Numerical Analysis of Hybrid Nanofluid Flow Over a Nonlinear Stretching Sheet with Viscous Dissipation, Joule Heating Effects

Sulochana C; Geeta C Shivapuji

doi:10.37934/cfdl.14.10.4255

Authors

Sulochana C Department of Mathematics, Gulbarga University, Kalaburagi, Karnataka, India
Geeta C Shivapuji Department of Mathematics, Government First Grade College, Raibag, Karnataka, India

DOI:

https://doi.org/10.37934/cfdl.14.10.4255

Keywords:

MHD flow, Hybrid nanofluid, Stretching sheet, Shooting technique

Abstract

The main objective of this article is to explore magnetohydrodynamic hybrid nanofluid flow past a stretching sheet. Mathematical model is developed by revisiting the work done by previous study and extended the same model for hybrid nanofluid flow scenario with viscous dissipation, joule heating and thermal radiation effects. Choosing appropriate similarity variables governing equations are transformed into system of ordinary differential equation and thereby solved by using shooting mechanism. Impact of various physical parameters on momentum, temperature and concentration profiles are shown through graphs. Important engineering quantities like skin friction coefficient, Nusselt number etc. are computed and discussed. In order to verify the code, the computed results are compared with existing literature and acceptable convergence notified in obtained results. Comparative analysis for mono particle nanofluid and hybrid nanofluid is explained for all flow parameters.

Downloads

Download data is not yet available.

Author Biographies

Sulochana C, Department of Mathematics, Gulbarga University, Kalaburagi, Karnataka, India

math.sulochana@gmail.com

Geeta C Shivapuji, Department of Mathematics, Government First Grade College, Raibag, Karnataka, India

geet_math@rediffmail.com

References

Mabood, Fazle, W. A. Khan, and AI Md Ismail. "MHD boundary layer flow and heat transfer of nanofluids over a nonlinear stretching sheet: a numerical study." Journal of Magnetism and Magnetic Materials 374 (2015): 569-576. https://doi.org/10.1016/j.jmmm.2014.09.013

Shah, Tayyab Raza, and Hafiz Muhammad Ali. "Applications of hybrid nanofluids in solar energy, practical limitations and challenges: a critical review." Solar Energy 183 (2019): 173-203. https://doi.org/10.1016/j.solener.2019.03.012

Devi, S. Suriya Uma, and S. P. Anjali Devi. "Numerical investigation of three-dimensional hybrid Cu-Al2O3/water nanofluid flow over a stretching sheet with effecting Lorentz force subject to Newtonian heating." Canadian Journal of Physics 94, no. 5 (2016): 490-496. https://doi.org/S10.1139/cjp-2015-0799

Devi, S. P. Anjali, and S. Suriya Uma Devi. "Numerical investigation of hydromagnetic hybrid Cu-Al2O3/water nanofluid flow over a permeable stretching sheet with suction." International Journal of Nonlinear Sciences and Numerical Simulation 17, no. 5 (2016): 249-257. https://doi.org/10.1515/ijnsns-2016-0037

Jamshed, Wasim, and Asim Aziz. "Cattaneo-Christov based study of TiO2-CuO/EG Casson hybrid nanofluid flow over a stretching surface with entropy generation." Applied Nanoscience 8, no. 4 (2018): 685-698. https://doi.org/10.1007/s13204-018-0820-y

Ghadikolaei, S. S., M. Gholinia, M. E. Hoseini, and D. D. Ganji. "Natural convection MHD flow due to MoS2-Ag nanoparticles suspended in C2H6O2H2O hybrid base fluid with thermal radiation." Journal of the Taiwan Institute of Chemical Engineers 97 (2019): 12-23. https://doi.org/10.1016/j.jtice.2019.01.028

Ghadikolaei, S. S., M. Yassari, H. Sadeghi, Kh Hosseinzadeh, and D. D. Ganji. "Investigation on thermophysical properties of TiO2-Cu/H2O hybrid nanofluid transport dependent on shape factor in MHD stagnation point flow." Powder Technology 322 (2017): 428-438. https://doi.org/10.1016/j.powtec.2017.09.006

