Vol. 122 No. 1: October (2024)

View Vol. 122 No. 1: October (2024)

EDITOR'S CHOICE

Design of Open Flume Turbine using Specific Speed of Power and Discharge

Warjito, Kevin Kameswara, Budiarso, Muhamad Mizan, Sanjaya Baroar Sakti Nasution, Muhammad Agil Fadhel Kurnianto, Christopher Clement Rusli

 

Published: 2024-10-10

Articles

  • Wind Rose Analysis of Temperature Variation with Sensor Implantation Technique for Wind Turbine

    Anant Sidhappa Kurhade, Pushparaj Warke, Kamalkishor Maniyar, Parimal Sharad Bhambare, Shital Yashwant Waware, Sushil Deshpande, Sunilkumar Harsur, Murlidhar Ingle, Pankaj Kolhe, Prashant Ashok Patil, Pallavi Jadhav, Prajakta Pawar
    1-18
    DOI: https://doi.org/10.37934/arfmts.122.1.118

  • Carboxymethyl Cellulose–Ammonium Formate Biopolymer Electrolyte: Ionic Conductivity and Electrical Properties

    Mohd Ibnu Haikal Ahmad Sohaimy, Muthiah Muthuvinayagam, Mohd Ikmar Nizam Mohamad Isa
    19-30
    DOI: https://doi.org/10.37934/arfmts.122.1.1930

  • Relationship between Viscosity and Surface Tension as a Solution to Fractional Differential Equations

    Endang Rusyaman, Kankan Parmikanti, Diah Chaerani, Muhamad Deni Johansyah, Muhammad Yorga Permana
    31-42
    DOI: https://doi.org/10.37934/arfmts.122.1.3142

  • Numerical Investigation of Archimedes Screw Turbines under Low-Head Conditions

    Muhammad Ilham Maulana, Ahmad Syuhada, Deendarlianto, Syafiie Syam, Fikri Fiqi Aulia
    43-55
    DOI: https://doi.org/10.37934/arfmts.122.1.4355

  • Design of Open Flume Turbine using Specific Speed of Power and Discharge

    Warjito, Kevin Kameswara, Budiarso, Muhammad Mizan, Sanjaya Baroar Sakti Nasution, Muhammad Agil Fadhel Kurnianto, Christopher Clement Rusli
    56-68
    DOI: https://doi.org/10.37934/arfmts.122.1.5668

  • Numerical Analysis of the Influence of the Rolling Speed on the Cold Rolling under Specific Thermal Condition of the AA 5052-O Aluminum Alloy

    Sami Ali Nawi, Ahmed Abed Ali Ghaidan Al-Rubaiy, Ayad Naseef Jasim, Hussein Kadhim Sharaf, Muzher Taha Muhammad
    69-79
    DOI: https://doi.org/10.37934/arfmts.122.1.6979

  • Optimization of Upstream Natural Gas Compression Processes based on Sensitivity Analysis of Gas Throughput

    Muhammad Fakhrizal Fahmi, Renanto Handogo, Juwari Purwo Sutikno, Rendra Panca Anugraha, Rizal Arifin
    80-93
    DOI: https://doi.org/10.37934/arfmts.122.1.8093

  • Effect of Thermophoresis and Heat Source on Unsteady Hydromagnetic Free Convective Fluid Flow Embedded in a Porous Material

    Shaik Nuslin Bibi, Gunampalle Padma, Sagi Lalitha, Puliyeddula Sarada
    94-106
    DOI: https://doi.org/10.37934/arfmts.122.1.94106

  • Numerical Investigation of Contra Rotating Propeller Efficiency on Ferries through CFD Simulation

    Muhammad Iqbal Nikmatullah, Andi Haris Muhammad, Baharuddin, Ridha Sulistyawati Rasyid, Andi Hirawaty Subhan Putri
    107-117
    DOI: https://doi.org/10.37934/arfmts.122.1.107117

  • The Impact of Alternative Fuels on the Performance and Emissions of Petrol Engines: A Review

    Mohamed Hofny, Nouby Ghazaly, Ahmed Shmroukh, Mostafa Abouelsoud
    118-162
    DOI: https://doi.org/10.37934/arfmts.122.1.118162

  • Numerical Analysis of Strut Thickness and Placement Effects on H-Darrieus Vertical-Axis Water Turbine

    Yoyok Setyo Hadiwidodo, Radiktya Gilang Permana
    163-174
    DOI: https://doi.org/10.37934/arfmts.122.1.163174

  • Enhancing Efficiency in Deep-V Planing Hull Ships: A Study on The Design of Spray Strips to Minimize Resistance

    Samuel, Syihan Raditya Siregar, Alfin Firmansyah, Ari Wibawa, Parlindungan Manik, Dian Purnama Sari
    175-188
    DOI: https://doi.org/10.37934/arfmts.122.1.175188

  • Physical and Mechanical Properties of Autoclaved Aerated Concrete (AAC) with Ceramic and Gypsum Waste (CGW) Addition Before and After Exposure to Direct Fire at Temperatures up to 920°C

    Efil Yusrianto, Noraini Marsi, Izzati Abdul Manaf, Hafizuddin Hakim Shariff
    189-204
    DOI: https://doi.org/10.37934/arfmts.122.1.189204

  • Modeling and Experimental Validation of NePCM-Nanofluid-Based PVT System

    Fahim Rahim Sheikh, Suresh Pandurang Deshmukh, Purushottam Ardhapurkar, Khizar Ahmed Pathan, Sohel Khalil Shaikh, Sher Afghan Khan
    205-222
    DOI: https://doi.org/10.37934/arfmts.122.1.205222

  • Energy-Exergy Analysis of CI Engine Fueled with Moringa Oleifera Biodiesel at Different Loading Conditions

    Vasant Patel, Vyomesh Buch
    223-243
    DOI: https://doi.org/10.37934/arfmts.122.1.223243

  • Alternative Fuel Mixture Waste Cooking Oil (WCO) and Corn Oil: Transforming Hazard into Renewable Energy

    Suardi, Muhammad Uswah Pawara, Wira Setiawan, Faisal Mahmuddin, Syerly Klara
    244-257
    DOI: https://doi.org/10.37934/arfmts.122.1.244257