Semarak Ilmu Publishing Journals
Journal of Advanced Research in Numerical Heat Transfer
Current Issue
Aims & Scope
Journal of Advanced Research in Numerical Heat Transfer provides a worldwide platform for researchers, engineers, scientists and mathematicians to disseminate novel ideas, share preliminary findings of ongoing investigations, discussions, and criticisms in the field of heat transfer. This journal is a peer-review international journal that focuses on numerical solutions, with an emphasis on contributions which increase the basic understanding of the heat transfer mechanism and their application to engineering problems. Experimental research which supports the numerical solutions are also acceptable.
CURRENT ISSUE
In Progress
Editorial Team
Dr. Wan Mohd. Arif Aziz Japar (E-mail)
Universiti Teknologi Malaysia, Malaysia
Prof. Dr. Anuar Ishak (E-mail)
School of Mathematical Sciences, Universiti Kebangsaan Malaysia, Malaysia
Dr. Yu Kok Hwa (E-mail)
School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia, Malaysia
Dr. Ahmad Muhsin Ithnin (E-mail)
Malaysia-Japan International Institute of Technology, Universiti Teknology Malaysia, Malaysia
Dr. Jawad Raza (E-mail)
Universiti Utara Malaysia, Malaysia
Professor Dr. Mazlan Abdul Wahid (E-mail)
School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Malaysia
Assoc. Prof. Dr. Wan Azmi (E-mail)
Faculty of Mechanical Engineering, Universiti Malaysia Pahang, Malaysia
Dr. Mohammad Rasidi Mohammad Rasani (E-mail)
Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Malaysia
Dr. Chan Sze Qi (E-mail)
Faculty of Applied Sciences and Technology, Universiti Tun Hussein Onn Malaysia, Malaysia
Dr. Mohammed W. Muhieldeen Al-Gailani (E-mail)
Faculty of Engineering, Technology and Built Environment, UCSI University,
Kuala Lumpur, Malaysia
Dr. Nurhazimah Nazmi (E-mail)
Malaysia-Japan International Institute of Technology,
Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
Dr. Omer Adnan Alawi (E-mail)
Research Management Center,
Universiti Teknologi Malaysia, Johor, Malaysia
Ir. Dr. Mohd Rosdzimin ABdul Rahman (E-mail)
Faculty of Engineering, Universiti Pertahanan Nasional Malaysia,
Kuala Lumpur, Malaysia
Dr. Siti Ujila Masuri (E-mail)
Department of Mechanical and Manufacturing Engineering,
Universiti Putra Malaysia, Selangor, Malaysia
Dr. Osamah Siddiqui (E-mail)
University of Ontario Institute of Technology Oshawa, ON, Canada
Dr. Alok Kumar Pandey (E-mail: mr.alokpandey1@gmail.com)
Department of Mathematics, Graphic Era Deemed to be University, India
Assoc. Prof. Dr. Chungpyo Hong (E-mail)
Dept. Mechanical Eng.,Kagoshima University, Japan
Assistant Professor Dr. N. Vishnu Ganesh (E-mail)
Department of Mathematics, Ramakrishna Mission Vivekananda College, Mylapore, India
Dr. Vahid Beygzade (E-mail)
Urmia University of Technology, Iran
Dr. Mahmoud Ahmed Alamir (E-mail)
College of Science and Engineering, Flinders University, Australia
Muhammad Sohail (E-mail)
Institute of Space Technology, Islamabad, Pakistan
Dr. Ali Mohammed Hayder (E-mail)
Technical university in Najaf, Iraq
Dr. Jafar Hasnain (E-mail)
Department of Computer Science, Bahria University Islamabad, Islamabad, Pakistan
Dr. Mohamed Rabea Eid (E-mail)
Department of Mathematics, Faculty of Science, New Valley University, Al-Wadi Al-Gadid, Egypt
Dr. Hamzeh Taha Salman Alkasasbeh (E-mail)
Department of Mathematics, Ajloun National University, Jordan
Dr. Wadhah Hussein Al Doori (E-mail)
Petroleum and Gas Refining Engineering Department,
College of Petroleum Processes Engineering, Tikrit University, Iraq
Journal of Advanced Research in Applied Mechanics
Current Issue
About the Journal
The journal is concerned with high-level investigations of modern physical and mechanical problems and reports current progress in this field. The journal also encourages contributions from the newly emerging areas such as biomechanics, electromechanics, the mechanical behavior of advanced materials, nanomechanics, and many other inter-disciplinary research areas in which the concepts of applied mechanics are extensively applied and developed.
