Vol. 104 No. 1: April (2023)

View Vol. 104 No. 1: April (2023)

EDITOR'S CHOICE

Effect of Fluid Mechanics System in Growth of Vegetable Crops using Hydroponics Technique Compared to Conventional System
Sanidhya Ranganath, Tejaswini Nagaraj, Rashmi Shivanna

 
Published: 2023-04-03

Articles

  • Numerical Approach of Fishing Vessel Hull Form to Measure Resistance Profile and Wave Pattern of Mono-Hull Design

    Aldias Bahatmaka, Muhammad Yusuf Wibowo, Andi Abdullah Ghyfery, Muhammad Harits, Samsudin Anis, Deni Fajar Fitriyana, Rizqi Fitri Naryanto, Andri Setiyawan, Rizki Setiadi, Aditya Rio Prabowo, Kim Dong Joon
    1-11
    DOI: https://doi.org/10.37934/arfmts.104.1.111

  • Effect of Fluid Mechanics System in Growth of Vegetable Crops using Hydroponics Technique Compared to Conventional System

    Sanidhya Ranganath, Tejaswini Nagaraj, Rashmi Shivanna
    12-20
    DOI: https://doi.org/10.37934/arfmts.104.1.1220

  • Thin-Layer Drying of Burdock Root in a Convective Dryer: Drying Kinetics and Numerical Simulation

    Luan Thanh Nguyen, Minh Ha Nguyen, Hong Son Nguyen Le
    21-36
    DOI: https://doi.org/10.37934/arfmts.104.1.2136

  • Exergy and Energy Analysis of Gas Turbine Generator X Combined Cycle Power Plant Using Cycle-Tempo Software

    Eflita Yohana, Tony Suryo Utomo, Muhammad Ichwan Faried, Mohammad Farkhan Hekmatyar Dwinanda, Mohamad Endy Yulianto
    37-46
    DOI: https://doi.org/10.37934/arfmts.104.1.3746

  • Application of Avocado Seed as Textile Natural Dye

    Adhi Kusumastuti , Nova Auliyana, Monna Rozana
    47-54
    DOI: https://doi.org/10.37934/arfmts.104.1.4754

  • A Study of the Thermal Behavior of Some Materials Used to Prevent Corrosion in Mechanical Parts

    Nawfel Muhammed Baqer Muhsin
    55-64
    DOI: https://doi.org/10.37934/arfmts.104.1.5564

  • Study on Impact of Magnetic Dipole and Thermal Radiation on Flow/Heat Transfer of Jeffery Fluid over Stretching Sheet with Suction/Injection

    Michael Iyoko, Bakai Ishola Olajuwon
    65-83
    DOI: https://doi.org/10.37934/arfmts.104.1.6583

  • Analytical Computation of Thermal and Electrical Issues in E-Mobility Cabling Network

    Mahipal Bukya, Rajesh Kumar, Akhilesh Mathur
    84-92
    DOI: https://doi.org/10.37934/arfmts.104.1.8492

  • Steam Methane Reforming in a Swirling Flow: Effect of Reformer Design Parameters

    Igor Karpilov, Ravil Mustafin
    93-105
    DOI: https://doi.org/10.37934/arfmts.104.1.93105

  • Effects of Hall Current, Diffusion Thermos and Activation Energy on MHD Radiative Casson Nanofluid Flow with Chemical Reaction and Thermal Radiation

    Sridevi Dandu, Venkata Ramana Murthy Chitrapu, Udaya Bhaskara Varma Nadimpalli
    106-123
    DOI: https://doi.org/10.37934/arfmts.104.1.106123

  • Effect of the Catalyst Shapes and the Packed Bed Structure on the Efficiency of Steam Methane Reforming

    Ravil Mustafin, Igor Karpilov
    124-140
    DOI: https://doi.org/10.37934/arfmts.104.1.124140

  • The Influence of Heat Recirculation Segment of Meso-Scale Combustor o Gas and Liquid Fuel Inside Microscale Combustor

    Sudarman, Achmad Fauzan Hery Soegiharto, Adi Suyanto, Mohamad Irkham Mamungkas, Evita Leninda Fahriza Ayuni
    141-151
    DOI: https://doi.org/10.37934/arfmts.104.1.141151

  • Hall Current and Thermal Radiation Effects on MHD Nanofluid in the Presence of Heat Source/Sink, Brownian Motion and Thermophoresis with Inclined Plates

    Neeraja Gopalam, Saila Kumari Annareddy
    152-168
    DOI: https://doi.org/10.37934/arfmts.104.1.152168

  • Techno-Economic Assessment of Wind Energy in Urban Environments: A Case Study in Pattaya, Thailand

    Chatchawich Chaihong, Juntakan Taweekun
    169-184
    DOI: https://doi.org/10.37934/arfmts.104.1.169184

  • Effectiveness of Cone Angle on Surface Pressure Distribution along Slant Length of a Cone at Hypersonic Mach Numbers

    Javed Shoukat Shaikh, Khizar Ahmed Pathan, Krishna Kumar, Sher Afghan Khan
    185-203
    DOI: https://doi.org/10.37934/arfmts.104.1.185203