Flow Simulations of Generic Vehicle Model SAE type 4 and DrivAer Fastback using OpenFOAM

Authors

  • Nur Haziqah Shaharuddin Wind Engineering for Environment, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, 54100 Kuala Lumpur, Malaysia
  • Mohamed Sukri Mat Ali Wind Engineering for Environment, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, 54100 Kuala Lumpur, Malaysia
  • Shuhaimi Mansor Faculty of Mechanical Engineering, Universiti TeknologiMalaysia, 81310 Skudai, Johor, Malaysia
  • Sallehuddin Muhamad Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia, 54100 Kuala Lumpur, Malaysia
  • Sheikh Ahmad Zaki Shaikh Salim Wind Engineering for Environment, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, 54100 Kuala Lumpur, Malaysia
  • Muhammad Usma Department of Mechanical Engineering, University Of Gujrat, Hayat Campus JalalpurRoad Gujrat, Pakistan

Keywords:

OpenFOAM , Flow Simulation, AE Type 4 , DrivAer Fastback

Abstract

A portion of rural and remote areas in Malaysia still do not have access to grid electricity and in near future they are unlikely to get grid access. Lack of electricity in rural areas jeopardises development and exacerbate the poverty. Decentralized off-grid rural electrification system that integrates various renewable energy sources became inevitable for areas where grid connection is neither available nor feasible. Moreover, designing and implementation of efficient and techno-economically viable off-grid electric supply is a challenging task. A hybrid combination of renewable energy technologies is appeared to be a suitable candidate over grid extension for remote areas. In this study, we model viable off-grid rural electrification system for a remote village Kampung Sungai Tiang located in Belum, Perak. We consider prospective electricity demand of the village and utilize available renewable resources to generate electricity to fulfil the demand. An optional diesel generator has been considered as backup power supplier whenever the renewable technologies cannot support the demand. This study implemented HOMER software to determine optimum electrification systems for the village and evaluate their techno economic performance. The simulation results reveal that Hybrid PV-Diesel-Biomass system is a better option to be implemented in this village in regard to viability, techno-economic performance, and environmental friendliness.

Downloads

Download data is not yet available.

Downloads

Published

2017-09-15

How to Cite

Nur Haziqah Shaharuddin, Mohamed Sukri Mat Ali, Shuhaimi Mansor, Sallehuddin Muhamad, Sheikh Ahmad Zaki Shaikh Salim, & Muhammad Usma. (2017). Flow Simulations of Generic Vehicle Model SAE type 4 and DrivAer Fastback using OpenFOAM. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 37(1), 18–31. Retrieved from https://semarakilmu.com.my/journals/index.php/fluid_mechanics_thermal_sciences/article/view/2625

Issue

Section

Articles

Most read articles by the same author(s)

<< < 1 2