Ahmed, Naveed, Fitnat Saba, Umar Khan, Ilyas Khan, Tawfeeq Abdullah Alkanhal, Imran Faisal, and Syed Tauseef Mohyud-Din. "Spherical Shaped (Ag−Fe3O4/H2O) Hybrid Nanofluid Flow Squeezed between Two Riga Plates with Nonlinear Thermal Radiation and Chemical Reaction Effects." Energies 12, no. 1 (2018): 76. https://doi.org/10.3390/en12010076

Manjunatha, S., B. Ammani Kuttan, S. Jayanthi, Ali Chamkha, and B. J. Gireesha. "Heat transfer enhancement in the boundary layer flow of hybrid nanofluids due to variable viscosity and natural convection." Heliyon 5, no. 4 (2019): e01469. https://doi.org/10.1016/j.heliyon.2019.e01469

Hosseinzadeh, Kh, A. R. Mogharrebi, A. Asadi, Mohammadamin Sheikhshahrokhdehkordi, Seyedmohammad Mousavisani, and D. D. Ganji. "Entropy generation analysis of mixture nanofluid (H2O/C2H6O2)-Fe3O4 flow between two stretching rotating disks under the effect of MHD and nonlinear thermal radiation." International Journal of Ambient Energy 43, no. 1 (2022): 1045-1057. https://doi.org/10.1080/01430750.2019.1681294

Sundar, L. Syam, Manoj K. Singh, and Antonio C. M. Sousa. "Investigation of thermal conductivity and viscosity of Fe3O4 nanofluid for heat transfer applications." International Communications in Heat and Mass Transfer 44 (2013): 7-14. https://doi.org/10.1016/j.icheatmasstransfer.2013.02.014

Afrand, Masoud, Davood Toghraie, and Nima Sina. "Experimental study on thermal conductivity of water-based Fe3O4 nanofluid: development of a new correlation and modeled by artificial neural network." International Communications in Heat and Mass Transfer 75 (2016): 262-269. https://doi.org/10.1016/j.icheatmasstransfer.2016.04.023

Afrand, Masoud, Davood Toghraie, and Behrooz Ruhani. "Effects of temperature and nanoparticles concentration on rheological behavior of Fe3O4-Ag/EG hybrid nanofluid: an experimental study." Experimental Thermal and Fluid Science 77 (2016): 38-44. https://doi.org/10.1016/j.expthermflusci.2016.04.007

Adekola, Kehinde Adedeji. "Engineering review food extrusion technology and its applications." Journal of Food Science and Engineering 6, no. 3 (2016): 149-168. https://doi.org/10.17265/2159-5828/2016.03.005

Breitenbach, Jörg. "Melt extrusion: from process to drug delivery technology." European Journal of Pharmaceutics and Biopharmaceutics 54, no. 2 (2002): 107-117. https://doi.org/10.1016/S0939-6411(02)00061-9

Deshpande, Soham, and Yogesh Deshpande. "A review on cooling systems used in machining processes." Materials Today: Proceedings 18 (2019): 5019-5031. https://doi.org/10.1016/j.matpr.2019.07.496

Abbas, Naseem, Muhammad Bilal Awan, Mohammed Amer, Syed Muhammad Ammar, Uzair Sajjad, Hafiz Muhammad Ali, Nida Zahra, Muzamil Hussain, Mohsin Ali Badshah, and Ali Turab Jafry. "Applications of nanofluids in photovoltaic thermal systems: a review of recent advances." Physica A: Statistical Mechanics and its Applications 536 (2019): 122513. https://doi.org/10.1016/j.physa.2019.122513

Gbadamosi, Afeez O., Radzuan Junin, Muhammad A. Manan, Nurudeen Yekeen, Augustine Agi, and Jeffrey O. Oseh. "Recent advances and prospects in polymeric nanofluids application for enhanced oil recovery." Journal of Industrial and Engineering Chemistry 66 (2018): 1-19. https://doi.org/10.1016/j.jiec.2018.05.020

