Numerical Investigation of Mathematical Non-Dimensional  Constant Representing Smoothness in the Nusselt Profile

Authors

Emaad Ansari School of Aerospace Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang, Malaysia
Mohammad Nishat Akhtar School of Aerospace Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang, Malaysia
Elmi Abu Bakar School of Aerospace Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang, Malaysia
Umair Siddique Department of Mechanical Engineering, University of Pretoria, 0002, Pretoria, South Africa
Sher Afghan Khan Department of Mechanical Engineering, International Islamic University Malaysia, 53100, Kuala Lumpur, Malaysia

Nusselt profile, Reynolds number, nozzle-target spacing

Cooling of devices using air-jet and other fluid impingement has acquired pace in the

manufacturing and electronic device industries. The cooling of the surface using liquid

jets is studied using the Nusselt distribution profile. The pattern of the Nusselt profile

becomes non-uniform when some parameters are wrongly selected. This may lead to

heating of some locations instead of cooling of the surface. Thus research for keeping

the Nusselt profile uniform is a primary task. The Nusselt profile depends mainly on

the Reynolds number (Re) and nozzle-target spacing (Z/d). Therefore, the current study

numerically evaluates the value of constant, which is a ratio of Reynolds number and

nozzle-target spacing (C = Re/ (Z/d)) up to which the Nusselt profile remains uniform.

The value of constant C is found to be 7400. Also, the present work uses a

computational model for study, which is validated using grid independence test and

turbulence modeling.

Download data is not yet available.