A Simulation Study of Hybrid Solar Drying Chamber for Agriculture Product
DOI:
https://doi.org/10.37934/cfdl.16.9.8193Keywords:
Drying chamber, Computational Fluid Dynamics (CFD) simulation, uniformity distributionAbstract
Hybrid solar drying chamber is an application that is widely used today for agriculture products because it can promise the hygiene of the product. However, drying chambers nowadays still lack uniformity in drying products within a drying chamber, leading to food wastage and compromised product quality. This study aims to design an innovative hybrid solar drying chamber system and investigate the uniformity of temperature and velocity within the chamber using Computational Fluid Dynamics (CFD). The methodology involves validating the simulation results by comparing them with existing journal data, with a validation error of less than 5%. A new design is proposed after the validation process, considering factors such as tray arrangement and air inlet size. The results show that a tray arrangement with 0.20 m spacing between each tray provides better uniformity in temperature and air velocity distribution compared to other arrangements. Additionally, an inlet size of 0.05 m2 demonstrates the most suitable temperature distribution for drying purposes, falling within the ideal range of 318 K to 343 K. The study showed that the performance of the drying chamber under different operating conditions has consistent temperature distribution and is suitable for uniform drying. Overall, the proposed hybrid solar drying chamber system offers improved temperature control and uniformity for effective drying process.
Downloads
References
Sachit, F. A., Noreffendy Tamaldin, M. A. M. Rosli, S. Misha, and A. L. Abdullah. "Current progress on flat-plate water collector design in photovoltaic thermal (PV/T) systems: A Review." Journal of Advanced Research in Dynamical and Control Systems 10, no. 4 (2018): 680-89.
Rosli, Mohd Afzanizam Mohd, Danial Shafiq Mohd Zaki, Fatiha Abdul Rahman, Suhaila Sepeai, Nurfaizey Abdul Hamid, and Muhammad Zaid Nawam. "F-chart method for design domestic hot water heating system in Ayer Keroh Melaka." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 56, no. 1 (2019): 59-67.
Rosli, Mohd Afzanizam Mohd, Sit Jing Hiew, Nur Izzati Mohd Azhar, Maidi Saputra, and Sulaiman Ali. "A Simulation Study of Drying Chamber for Marine Product." International Journal of Integrated Engineering 13, no. 6 (2021): 62-69. https://doi.org/10.30880/ijie.2021.13.06.005
Singh, Rupanshu, Pranav Salhan, and Anil Kumar. "CFD modelling and simulation of an indirect forced convection solar dryer." In IOP Conference Series: Earth and Environmental Science, vol. 795, no. 1, p. 012008. IOP Publishing, 2021. https://doi.org/10.1088/1755-1315/795/1/012008
Ghaderian, J., CS Nor Azwadi, and H. A. Mohammed. "Modelling of energy and exergy analysis for a double-pass solar air heater system." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 16, no. 1 (2015): 15-32.
Yao, Yi, Yoong Xin Pang, Sivakumar Manickam, Edward Lester, Tao Wu, and Cheng Heng Pang. "A review study on recent advances in solar drying: Mechanisms, challenges and perspectives." Solar Energy Materials and Solar Cells 248 (2022): 111979. https://doi.org/10.1016/j.solmat.2022.111979
Zoukit, Ahmed, Hicham El Ferouali, Issam Salhi, Said Doubabi, and Naji Abdenouri. "Simulation, design and experimental performance evaluation of an innovative hybrid solar-gas dryer." Energy 189 (2019): 116279. https://doi.org/10.1016/j.energy.2019.116279
Sanghi, Achint, RP Kingsly Ambrose, and Dirk Maier. "CFD simulation of corn drying in a natural convection solar dryer." Drying Technology 36, no. 7 (2018): 859-870. https://doi.org/10.1080/07373937.2017.1359622
Ram Chourasiya, and Nitin Garg. “Experimental and Simulation Study on Naturalconvection Solar Food Dryer.” International Journal of Research, Science, Technology & Management 14, no.3 (2019.).
