Effect of Vibration on Mechanical Properties in Sand Casting Process using Organic Binder

Authors

  • Shah Alam Bhuiyan Department of Mechanical & Production Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh
  • Anayet U Patwari Department of Mechanical & Production Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh
  • Wasib U Navid Department of Mechanical & Production Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh
  • Rahman M Morshed Department of Mechanical & Production Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh
  • Sakib A Showkhin Department of Mechanical & Production Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh

DOI:

https://doi.org/10.37934/aram.111.1.18

Keywords:

Vibration, casting, aluminium, mechanical properties, organic binder

Abstract

Casting setups must create the components with a short lead time in today's highly competitive world market. This essential industry now demands defect-free castings with low production costs. Rejection of casted products is caused due to defective components which are influenced by various factors which includes process parameters, all of which can be optimized to improve the quality of the casted products. In this study, an experimental approach was made using vibrated assisted techniques to assess the applicability of the method and improvement of the quality of the casted parts using organic binders in terms of mechanical properties especially the tensile strength, hardness and micro-structure of the products.  After investigations, it has been observed that with the influence of vibration frequency at 40 Hz with amplitude 2 V the tensile strength has been improved from 176.60 MPa to 180.81 MPa, hardness improvement from HB33 to HB36 and uniformity in the micro-structure has been observed.

Downloads

Download data is not yet available.

Author Biographies

Shah Alam Bhuiyan, Department of Mechanical & Production Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh

alomdcc@gmail.com

Anayet U Patwari, Department of Mechanical & Production Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh

apatwari@iut-dhaka.edu

Wasib U Navid, Department of Mechanical & Production Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh

wasibulnavid@iut-dhaka.edu

Rahman M Morshed, Department of Mechanical & Production Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh

marufmorshed@iut-dhaka.edu

Sakib A Showkhin, Department of Mechanical & Production Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh

showkhin@iut-dhaka.edu

Downloads

Published

2023-11-24

How to Cite

Shah Alam Bhuiyan, Anayet U Patwari, Wasib U Navid, Rahman M Morshed, & Sakib A Showkhin. (2023). Effect of Vibration on Mechanical Properties in Sand Casting Process using Organic Binder. Journal of Advanced Research in Applied Mechanics, 111(1), 1–8. https://doi.org/10.37934/aram.111.1.18

Issue

Vol. 111 No. 1: November (2023)

Section

Articles