Base and Wall Pressure Control using Cavities and Ribs in Suddenly Expanded Flows-An Overview

Vigneshvaran Sethuraman; Parvathy Rajendran; Sher Afghan Khan

Authors

Vigneshvaran Sethuraman School of Aerospace Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang, Malaysia
Parvathy Rajendran School of Aerospace Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang, Malaysia
Sher Afghan Khan Department of Mechanical Engineering, International Islamic University Malaysia, 53100 Kuala Lumpur, Malaysia

Keywords:

Base pressure, cavities, ribs, suddenly expanded flows, wall pressure

Abstract

An understanding of fluid flow in sudden expansion has resulted in a great deal of research work in this area. Of particular interest is the study of base drag which influences the performance of automotive vehicles, aircraft and missiles. Problems of fuel mixing in combustion chambers and reduction of specific fuel consumption are also governed by the phenomenon of base drag. It is the aim of this study to present a brief review of the work carried out in the area of sudden expansion in aduct with particular accent on a few active and passive controls employed to modify the base drag. It is noteworthy that a reduction in base drag is of benefit in combustion mechanisms while an in-crease in base drag is preferred for net drag reduction of bodies moving through air. Suppression of flow oscillations that accompany the control of base drag also merits attention. A few suggestions by way of future work are also discussed.