Heat Transport at Solid-Liquid Interfaces between Face-Centered Cubic Lattice and Liquid Alkanes

Abdul Rafeq Saleman; Fudhail Abdul Munir; Mohd Rody Mohammad Zin; Mohd Shukri Yob; Gota Kikugawa; Taku Ohara

Authors

Abdul Rafeq Saleman entre of Advanced Research on Energy, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
Fudhail Abdul Munir entre of Advanced Research on Energy, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
Mohd Rody Mohammad Zin Centre of Advanced Research on Energy, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
Mohd Shukri Yob Centre of Advanced Research on Energy, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
Gota Kikugawa Institute of Fluid Science, Tohoku University, 2-1-1 Katahira Aoba-ku, Sendai 980-8577, Japan
Taku Ohara Institute of Fluid Science, Tohoku University, 2-1-1 Katahira Aoba-ku, Sendai 980-8577, Japan

Keywords:

Solid-liquid interfaces , thermal boundary resistance , thermal energy transfer, molecular dynamics simulations

Abstract

Solid-liquid (S-L) interfaces is widely used in lubrication and coating systems, in which the heat transport is the main problem for the system. In the recent years, lubrication and coating systems have been investigated up to the molecular scale to solve the problem of heat transport due to wear and friction. In molecular scale, the characteristics of heat transport are different from the conventional one. Therefore, the purpose of this study is to specifically investigate the characteristics of heat transport in the molecular scale at the S-L interfaces. The prime concern in this numerical investigation is the surface structure of solid and the type of liquid molecules. The characteristics of heat transport at the S-L interfaces are evaluated based on the temperature jump (TJ) and thermal boundary resistance (TBR) at the interfaces. It is found that the different TJs and TBRs can be observed for variation of the surface structures and the length of liquid molecules. The obtained results show that the surface structures and length of liquid molecules significantly affect the characteristics of heat transport at S-L interfaces.