CFD Analysis of Gas-Dynamic and Heat Transfer Processes in a Propulsion System using Polymer Fuel
DOI:
https://doi.org/10.37934/arnht.21.1.1425Keywords:
new type of rocket engine, propulsion using polymer fuel, CFD modeling of gas dynamic, central bodyAbstract
In the presented work, a computer model of thermodynamic and gas-dynamic processes in a rocket engine of a new type, which uses solid polymers as fuel is considered. The design feature is the presence of a central body - a gasification chamber, where solid polymer fuel is decomposed into volatiles. To conduct the research, a preliminary thermodynamic analysis of the combustion of gasification products was carried out. Based on the results of the thermodynamic analysis using the mathematical model of the turbulent flow of viscous compressible gas, the processes of gas dynamics and heat transfer in the chamber and nozzle of the rocket engine were simulated. Analyses are made for the geometry of a real experimental sample of a polymer-fueled rocket engine developed at Oles Honchar Dnipro National University (Ukraine), which has passed the first successful tests. As a result of CFD simulation, dynamic and thermal fields in the combustion chamber and engine nozzle were obtained, and ways of further improvement of the design were determined.
Downloads
References
Izham Izzat Ismail, Nur Husnina Aufa Rozainuddin, Norhuda Hidayah Nordin, and Muhammad Hanafi Azami. Modelling of Hybrid Rocket Flow-Fields with Computational Fluid Dynamics." CFD Letters, no. 14(3), (2022): 53–67. https://doi.org/10.37934/cfdl.14.3.5367
Izham Izzat Ismail, Nordin, N. H., Muhammad Hanafi Azami, and Nur Azam Abdullah. "Metals and Alloys Additives as Enhancer for Rocket Propulsion: A Review." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, no. 90(1), (2022): 1–9. https://doi.org/10.37934/arfmts.90.1.19
Bondarenko Sergii, Dreus, Andrii, and Lysenko, Katerina. "The investigation of thermal and gas dynamic processes in the combustion chamber of the rocket engine using slurry fuel." Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 232, no. 10 (2018): 1903-1910. https://doi.org/10.1177/0954410015606939
Benzenine, F., Seladji, C.., Darfilal, D., Bendermel, O. “Optimization of 10 N Monopropellant High Test Peroxide Thruster for Space Applications.” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 100(2), (2022), 60–77. https://doi.org/10.37934/arfmts.100.2.6077
Petrenko, O., S. Tolok, V. Maslov, S. Kulagin, V. Serbin, O. Alekseenko, and D. Shcherbak. "Electric propulsion system SPS-25 with Hall Thruster." In Proceedings of the International Astronautical Congress, IAC, pp. IAC-19_C4_4_4_x50659. 2019.
Vasyliv, S.S., Pryadko N.S., Bondarenko S.G. Combustion and detonation of paste fuel of rocket engine Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2023, (5): 072 – 076. https://doi.org/10.33271/nvngu/2023-5/072
Shan X., Li Y., Chen X., Wu Y., He Y., Li W. Investigations on Internal Ballistic Characteristics of Pasty Propellant Rocket Engine (2021) International Journal of Aerospace Engineering, 2021, art. no. 9952209, https://doi.org/10.1155/2021/9952209
Sachin Kumar, Achyut K. Panda, and R.K. Singh. A review on tertiary recycling of high-density polyethylene to fuel." Resources, Conservation and Recycling 55, no. 11, (2011): 893-910, https://doi.org/10.1016/j.resconrec.2011.05.005
Kundan Kumar Jha, and T.T.M. Kannan. "Recycling of plastic waste into fuel by pyrolysis - a review." Materials Today: Proceedings, no. 37, Part 2, (2021): 3718-3720, https://doi.org/10.1016/j.matpr.2020.10.181
S.M. Al-Salem, Sriraam R. Chandrasekaran, Animesh Dutta, Brajendra K. Sharma. "Study of the fuel properties of extracted oils obtained from low and linear low density polyethylene pyrolysis." Fuel, no. 304, (2021): 121396 https://doi.org/10.1016/j.fuel.2021.121396
