Investigation on the Blade Number of Pico-scale Crossflow Turbine for Low Head by Numerical Method

Authors

  • Dendy Adanta Department of Mechanical Engineering, Faculty of Engineering, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia
  • Ilham Saputra Department of Mechanical Engineering, Faculty of Engineering, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia
  • Dewi Puspita Sari Study Program of Mechanical Engineering Education, Faculty of Teacher Training and Education, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia
  • Imam Syofii Study Program of Mechanical Engineering Education, Faculty of Teacher Training and Education, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia
  • Ismail Thamrin Department of Mechanical Engineering, Faculty of Engineering, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia
  • Irsyadi Yani Department of Mechanical Engineering, Faculty of Engineering, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia
  • Anthony Costa Department of Civil Engineering, Faculty of Engineering, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia
  • Akbar Teguh Prakoso Department of Mechanical Engineering, Faculty of Engineering, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia
  • Ahmad Fudholi Research Center for Energy Conversion and Conservation, National Research and Innovation Agency (BRIN), Serpong, 15314, Indonesia
  • Wadirin Study Program of Mechanical Engineering Education, Faculty of Teacher Training and Education, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia

DOI:

https://doi.org/10.37934/arfmts.118.2.112

Keywords:

Crossflow turbine, pico hydro, computational fluid dynamic, energy conversion, low head

Abstract

Pico-scale crossflow turbines (CFT) can be an alternative solution to meet electrical energy needs, especially in remote rural areas. CFT is recommended because of its suitability in low head (< 5 m) conditions and fluctuating discharge conditions. One of the parameters that influences the performance of a CFT is the number of blades of the runner. CFT was discovered in 1903 and is still developing; however, the study of the physical phenomena of flow due to the blade number on the energy conversion process has yet to be comprehensively depicted. Therefore, this study aims to analyze the effect of the blade's number of runners on CFT performance using the computational fluid dynamics (CFD) method. The CFD method can visualize the flow field more detail than analytical and experimental. The CFD method is run with a moving mesh feature (transient) and pressure-based solver with a head condition of 3 m. The blades number studied were 16, 18, 22, 24, 26, and 30. Based on the results, the relationship of the CFT efficiency to blade number is described using a second-order multiple regression polynomial, and runner rotation is parabolic. Based on the performance curve, the CFT with 26 blades has the highest performance for low-head conditions.

Downloads

Download data is not yet available.

Author Biographies

Dendy Adanta, Department of Mechanical Engineering, Faculty of Engineering, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia

dendyadanta@ymail.com

Ilham Saputra, Department of Mechanical Engineering, Faculty of Engineering, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia

ilhamsaputraa9@gmail.com

Dewi Puspita Sari, Study Program of Mechanical Engineering Education, Faculty of Teacher Training and Education, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia

dewipuspita@fkip.unsri.ac.id

Imam Syofii, Study Program of Mechanical Engineering Education, Faculty of Teacher Training and Education, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia

imamsyofii@unsri.ac.id

Ismail Thamrin, Department of Mechanical Engineering, Faculty of Engineering, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia

ismailthamrin@ft.unsri.ac.id

Irsyadi Yani, Department of Mechanical Engineering, Faculty of Engineering, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia

yani_irs@ft.unsri.ac.id

Anthony Costa, Department of Civil Engineering, Faculty of Engineering, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia

anthonycosta@ft.unsri.ac.id

Akbar Teguh Prakoso, Department of Mechanical Engineering, Faculty of Engineering, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia

akbar@unsri.ac.id

Ahmad Fudholi, Research Center for Energy Conversion and Conservation, National Research and Innovation Agency (BRIN), Serpong, 15314, Indonesia

a.fudholi@gmail.com

Wadirin, Study Program of Mechanical Engineering Education, Faculty of Teacher Training and Education, Universitas Sriwijaya, Ogan Ilir – 30662, South Sumatera, Indonesia

wadirin@fkip.unsri.ac.id

Downloads

Published

2024-06-30

How to Cite

Dendy Adanta, Ilham Saputra, Dewi Puspita Sari, Imam Syofii, Ismail Thamrin, Irsyadi Yani, Anthony Costa, Akbar Teguh Prakoso, Ahmad Fudholi, & Wadirin. (2024). Investigation on the Blade Number of Pico-scale Crossflow Turbine for Low Head by Numerical Method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 118(2), 1–12. https://doi.org/10.37934/arfmts.118.2.112

Issue

Vol. 118 No. 2: June (2024)

Section

Articles
Crossref
Scopus
Google Scholar
Europe PMC

Most read articles by the same author(s)

<< < 1 2