Nanofluid as an Alternative Coolant in Machining: A Review

Authors

  • Kumaran Kadirgama Faculty of Mechanical & Automotive Engineering Technology, Universiti Malaysia Pahang, Malaysia

Keywords:

Nanofluid, machining, wear, tool life

Abstract

This review paper is concerned about the important of nanofluid in machining. It is discussed in several parts such as cutting force, surface roughness, tool life and tool wear. Various type of nanofluid is discussed in this paper with an effect on the surface roughness, force, tool life, and wear. Nanofluid plays a significant role in the increment of tool life and reducing tool wear. Nanofluid creates an artificial layer on top of the workpiece, and this reduces wear at the cutting tool. It seems that nanofluid can be the next alternative coolant in machining.

Downloads

Download data is not yet available.

Downloads

Published

2024-03-28

How to Cite

Kumaran Kadirgama. (2024). Nanofluid as an Alternative Coolant in Machining: A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69(1), 163–173. Retrieved from https://semarakilmu.com.my/journals/index.php/fluid_mechanics_thermal_sciences/article/view/6157

Issue

Section

Articles

Most read articles by the same author(s)