Experimental Investigation on Filtration and Cooling Effect of Kitchen Hood Ventilation System from Water-Mist Recirculation Spray: Water-Mist Spray Cycle

Authors

  • Nor Adrian Nor Salim Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • Norzelawati Asmuin Flow Analysis, Simulation, And Turbulence Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • Azian Hariri Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • M. Farid Sies Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • Hanis Zakaria Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • Ahmad Fu’ad Idris Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • Azizi Afandi Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • M. Asrul Bosiran Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • Ishkrizat Taib Flow Analysis, Simulation, And Turbulence Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • Ahmad Mubarak Tajul Arifin Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia

DOI:

https://doi.org/10.37934/arfmts.90.1.6479

Keywords:

Exhaust hood, Kitchen ventilation system, Water-mist spray, Recirculation system, Indoor thermal environment, Indoor air quality, wastewater

Abstract

A Water-mist spray system in several heavy-duty kitchen hood canopies is installed to efficiently control the high heat loads and grease emissions produced from the cooking process and for safety purposes. The main purpose of this study is to reduce water consumption by introducing the water-mist recirculation system to replace the current method water-mist system since it is working as water loss. A standard ASTM 2519 and UL 1046 full-scaled experiment is developed in the laboratory. An existing Halton Europe/Asian water-mist operating system is adopted in this study. Twelve (12) cycles (at 24 hours of water-mist activation) have been studied to determine the maximum water-mist activation cycle. The data are collected at two (2) hours water-mist activation at every water-mist recirculation cycle. The water-mist spray fluids viscosity is 0.7 cP from fresh water until the 4th cycle (8 hours water-mist spray) and increase 14.29% (0.8 cP) at the 5th cycle to the 12th cycle. On average, the difference in gas emissions percentage for CO concentration between fresh water until the 4th cycle is 10.81 – 18.92% while the CO2 concentration is 12.33 – 18.22%. On average, the difference in cooling effects percentage for ducting temperature between fresh water until the 4th cycle is 5.55% while the hood temperature is 2.33%. From the study, the water-mist recirculation system could save up to 611,667 litres per year and 466,798.5 litres per year water for all U.S, European, and Asian kitchen hood designs per hood length. By adopting the new water-mist recirculation system to the current water-mist kitchen hood, the water operational cost for water successfully reduced to RM 4,889.63 per year and RM 6,977.86 per year for U.S design and European or Asian design per hood length respectively. The water-mist recirculation system has great potential to improve the current water-mist system for the commercial kitchen hood.

Downloads

Download data is not yet available.

Author Biographies

Nor Adrian Nor Salim, Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia

adrian@uthm.edu.my

Norzelawati Asmuin, Flow Analysis, Simulation, And Turbulence Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia

norzela@uthm.edu.my

Azian Hariri, Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia

azian@uthm.edu.my

M. Farid Sies, Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia

farids@uthm.edu.my

Hanis Zakaria, Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia

hanisz@uthm.edu.my

Ahmad Fu’ad Idris, Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia

afuad@uthm.edu.my

Azizi Afandi, Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia

mdazizi@uthm.edu.my

M. Asrul Bosiran, Industrial and Indoor Environment Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia

asrul@uthm.edu.my

Ishkrizat Taib, Flow Analysis, Simulation, And Turbulence Research Group, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia

iszat@uthm.edu.my

Ahmad Mubarak Tajul Arifin, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia

mubarak@uthm.edu.my

Downloads

Published

2022-01-01

How to Cite

Nor Salim, N. A. ., Norzelawati Asmuin, Azian Hariri, M. Farid Sies, Hanis Zakaria, Ahmad Fu’ad Idris, Azizi Afandi, M. Asrul Bosiran, Ishkrizat Taib, & Ahmad Mubarak Tajul Arifin. (2022). Experimental Investigation on Filtration and Cooling Effect of Kitchen Hood Ventilation System from Water-Mist Recirculation Spray: Water-Mist Spray Cycle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90(1), 64–79. https://doi.org/10.37934/arfmts.90.1.6479

Issue

Section

Articles

Most read articles by the same author(s)

<< < 1 2