Bond Graph Modeling and Control of A Single-Zone Building in a Semi-Arid Region for Thermal Comfort

Authors

  • Farida Benslimane Energy Laboratory in Arid Zones (ENERGARID) University Tahri Mohamed of Bechar, Algeria
  • Fatah Bounaama Energy Laboratory in Arid Zones (ENERGARID) University Tahri Mohamed of Bechar, Algeria
  • Belkacem Draoui Faculty of Technology UTM Bechar, Algeria

Keywords:

Building, Energetic efficiency, Thermal Comfort, Bond Graph, Modelization, experimental, Measurement, optimization, Simulation, PID

Abstract

To analyze the thermal behavior of our studied local; a model of the bond graph of a single-zone construction taking into account influences of the outside/inside climate has been developed and validated. Using a thermoelectric analogy, the thermal model is thus represented by a second-order RC network. Data from experimental input-output measurement sequences collected at the laboratory ENERGARID of the University of Bechar in southwest Algeria are used to identify and validate model parameters. This allowed us to obtain a good behavioral model of our site.For the well-being of occupants and with greater energy efficiency, the internal climate management was dedicated to the use of a PID controller. Its parameters are optimized by the Newton Raphson algorithm so we have achieved satisfactory results illustrated by simulation.

Downloads

Download data is not yet available.

Downloads

Published

2024-03-28

How to Cite

Farida Benslimane, Fatah Bounaama, & Belkacem Draoui. (2024). Bond Graph Modeling and Control of A Single-Zone Building in a Semi-Arid Region for Thermal Comfort. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61(1), 94–105. Retrieved from https://semarakilmu.com.my/journals/index.php/fluid_mechanics_thermal_sciences/article/view/3492

Issue

Section

Articles