Ambesange, A. I., and S. K. Kusekar. "Analysis of flow through solar dryer duct using CFD." International Journal of Engineering Development and Research 5, no. 1 (2017). https://doi.org/10.1016/j.ast.2012.02.006
Mathioulakis, E., V. T. Karathanos, and Vr G. Belessiotis. "Simulation of air movement in a dryer by computational fluid dynamics: application for the drying of fruits." Journal of food engineering 36, no. 2 (1998): 183-200. https://doi.org/10.1016/S0260-8774(98)00026-0
Akharume, Felix, Samuel Adeyemi, and Surajudeen Obayopo. "A study on the numerical simulations and experimental validation of a hybrid solar dryer for cocoa." In 2019 ASABE Annual International Meeting, p. 1. American Society of Agricultural and Biological Engineers, 2019. https://doi.org/10.13031/aim.201900890
Guangbin, Liu, Xu Kaixuan, Yang Qichao, Zhao Yuangyang, and Li Liansheng. "Flow field and drying process analysis of double-layer drying chamber in heat pump dryer." Applied Thermal Engineering 209 (2022): 118261. https://doi.org/10.1016/j.applthermaleng.2022.118261
Amanlou, Y., and A. Zomorodian. "Applying CFD for designing a new fruit cabinet dryer." Journal of food engineering 101, no. 1 (2010): 8-15. https://doi.org/10.1016/j.jfoodeng.2010.06.001
Moghimi, P., H. Rahimzadeh, and A. Ahmadpour. "Experimental and numerical optimal design of a household solar fruit and vegetable dryer." Solar Energy 214 (2021): 575-587. https://doi.org/10.1016/j.solener.2020.12.023
Naing, Than Tun, and Cho Thandar Soe. "Comparative analysis of the performance of cabinet solar dryer and open sun drying for Banana slices." In IOP Conference Series: Materials Science and Engineering, vol. 1127, no. 1, p. 012015. IOP Publishing, 2021. https://doi.org/10.1088/1757-899X/1127/1/012015
Seremet, Liliana, Elisabeta Botez, Oana-Viorela Nistor, Doina Georgeta Andronoiu, and Gabriel-Danut Mocanu. "Effect of different drying methods on moisture ratio and rehydration of pumpkin slices." Food chemistry 195 (2016): 104-109. https://doi.org/10.1016/j.foodchem.2015.03.125
Demissie, Petros, Mesele Hayelom, Amanuel Kassaye, Asfafaw Hailesilassie, Mekonnen Gebrehiwot, and Maarten Vanierschot. "Design, development and CFD modeling of indirect solar food dryer." Energy Procedia 158 (2019): 1128-1134. https://doi.org/10.1016/j.egypro.2019.01.278
Rosli, Mohd Afzanizam Mohd, Yew Wai Loon, Muhammad Zaid Nawam, Suhaimi Misha, Aiman Roslizar, Faridah Hussain, Nurfaizey Abdul Hamid, Zainal Arifin, and Safarudin Gazali Herawan. "Validation Study of Photovoltaic Thermal Nanofluid Based Coolant Using Computational Fluid Dynamics Approach." CFD Letters 13, no. 3 (2021): 58-71. https://doi.org/10.37934/cfdl.13.3.5871
Swarup R. Joshi, and Dr. Suresh M. Sawant. “NUMERICAL ANALYSIS OF SOLAR DRYING CHAMBER for AGRICULTURAL PRODUCTS USING CFD.” International Research Journal of Engineering and Technology 07, no. 10 (2020): 869-871.
Sileshi, Senay Teshome, Abdulkadir Aman Hassen, and Kamil Dino Adem. "Drying kinetics of dried injera (dirkosh) using a mixed-mode solar dryer." Cogent Engineering 8, no. 1 (2021): 1956870. https://doi.org/10.1080/23311916.2021.1956870
Salhi, Mourad, Dounia Chaatouf, Benyounes Raillani, Samir Amraqui, and Ahmed Mezrhab. "Investigating the effect of food trays porosity on the drying process." Innovative Food Science & Emerging Technologies 76 (2022): 102939. https://doi.org/10.1016/j.ifset.2022.102939
Pardhi, Chandrakumar B., and Jiwanlal L. Bhagoria. "Development and performance evaluation of mixed-mode solar dryer with forced convection." International journal of energy and environmental engineering 4 (2013): 1-8. https://doi.org/10.1186/2251-6832-4-23
Mat, Sohif, Suhaimi Misha, Mohd Hafidz Ruslan, Elias Salleh, and Kamaruzzaman Sopian. "A Study of Drying Uniformity in a New Design of Tray Dryer." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 52, no. 2 (2018): 129-138.
Rahou, M., M. Y. Othman, S. Mat, and A. Ibrahim. "Performance study of a photovoltaic thermal system with an oscillatory flow design." Journal of solar energy engineering 136, no. 1 (2014): 011012. https://doi.org/10.1115/1.4024743
Srinivasan, G., D. K. Rabha, and P. J. S. E. Muthukumar. "A review on solar dryers integrated with thermal energy storage units for drying agricultural and food products." Solar energy 229 (2021): 22-38. https://doi.org/10.1016/j.solener.2021.07.075
Downloads
Published
How to Cite
Issue
Section