MOST CITED ARTICLES
Morsy, M., Fahmy, M., Abd Elshakour, H., Belal, A.M.
Sustainable power generation pathways in Malaysia: Development of long-range scenarios,
Samsudin, M.S.N., Rahman, M.M., Wahid, M.A.
A simulation on the effect of ultrasonic vibration on ultrasonic assisted soldering of Cu/SAC305/Cu joint,
Sharaf, Hussein, Jalil, Nawal Aswan Abdul, Salman, Sadeq
Editorial Team
Dr. Mohd Yazid Yahya(E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Malaysia
Dr. Reazul haq Abdul Haq (E-mail)
Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Malaysia
Dr. Mohd Kameil Abdul Hamid (E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Malaysia
Matzaini Katon (E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi MARA, (Terengganu Campus) Malaysia
Ir. Dr.-Ing. Azrul Azwan Abdul Rahman (E-mail)
Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Malaysia
Dr. Nurul Aini Bani (E-mail)
Razak Faculty of Technology & Informatics, Universiti Teknologi Malaysia, Malaysia
Siti Khadijah Alias (E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi MARA, Malaysia
Mohd Noor Halmy Ab Latif (E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi MARA, Malaysia
Dr. Fudhail Abdul Munir (E-mail)
Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Malaysia
Nursabillilah Mohd Ali (E-mail)
Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka, Malaysia
Dr. Rahimah Muhamad (E-mail)
Fakulti Teknologi & Informatik Razak, Universiti Teknologi Malaysia, Malaysia
Dr. Muhammadu Masin Muhammadu (E-mail)
Department of Mechanical Engineering, Federal University of Technology, Nigeria
Dr. Makatar Wae-hayee (E-mail)
Graduate School, Prince of Songkla University, Songkhla, Thailand
Alireza Fazeli (E-mail)
Department of Applied Mathematics, Western University, Canada
Dr. Hussein Mohammed (E-mail)
Energy & Chemical Engineering, Curtin University, Australia
Dr. B. Lavanya (E-mail)
Department of Mathematics, MIT MAHE, India
Dr. Guilherme Moura Paredes (E-mail)
Development and Research in Environment, Applied Management and Space, Aalborg University, Denmark
Dr. Suhail Kazi (E-mail)
Faculty of Engineering Science and Technology, Isra University, Hyderabad, Sindh, Pakistan
Dr. Albashir Adel Youssef (E-mail)
Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Arab Academy for Science, Technology and Maritime Transport, Cairo, Egypt
Dr. Dendy Adanta (E-mail)
Department of Mechanical Engineering, Faculty of Engineering, Sriwijaya University, Indonesia
Dr. Wadhah Hussein Abdulrazzaq Al Doori (E-mail)
Faculty of Mechanical Engineering, Tikrit University, Iraq
Dr. Waqas Khalid (E-mail)
Department of Mechanical Engineering, National University of Sciences and Technology (NUST), Pakistan
Journal of Advanced Research in Applied Sciences and Engineering Technology
Current Issue
About the Journal
Journal of Advanced Research in Applied Sciences and Engineering Technology is an international forum for the publication and dissemination of original work which contributes to greater scientific understanding in the area of applied sciences and engineering technology. The Journals reports principally the achievements spanning the interdisciplinary field of applied researches. Scope of the journal includes: biology, chemistry, physics, environmental, health science, mathematics and statistics, geology, engineering, computer science, natural and technological sciences, medicine, and architecture.
