Thermal and Concentration Impacts on Tannin and Physical Properties Changes during Alkaline Soaking of Sorghum Grain

Authors

  • Zuhriyan Ash Shiddieqy Bahlawan Department Chemical Engineering, Faculty of Engineering, Universitas Negeri Semarang, Gunungpati, Semarang 50299, Indonesia
  • Andri Cahyo Kumoro Department of Chemical Engineering, Faculty of Engineering, Diponegoro University, Jl. Prof. Soedarto S.H., Tembalang, Semarang 50239, Indonesia
  • Satriyo Krido Wahono Research Center for Food Technology and Processing - National Research and Innovation Agency Republic of Indonesia (PRTPP - BRIN), Playen, Gunungkidul, Yogyakarta 55861, Indonesia
  • Megawati Department Chemical Engineering, Faculty of Engineering, Universitas Negeri Semarang, Gunungpati, Semarang 50299, Indonesia
  • Tan Chin Ping Department of Food Technology, Faculty of Food Science and Technology, Universiti Putra Malaysia, Serdang, Malaysia

DOI:

https://doi.org/10.37934/arfmts.120.2.115124

Keywords:

Food processing, sorghum, soaking, thermal, tannin

Abstract

Tannin is one of the phenolic components present in food ingredients, especially grains and nuts. The tannin content in sorghum grain up to 4.8% depending on the variety. In low concentrations, tannins have benefits if consumed by humans. Meanwhile, at high amounts, tannin acts as an anti-nutritional substance that can inhibit the absorption of protein in digestion. In this study, the process of degrading tannin levels in this study used the soaking method using potassium hydroxide and calcium hydroxide solutions with concentrations (0.05-0.15%) with soaking temperatures of 30, 40, and 50oC. Soaking was carried out for 8 hours with sampling every 1 hour. The use of Calcium hydroxide alkaline solution of 0.15% obtained in the highest dissolved tannin solution in sorghum grain soaking process. The results of soaking process also obtained data on the Water Adsorption Index, Water Solubility Index, and Swelling Power. From this research it is expected to obtain low concentrations tannin of sorghum grain as a quality food ingredient.

Downloads

Download data is not yet available.

Author Biographies

Zuhriyan Ash Shiddieqy Bahlawan, Department Chemical Engineering, Faculty of Engineering, Universitas Negeri Semarang, Gunungpati, Semarang 50299, Indonesia

zuhriyanb@mail.unnes.ac.id

Andri Cahyo Kumoro, Department of Chemical Engineering, Faculty of Engineering, Diponegoro University, Jl. Prof. Soedarto S.H., Tembalang, Semarang 50239, Indonesia

andrewkomoro@che.undip.ac.id

Satriyo Krido Wahono, Research Center for Food Technology and Processing - National Research and Innovation Agency Republic of Indonesia (PRTPP - BRIN), Playen, Gunungkidul, Yogyakarta 55861, Indonesia

satr005@brin.go.id

Megawati, Department Chemical Engineering, Faculty of Engineering, Universitas Negeri Semarang, Gunungpati, Semarang 50299, Indonesia

megawati@mail.unnes.ac.id

Tan Chin Ping, Department of Food Technology, Faculty of Food Science and Technology, Universiti Putra Malaysia, Serdang, Malaysia

tancp@upm.edu.my

Downloads

Published

2024-08-30

How to Cite

Bahlawan, Z. A. S. ., Kumoro, A. C. ., Wahono, S. K. ., Megawati, M., & Tan, C. P. (2024). Thermal and Concentration Impacts on Tannin and Physical Properties Changes during Alkaline Soaking of Sorghum Grain. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 120(2), 115–124. https://doi.org/10.37934/arfmts.120.2.115124

Issue

Section

Articles