfer mechanism and their application to engineering problems. Experimental research which supports the numerical solutions are also acceptable.

Submit Your article here

CURRENT ISSUE

Vol. 14 No. 1: September (2023)

In Progress

Editorial Team

Editor-in-Chief

Dr. Wan Mohd. Arif Aziz Japar (E-mail)
Universiti Teknologi Malaysia, Malaysia

Associate Editors

Prof. Dr. Anuar Ishak (E-mail)
School of Mathematical Sciences, Universiti Kebangsaan Malaysia, Malaysia

Dr. Yu Kok Hwa (E-mail)
School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia, Malaysia

Dr. Ahmad Muhsin Ithnin (E-mail)
Malaysia-Japan International Institute of Technology, Universiti Teknology Malaysia, Malaysia

Dr. Jawad Raza (E-mail)
Universiti Utara Malaysia, Malaysia

Professor Dr. Mazlan Abdul Wahid (E-mail)
School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Malaysia

Assoc. Prof. Dr. Wan Azmi (E-mail)
Faculty of Mechanical Engineering, Universiti Malaysia Pahang, Malaysia

Dr. Mohammad Rasidi Mohammad Rasani (E-mail)
Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Malaysia

Dr. Chan Sze Qi (E-mail)
Faculty of Applied Sciences and Technology, Universiti Tun Hussein Onn Malaysia, Malaysia

Dr. Mohammed W. Muhieldeen Al-Gailani (E-mail)
Faculty of Engineering, Technology and Built Environment, UCSI University,
Kuala Lumpur, Malaysia

Dr. Nurhazimah Nazmi (E-mail)
Malaysia-Japan International Institute of Technology,
Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia

Dr. Omer Adnan Alawi (E-mail)
Research Management Center,
Universiti Teknologi Malaysia, Johor, Malaysia

Ir. Dr. Mohd Rosdzimin ABdul Rahman (E-mail)
Faculty of Engineering, Universiti Pertahanan Nasional Malaysia,
Kuala Lumpur, Malaysia

Dr. Siti Ujila Masuri (E-mail)
Department of Mechanical and Manufacturing Engineering,
Universiti Putra Malaysia, Selangor, Malaysia

 

International Advisory Panel

Dr. Osamah Siddiqui (E-mail)
University of Ontario Institute of Technology Oshawa, ON, Canada

Dr. Alok Kumar Pandey (E-mail: mr.alokpandey1@gmail.com)
Department of Mathematics, Graphic Era Deemed to be University, India

Assoc. Prof. Dr. Chungpyo Hong (E-mail)
Dept. Mechanical Eng.,Kagoshima University, Japan

Assistant Professor Dr. N. Vishnu Ganesh (E-mail)
Department of Mathematics, Ramakrishna Mission Vivekananda College, Mylapore, India

Dr. Vahid Beygzade (E-mail)
Urmia University of Technology, Iran

Dr. Mahmoud Ahmed Alamir (E-mail)
College of Science and Engineering, Flinders University, Australia

Muhammad Sohail (E-mail)
Institute of Space Technology, Islamabad, Pakistan

Dr. Ali Mohammed Hayder (E-mail)
Technical university in Najaf, Iraq

Dr. Jafar Hasnain (E-mail)
Department of Computer Science, Bahria University Islamabad, Islamabad, Pakistan

Dr. Mohamed Rabea Eid (E-mail)
Department of Mathematics, Faculty of Science, New Valley University, Al-Wadi Al-Gadid, Egypt

Dr. Hamzeh Taha Salman Alkasasbeh (E-mail)
Department of Mathematics, Ajloun National University, Jordan

Dr. Wadhah Hussein Al Doori (E-mail)
Petroleum and Gas Refining Engineering Department,
College of Petroleum Processes Engineering, Tikrit University, Iraq