Al-Habahbeh, O. M., M. Al-Saqqa, M. Safi, and T. Abo Khater. "Review of magnetohydrodynamic pump applications." Alexandria Engineering Journal 55, no. 2 (2016): 1347-1358. https://doi.org/10.1016/j.aej.2016.03.001

Naramgari, Sandeep, and C. Sulochana. "MHD flow over a permeable stretching/shrinking sheet of a nanofluid with suction/injection." Alexandria Engineering Journal 55, no. 2 (2016): 819-827. https://doi.org/10.1016/j.aej.2016.02.001

Dhanai, Ruchika, Puneet Rana, and Lokendra Kumar. "Multiple solutions of MHD boundary layer flow and heat transfer behavior of nanofluids induced by a power-law stretching/shrinking permeable sheet with viscous dissipation." Powder Technology 273 (2015): 62-70. https://doi.org/10.1016/j.powtec.2014.12.035

Makinde, Oluwole D., and A. Aziz. "Boundary layer flow of a nanofluid past a stretching sheet with a convective boundary condition." International Journal of Thermal Sciences 50, no. 7 (2011): 1326-1332. https://doi.org/10.1016/j.ijthermalsci.2011.02.019

Waini, Iskandar, Anuar Ishak, Teodor Groşan, and Ioan Pop. "Mixed convection of a hybrid nanofluid flow along a vertical surface embedded in a porous medium." International Communications in Heat and Mass Transfer 114 (2020): 104565. https://doi.org/10.1016/j.icheatmasstransfer.2020.104565

Yashkun, Ubaidullah, Khairy Zaimi, Nor Ashikin Abu Bakar, Anuar Ishak, and Ioan Pop. "MHD hybrid nanofluid flow over a permeable stretching/shrinking sheet with thermal radiation effect." International Journal of Numerical Methods for Heat & Fluid Flow (2020). https://doi.org/10.1108/HFF-02-2020-0083

Tlili, Iskander, Hossam A. Nabwey, G. P. Ashwinkumar, and N. Sandeep. "3-D magnetohydrodynamic AA7072-AA7075/methanol hybrid nanofluid flow above an uneven thickness surface with slip effect." Scientific Reports 10, no. 1 (2020): 1-13. https://doi.org/10.1038/s41598-020-61215-8

Daniel, Yahaya Shagaiya, Zainal Abdul Aziz, Zuhaila Ismail, and Faisal Salah. "Effects of slip and convective conditions on MHD flow of nanofluid over a porous nonlinear stretching/shrinking sheet." Australian Journal of Mechanical Engineering 16, no. 3 (2018): 213-229.

Sulochana, C., T. Prasanna Kumar, M. S. Uma, and L. Thulasi. "MHD Darcy-Forchheimer hybrid nanofluid flow past a nonlinear stretching surface: Numerical study." In IOP Conference Series: Materials Science and Engineering, vol. 1145, no. 1, p. 012042. IOP Publishing, 2021. https://doi.org/10.1088/1757-899X/1145/1/012042

Sulochana, C., and T. Prasanna Kumar. "Electromagnetohydrodynamic boundary layer flow in hybrid nanofluid with thermal radiation effect: Numerical simulation." Heat Transfer (2022). https://doi.org/10.1002/htj.22509

Sulochana, C., and T. Prasanna Kumar. "Heat Transfer of SWCNT-MWCNT Based Hybrid Nanofluid Boundary Layer Flow with Modified Thermal Conductivity Model." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 92, no. 2 (2022): 13-24. https://doi.org/10.37934/arfmts.92.2.1324

Sulochana, C., and T. Prasanna Kumar. "Regression modelling of hybrid nanofluid flow past an exponentially stretching/shrinking surface with heat source-sink effect." Materials Today: Proceedings 54 (2022): 669-676. https://doi.org/10.1016/j.matpr.2021.10.375