Ito, S., Kamps, L., and Nagata, H. "Fuel Regression Characteristics in Hybrid Rockets Using Nitrous Oxide/High-Density Polyethylene." Journal of propulsion and power, 37, no. 2, (2021): 342-348. https://doi.org/10.2514/1.B37875
Quero Granado, E., Hijlkema, J., Lestrade, J. Y., and Anthoine, J. "Development and Validation of a 1.5-D Combustion Chamber Model for a Hybrid Rocket Engine Applied to a Cylindrical HDPE Chamber". In AIAA Propulsion and Energy 2021 Forum, (2021): 3495. https://doi.org/10.2514/6.2021-3495
Yun, Y., Huh, J., Kim, Y., Heo, S., Kim, H., and Kwon, S. "Scale-Up Validation of Hydrogen Peroxide/High-Density Polyethylene Hybrid Rocket with Multiport Solid Fuel." Journal of Spacecraft and Rockets, 58, no. 2, (2021): 552-565. https://doi.org/10.2514/1.A34707
Kositsyna, O.S., Dron, M.M., Yemets, V.V. "The environmental impact assessment of emission from space launches: The promising propellants components selection." Journal of Chemistry and Technologies 28, no. 2, (2020): 186–193. https://doi.org/10.15421/082020
Yemets, V., Harkness, P., Dron, M., Pashkov, A., Worrall, K., and Middleton, M. "Autophage engines: Toward a throttleable solid motor." Journal of Spacecraft and Rockets 55, no. 4, (2018): 984-992. https://doi.org/10.2514/1.A34153
Bzdyk, K., Harkness, P., Shaw P., and Tufft, J. "Investigation of the Operating Parameters and Performance of an Autophage, Hybrid Rocket Propulsion System." In AIAA SCITECH 2024 Forum, 8-12 January 2024 Orlando, FL. https://doi.org/10.2514/6.2024-1604
Yemets, V., Sanin, F., Dzhur, Ye., Masliany, M., Kostritsyn, O., and Minteev. G. "Single-stage small satellite launcher with combustible tank of polyethylene.", Acta Astronautica, no 64(1), (2009): 28-32. https://doi.org/10.1016/j.actaastro.2008.06.015
Dreus, A., Yemets, V., Dron, M., Yemets, M., and Golubek, A. "A simulation of the thermal environment of a plastic body of a new type of launch vehicle at the atmospheric phase of the trajectory", Aircraft Engineering and Aerospace Technology 94, no. 4, (2022): 505-514. https://doi.org/10.1108/AEAT-04-2021-0100
Serhii Alekseyenko, Dreus, A., Mykola Dron, and Olexandr Brazaluk. "Numerical Study of Aerodynamic Characteristics of a Pointed Plate of Variable Elongation in Subsonic and Supersonic Gas Flow. " Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96, no.2, (2022): 88–97. https://doi.org/10.37934/arfmts.96.2.889
Khan, S. A. ., Aabid, A. ., Mehaboobali Ghasi, F. A. ., Al-Robaian, A. A. ., & Alsagri, A. S. "Analysis of Area Ratio In a CD Nozzle with Suddenly Expanded Duct using CFD Method." CFD Letters, 11, no. 5, (2021): 61–71. https://akademiabaru.com/submit/index.php/cfdl/article/view/3163
Khare, S., Saha, U.K. "Rocket nozzles: 75 years of research and development." Sādhanā, 46, 76, (2021). https://doi.org/10.1007/s12046-021-01584-6
Walid Hamaidia W., Zebbiche T. , Sellam M., and Allali A. "Performance improvement of supersonic nozzles design using a high-temperature model." Proc ImechE: Part G: J Aerospace Engineering, 232, no.3, (2019): 1–16. DOI: https://doi.org/10.1177/0954410019831862
Hagemann, G., Immich, H., and Terhardt, M. "Flow phenomena in advanced rocket nozzles-the plug nozzle." In 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, p. 3522, 1998. https://doi.org/10.2514/6.1998-3522
Yang M., Xiao S., Kang C., Wang Y. "Effect of Geometrical Parameters on Submerged Cavitation Jet Discharged from Profiled Central-body Nozzle." Chinese journal of mechanical engineering, 26, no. 3, (2013):·476–482. https://doi.org/10.3901/CJME.2013.03.476G
Ferlauto M., Ferrero A., Marsilio R. "Fluidic thrust vectoring for annular aerospike nozzle." In AIAA Propuls. Energ. Forum, р.3777, 2020. https://doi.org/10.2514/6.2020-377
Wang, C. H., Liu, Y., and Qin, L. Z. "Aerospike nozzle contour design and its performance validation." Acta Astronautica, no 64(11-12), (2009): 1264-1275. https://doi.org/10.1016/j.actaastro.2008.01.045
Williams, F. A. Combustion theory. CRC Press. (2018).
Downloads
Published
How to Cite
Issue
Section
