Numerical Approach of Fishing Vessel Hull Form to Measure Resistance Profile and Wave Pattern of Mono-Hull Design

Authors

  • Aldias Bahatmaka Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia
  • Muhammad Yusuf Wibowo Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia
  • Andi Abdullah Ghyfery Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia
  • Muhammad Harits Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia
  • Samsudin Anis Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia
  • Deni Fajar Fitriyana Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia
  • Rizqi Fitri Naryanto Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia
  • Andri Setiyawan Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia
  • Rizki Setiadi Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia
  • Aditya Rio Prabowo Department of Mechanical Engineering, Faculty of Engineering, Universitas Sebelas Maret, 57126 Surakarta, Indonesia
  • Kim Dong Joon Department of Naval Architecture and Marine Systems Engineering, College of Engineering, Pukyong National University, 48513 Busan, South Korea

DOI:

https://doi.org/10.37934/arfmts.104.1.111

Keywords:

Numerical approach, fishing vessel, resistance, wave pattern, mono-hull

Abstract

Indonesia is a maritime country with two-thirds of its territory is the ocean. Indonesia has a diversity of marine resources with a total fish production continuing each year to reach 8.02 million tons. The traditional fishing vessel is one of transportation and livelihood support in Indonesia and the vessel was made based on the knowledge from generation to generation. Thus, the investigation of the fishing vessels must be conducted to measure the resistance profile and wave pattern. This analysis is conducted to consider the mono-hull fishing vessel design. The use of a numerical approach is rapid to predict the performance of ship design. The resistance analysis is investigated using Savitsky’s mathematical model and Holtrop’s regression method. Comparing studies is the main focus to describe the effectiveness of the methodology. The research will present the three variations of the hull for the mono-hull design. By comparing both methods, the best design makes the methods well enough to be used for resistance analysis, especially in the fishing vessel design.

Downloads

Download data is not yet available.

Author Biographies

Aldias Bahatmaka, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia

aldiasbahatmaka@mail.unnes.ac.id

Muhammad Yusuf Wibowo, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia

myusufwibowo014@students.unnes.ac.id

Andi Abdullah Ghyfery, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia

andiabdullah791@gmail.com

Muhammad Harits, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia

mharits32@students.unnes.ac.id

Samsudin Anis, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia

samsudin_anis@mail.unnes.ac.id

Deni Fajar Fitriyana, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia

deniifa89@mail.unnes.ac.id

Rizqi Fitri Naryanto, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia

rizqi_fitri@mail.unnes.ac.id

Andri Setiyawan, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia

andrisetiyawan@mail.unnes.ac.id

Rizki Setiadi, Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, 50229 Semarang, Indonesia

rizkisetiadi@mail.unnes.ac.id

Aditya Rio Prabowo, Department of Mechanical Engineering, Faculty of Engineering, Universitas Sebelas Maret, 57126 Surakarta, Indonesia

aditya.rio@staff.uns.ac.id

Kim Dong Joon, Department of Naval Architecture and Marine Systems Engineering, College of Engineering, Pukyong National University, 48513 Busan, South Korea

djkim@pknu.ac.kr

Downloads

Published

2023-04-03

How to Cite

Aldias Bahatmaka, Muhammad Yusuf Wibowo, Andi Abdullah Ghyfery, Muhammad Harits, Samsudin Anis, Deni Fajar Fitriyana, Rizqi Fitri Naryanto, Andri Setiyawan, Rizki Setiadi, Aditya Rio Prabowo, & Kim Dong Joon. (2023). Numerical Approach of Fishing Vessel Hull Form to Measure Resistance Profile and Wave Pattern of Mono-Hull Design. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 104(1), 1–11. https://doi.org/10.37934/arfmts.104.1.111

Issue

Vol. 104 No. 1: April (2023)

Section

Articles
Crossref
Scopus
Google Scholar
Europe PMC

Most read articles by the same author(s)

<< < 1 2