About the Journal

Journal of Advanced Research in Micro and Nano Engineering (ARMNE) is a peer-reviewed international journal, collects original contributions in all major area of micro- and nano engineering. The journal covers fundamental and applied research in all disciplines of science, engineering and medicine. Scope of the journal includes materials synthesis, processing, fabrication, spectroscopy, properties, biological systems, micro- and nanostructures, theory and computation, etc.

EVENTS UPDATE

Join us at the 9th International Symposium on Fluid Mechanics and Thermal Sciences (9th-ISFMTS2025), hosted by Semarak Ilmu Sdn. Bhd., on 16th April 2025 at the Everly Hotel, Putrajaya, Malaysia. […] Find out more Join us virtually for the Semarak International Research Innovation Symposium IV (SIRIS IV), hosted by Semarak Ilmu Sdn. Bhd., on 30th April 2025. This exciting event will bring together [...] Find out more The primary aim of this conference is to establish itself as the premier annual gathering in the dynamic realms of Applied Science and Engineering, Advanced Technology, Applied Mechanics, Fluid Mechanics, […] Find out more

Most cited articles (Source: SCOPUS)

Effects of The Optimal Imposition of Viscous and Thermal Forces on Spectral Dynamical Features of Swimming of a Microorganism in Nanofluids, Shervin Sharafatmandjoor, C‎. ‎S‎. ‎Nor Azwadi

Effects of Solar Radiation and Viscous Dissipation on Mixed Convective Non-Isothermal Hybrid Nanofluid over Moving Thin Needle, Sultana Jahan et al

Performance of Solar Thermal Collector Using Multi-Walled Carbon Nanotubes: Simulation Study, Omer A. Alawi, Haslinda Mohamed Kamar

Current Issue

Vol. 30 No. 1: April (2025)
View Vol. 30 No. 1: April (2025)

EDITOR'S CHOICE

Correlation Between Resistance and Peel Test on Difference Curing Temperature in Nano-Silver/Nano-Graphene Conductive Paste

Norida Mohammad Noor, Mohd Azli Salim, Nor Azmmi Masripan, Chonlatee Photong, Chew Kit Wayne, Alan Watson

Published: 2025-02-28

Articles

  • Nutritional Requirement of Newly Isolated Wild Strain Acetobacter tropicalis for the Improvement of Acetic Acid Production

    Yashini K Selvanathan, Nor Hasmaliana Abdul Manas, Joseph Ikwebe, Nasratun Masngut
    1-9
    DOI: https://doi.org/10.37934/armne.30.1.19

  • Phase Formation and Microstructure Properties of Autoclaved Aerated Concrete (AAC) Based on Ceramic and Gypsum Waste (CGW) as Raw Material Addition

    Nur Farisyah Hidayah Zambri, Efil Yusrianto, Noraini Marsi, Izzati Abdul Manaf, Hafizuddin Hakim Shariff
    10-21
    DOI: https://doi.org/10.37934/armne.30.1.1021

  • Stress Analysis on Hybrid Nanoparticle GNP/Ag for Flexible Semiconductor Packaging Devices

    Norida Mohammad Noor, Mohd Azli Salim, Nor Azmmi Masripan, Chonlatee Photong , Chew Kit Wayne, Alan Watson
    22-32
    DOI: https://doi.org/10.37934/armne.30.1.2232

  • Correlation Between Resistance and Peel Test on Difference Curing Temperature in Nano-Silver/Nano-Graphene Conductive Paste

    Norida Mohammad Noor, Mohd Azli Salim, Nor Azmmi Masripan, Chonlatee Photong, Chew Kit Wayne, Alan Watson
    33-47
    DOI: https://doi.org/10.37934/armne.30.1.3347

  • Prediction of Binary Adsorption Isotherms of Carbon Dioxide and Methane from Pure Adsorption Data

    Marhaina Ismail, Mohamad Azmi Bustam, Yeong Yin Fong, Aqeel Ahmad
    48-57
    DOI: https://doi.org/10.37934/armne.30.1.4857

  • Extraction Process of O-Coumaric Acid from Gliricidia Sepium Leaves: Optimization and Kinetic Studies

    Siti Zalina Yaacob Yaacob, Luqman Chuah Abdullah, Norhafizah Abdullah, Chuan Li Lee, Kit Ling Chin, Hong-Wei Xiao
    58-80
    DOI: https://doi.org/10.37934/armne.30.1.5880

  • Enhancing β-Cyclodextrin Production by Immobilization of Recombinant Escherichia coli on Hollow Fiber Membrane: Screening the Reaction Parameters by Full Factorial Design

    Rohaida Che Man, Siti Kholijah Abdul Mudalip, Siti Zubaidah Sulaiman, Laura Navika Yamani, Zatul Iffah Mohd Arshad
    81-92
    DOI: https://doi.org/10.37934/armne.30.1.8192

  • Passively Q-Switched Erbium-Doped Fiber Laser with Tris (8-hydroxyquinolinato) Aluminium (Alq3) Film Saturable Absorber

    Farina Saffa Mohamad Samsamnun, Mohd Arif Mohd. Sarjidan, Nur Farhanah Zulkipli, Zurida Ishak, Norliana Muslim, Ahmad Haziq Aiman Rosol, Afiq Arif Aminuddin Jafry, Siti Sarah Md Sallah, Md Ashadi Md Johari, Sulaiman Wadi Harun, Retna Apsari
    93-100
    DOI: https://doi.org/10.37934/armne.30.1.93100

  • Removal of Lead (Pb) Ions by using the Integral Membrane Incorporated with Silica from Rice Husk Ash

    Hasminah Abbas, Norin Zamiah Kassim Shaari
    101-114
    DOI: https://doi.org/10.37934/armne.30.1.101114

  • Effect of Forming Pressure on the Microstructure and Mechanical Characteristics of Dense Porous Ceramics

    Mohamed Lokman Jalaluddin, Umar Al-Amani Azlan, Mohd Warikh Abd Rashid, Norfauzi Tamin, Mohamad Najmi Masri, Muchlis Muchlis
    115-129
    DOI: https://doi.org/10.37934/armne.30.1.115129
View All Issues

Publishing Model
Open access

Article Processing Charge (APC)
All articles published in this journal are open access and freely available online, free to download, share and re-use. To cover the cost of providing open access, Akademia Baru charges an Article Processing Charge (APC) once an article is accepted for publication. There are no charges for rejected articles, no submission charges, and no surcharges based on the length of an article, tables, figures or supplementary data.

The APC charged for accepted articles;
Ringgit Malaysia, RM2500 (International Corresponding Author) or RM2000 (Malaysian Corresponding Author).