Q-Switched Erbium-Doped Fiber Laser Generation using Titanium Aluminum Carbonitride Ti3Al(C0.5N0.5)2 Saturable Absorber

Authors

  • Shairazi Akmal Anuar Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, 76100 Hang Tuah Jaya, Melaka, Malaysia
  • Mohd Fauzi Ab Rahman Fakulti Teknologi Kejuruteraan Elektrik dan Elektronik, Universiti Teknikal Malaysia Melaka, 76100 Melaka, Malaysia
  • Amal Muaz Nasir Fakulti Teknologi Kejuruteraan Elektrik dan Elektronik, Universiti Teknikal Malaysia Melaka, 76100 Melaka, Malaysia
  • Anas Abdul Latiff Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, 76100 Hang Tuah Jaya, Melaka, Malaysia
  • Afiq Arif Aminuddin Jafry School of Pre-University Studies, Taylor's College, Lakeside Campus, No. 1, Jalan Taylor's, 47500 Subang Jaya, Selangor, Malaysia

DOI:

https://doi.org/10.37934/araset.31.1.144155

Keywords:

Fiber laser, Q-Switching, passive technique, pulsed laser

Abstract

A new MAX-phase-based saturable absorber (SA) known as Titanium Aluminium Carbonitride, Ti3Al(C0.5N0.5)2 PVA composite film is successfully developed to demonstrate a reliable Q-switched laser in the 1.55-micron region. The Ti3Al(C0.5N0.5)2 composite film with a size of about 1 mm2 is sandwiched between two fibre ferules and integrated into an erbium-doped fibre laser (EDFL) ring cavity. The film SA has a linear absorption of about 5.7 dB at the pulsing region, and a modulation depth of 21%. The Q-switched laser, which is centred at 1561 nm, stably appears at a pump power range of 25 mW-55 mW. The Q-switched laser has the highest repetition rate of 46.3 kHz and the narrowest pulse width of 6.6 µs. The maximum calculated peak power is 1.6 mW, while the highest pulse energy is 10.54 nJ. This demonstration suggests that the Ti3Al(C0.5N0.5)2 can be an alternative SA that may have a good prospect in optical-related applications.

Author Biographies

Shairazi Akmal Anuar, Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, 76100 Hang Tuah Jaya, Melaka, Malaysia

m022120008@student.utem.edu.my

Mohd Fauzi Ab Rahman, Fakulti Teknologi Kejuruteraan Elektrik dan Elektronik, Universiti Teknikal Malaysia Melaka, 76100 Melaka, Malaysia

mfauziar@utem.edu.my

Amal Muaz Nasir, Fakulti Teknologi Kejuruteraan Elektrik dan Elektronik, Universiti Teknikal Malaysia Melaka, 76100 Melaka, Malaysia

m022120016@student.utem.edu.my

Anas Abdul Latiff, Faculty of Electronic and Computer Engineering, Universiti Teknikal Malaysia Melaka, 76100 Hang Tuah Jaya, Melaka, Malaysia

anasabdullatiff@utem.edu.my

Afiq Arif Aminuddin Jafry, School of Pre-University Studies, Taylor's College, Lakeside Campus, No. 1, Jalan Taylor's, 47500 Subang Jaya, Selangor, Malaysia

afiq.aminuddinj@taylors.edu.my

Downloads

Published

2023-06-19

How to Cite

Shairazi Akmal Anuar, Mohd Fauzi Ab Rahman, Amal Muaz Nasir, Anas Abdul Latiff, & Afiq Arif Aminuddin Jafry. (2023). Q-Switched Erbium-Doped Fiber Laser Generation using Titanium Aluminum Carbonitride Ti3Al(C0.5N0.5)2 Saturable Absorber. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31(1), 144–155. https://doi.org/10.37934/araset.31.1.144155

Issue

Vol. 31 No. 1: June (2023)

Section

Articles