MOST CITED ARTICLES
Editorial Team
Dr. Nor Azwadi Che Sidik(E-mail)
Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
Putri Shareen Rosman (E-mail)
Faculty of Applied Science, Universiti Teknologi MARA, Malaysia
Norbaiti Tukiman (E-mail)
Faculty of Computer and Mathematical Sciences, Universiti Teknologi MARA, Malaysia
Dr Zairi Ismael Rizman (E-mail)
School of Electrical Engineering, College of Engineering, Universiti Teknologi MARA, Malaysia
Tey Wah Yen (E-mail)
Department of Mechanical Engineering, Faculty of Engineering, UCSI University, Malaysia
Dr. Wan Zuki Azman Wan Muhamad (E-mail)
Institute of Engineering Mathematics, Universiti Malaysia Perlis, Malaysia
Norhisyam Jenal (E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi MARA, Malaysia
Dr. Zainiharyati Mohd Zain (E-mail)
School of Chemistry and Environment, Faculty of Applied Sciences, Universiti Teknologi MARA (UiTM) Shah Alam, Selangor Malaysia
Mohd Zulkahiri Mat Salleh (E-mail)
Faculty of Civil Engineering, Universiti Teknologi MARA, Malaysia
Dr. Syahrullail Samion (E-mail)
School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Malaysia
Hazimi Ismail (E-mail)
Faculty of Mechanical Engineering, Universiti Teknologi MARA, Malaysia
Dr Khairuddin Md Isa (E-mail)
School of Environmental Engineering, Universiti Malaysia Perlis, Malaysia
Sunny Goh Eng Giap (E-mail)
Faculty of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu, Terengganu, Malaysia
MD Azree Othuman Mydin (E-mail)
School of Housing, Building and Planning, Universiti Sains Malaysia, Penang, Malaysia
Dr. Osamah Siddiqui (E-mail)
Faculty of Engineering and Applied Science, University of Ontario Institute of Technology Oshawa, ON, Canada
Prof. G. Sarojamma (E-mail)
Department of Applied Mathematics, Sri Padmavati Womens University, India
Dr. Mahmoud Ahmed Alamir (E-mail)
College of Science and Engineering, Flinders University, Australia
Dr. Shervin Sharafatmandjoor (E-mail)
Department of Mechanical and Aerospace Engineering, Islamic Azzad University, Tehran, Iran
Dr. Syed Ali Ammar Taqvi (E-mail)
Department of Chemical Engineering, NED University of Engineering and Technology Karachi, Pakistan
Dr. Mohammad Sharif Zami (E-mail)
Department of Architecture, King Fahd University of Petroleum & Minerals, Saudi Arabia
Mahmud Jamil Muhammad (E-mail)
Department of Mechanical Engineering, Nigerian Defence Academy, Kaduna, Nigeria
Dr. Ehsan Kianpour (E-mail)
Faculty of Engineering, Islamic Azad University of Najaf Abad, Iran
Mohammad Didarul Alam (E-mail)
School of Biomedical, Materials and Mechanical Engineering, Florida International University (FIU), Florida, United States of America
Dr. Muhammadu Masin Muhammadu (E-mail)
Department of Mechanical Engineering, Federal University of Technology, Nigeria
Dr. M’hamed Beriache (E-mail)
Department of Mechanical Engineering, Faculty of Technology, Université Hassiba Benbouali, Algeria
Dr. Saeed Jamei
Department of Engineering, Faculty of Engineering, Persian Gulf University, Iran
Prof. Said E. El-Khamy (E-mail)
Department of Electrical Engineering, Faculty of EngineeringAlexandria University, Egypt
CFD Letters
Current Issue
Aims & Scope
CFD Letters publishes as rapidly as possible manuscripts of high quality which addresses eminent topics of computational fluid dynamics theory and applications. Being an international, peer-reviewed, online and open access journal, CFD Letters presents a world-wide forum for the dissemination of knowledge among engineers, scientists and mathematicians working in the field of computational fluid mechanics.
MOST CITED ARTICLES
Mesh optimization for ground vehicle Aerodynamics
Ahmad, N.E., Abo-Serie, E., Gaylard, A.
Experiments and numerical simulations on the aerodynamics of the ahmed body
Meile, W., Brenn, G., Reppenhagen, A., Lechner, B., Fuchs, A.
Analysis of area ratio in a CD nozzle with suddenly expanded duct using CFD method
Khan, S.A., Aabid, A., Ghasi, F.A.M., Al-Robaian, A.A., Alsagri, A.S.
