Ternary Molten Salt as a Phase Change Material: A Review

Authors

  • Li Li Faculty of Electrical Engineering, Changchun Automobile Industry College, Changchun, Jilin, China
  • Muhamad Mat Noor Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah 26600 Pekan, Malaysia
  • Kumaran Kadirgama Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah 26600 Pekan, Malaysia
  • Lingenthiran Samylingam Faculty of Engineering and Technology, Multimedia University, Bukit Beruang, 75450 Melaka, Malaysia
  • Santhanam Harikrishnan Department of Mechanical Engineering, Kings Engineering College, Chennai, India

DOI:

https://doi.org/10.37934/arfmts.125.2.129144

Keywords:

PCM, molten salt, CSP

Abstract

Phase change materials have gained much attention due to their excellent properties. This research paper delves into the utilization of ternary molten salt as a thermal storage medium for Thermal Energy Storage (TES) within the context of Concentrated Solar Power (CSP) systems. Meanwhile, different types and compositions of molten salts are discussed in detail in this paper. Molten salts are used extensively as heat transfer media and in the production of solar power because of their special qualities and affordable cost. Nitrates are less expensive, less corrosive, and do not break down below 500 °C when compared to other molten salts. For this reason, the primary heat storage component of solar power generation is mixed molten nitrate salts.

Downloads

Download data is not yet available.

Author Biographies

Li Li, Faculty of Electrical Engineering, Changchun Automobile Industry College, Changchun, Jilin, China

76108223@126.com

Muhamad Mat Noor, Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah 26600 Pekan, Malaysia

muhamad@umpsa.edu.my

Kumaran Kadirgama, Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah 26600 Pekan, Malaysia

kumaran@umpsa.edu.my

Lingenthiran Samylingam, Faculty of Engineering and Technology, Multimedia University, Bukit Beruang, 75450 Melaka, Malaysia

lingenthiran@mmu.edu.my

Santhanam Harikrishnan, Department of Mechanical Engineering, Kings Engineering College, Chennai, India

ramhkn@gmail.com

Published

2024-12-20

How to Cite

Li, L. ., Noor, M. M. ., Kadirgama, K. ., Samylingam, L. ., & Harikrishnan, S. . (2024). Ternary Molten Salt as a Phase Change Material: A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 125(2), 129–144. https://doi.org/10.37934/arfmts.125.2.129144

Issue

Section

Articles

Most read articles by the same author(s)