Editorial Team
Editor-in-Chief
Dendy Adanta
Department of Mechanical Engineering,
Faculty of Engineering, Universitas Sriwijaya,
Indralaya-30662, South Sumatera,
INDONESIA
Associate Editors
Ali Cemal Benim
Department of Mechanical Engineering and Process Technology, Düsseldorf University of Applied Sciences, GERMANY
Sergei Utyuzhnikov
School of Mechanical, Aerospace and Civil Engineering, University of Manchester, U.K
Abdellah Hadjadj
National Institute of Applied Sciences of Rouen, FRANCE
Mohamed Gad-el-Hak
Department of Mechanical Engineering, Virginia Commonwealth University, U.S.A
Mahmood Khalid
Institute for Aerospace Research National Research Council CANADA
Chunlei Liang
Department of Mechanical and Aerospace Engineering, George Washington University, U.S.A
Bin Zhao
Department of Building Science, School of Architecture, Tsinghua University, CHINA
Mazlan Abdul Wahid
Department of Thermofluids, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, MALAYSIA
Karim Shalash
Institute of Mechanical Engineering, École polytechnique fédérale de Lausanne, SWITZERLAND
Iham Farid Zidane
ICollege of Engineering and Technology, Arab Academy for Science, Technology and Maritime Transport, EGYPT
Essam M. Wahba
College of Engineering, American University in Sharjah, U.A.E
Mohammad Rasul
Faculty of Science, Engineering and Health, Central Queensland University, AUSTRALIA
Jamal Naser
Faculty of Engineering & Industrial Science, Swinburne University of Technology – AUSTRALIA
Essam Eldin Khalil
Professor of Mechanical Engineering, Cairo University, Cairo- EGYPT
Mohamed Teamah
College of Engineering and Technology, Arab Academy for Science, Technology and Maritime Transport, EGYPT
Kamal Abdel Aziz Ibrahim
Faculty of Engineering, Menoufiya University, EGYPT
Raed I. Bourisli
Mechanical Engineering Department, College of Engineering and Petroleum, Kuwait University, KUWAIT
Hamdy Kandil
Faculty of Engineering & Material Science, German University in Cairo- EGYPT
Dr. Mohammad AL-Rawi
Centre for Engineering and Industrial Design, Waikato Institute of Technology, Hamilton, NEW ZEALAND
Dr. Kamarul Arifin Ahmad
Department of Aerospace Engineering, Universiti Putra Malaysia, MALAYSIA
Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Current Issue
About the Journal
This journal welcomes high-quality original contributions on experimental, computational, applied mathematics and physical aspects of fluid mechanics and thermal sciences relevant to engineering or the environment, multiphase and microscale flows, microscale electronic and mechanical systems; medical and biological systems; and thermal and flow control in both the internal and external environment.
MOST CITED ARTICLES
Water transport properties of bio-nanocomposites reinforced by sugar palm (arenga pinnata) nanofibrillated cellulose
Ilyas, R.A., Sapuan, S.M., Ishak, M.R., Zainudin, E.S.
Slip effects on peristaltic transport of Casson fluid in an inclined elastic tube with porous walls
Gudekote, M., Choudhari, R.
Analysis of MHD Jeffery Hamel flow with suction/injection by homotopy analysis method method
Hamrelaine, S., Mebarek-Oudina, F., Sari, M.R.
Editorial Team
Editor-in-Chief
Dr. Juntakan Taweekun (E-mail)
Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Songkhla, Thailand
Associate Editors
Dr. Zafar Said (E-mail)
College of Engineering, Sustainable & Renewable Energy Engineering Department, University of Sharjah, United Arab Emirates
Dr. Muhammad Noor Afiq Witri Muhammad Yazid (E-mail)
Universiti Teknologi Malaysia, Malaysia
Dr. Raoudha Chaabane (E-mail)
National Engineering School, Monastir University, Tunisia
Dr. Shervin Sharafatmandjoor (E-mail)
Islamic Azzad University, Tehran, Iran
Mohd Noor Asril Saadun (E-mail)
Universiti Teknikal Malaysia Melaka, Malaysia
Ahmad Hilmi Khalid (E-mail)
Universiti Teknologi MARA, Malaysia
Dr. Haslinda Mohamed Kamar (E-mail)
Universiti Teknologi Malaysia, Malaysia
Dr. Saeed Jamei
Persian Gulf University, Iran
Dr. M’hamed Beriache (E-mail)
Université Hassiba Benbouali, Algeria
Dr. Reazul haq Abdul Haq (E-mail)
Universiti Tun Hussein Onn Malaysia, Malaysia
Dr. Fudhail Abdul Munir (E-mail)
Universiti Teknikal Malaysia Melaka, Malaysia
Dr. Muhammadu Masin Muhammadu (E-mail)
Federal University of Technology, Nigeria
Dr. Shabudin Mat (E-mail)
Universiti Teknologi Malaysia, Malaysia
Dr. Muhamad Zaini Yunos (E-mail)
Universiti Tun Hussein Onn Malaysia, Malaysia
Mahmud Jamil Muhammad (E-mail)
Nigerian Defence Academy, Kaduna, Nigeria
Prof. Dr. Saidur Rahman (E-mail)
Sunway University, Malaysia
Alireza Fazeli (E-mail)
Western University, Canada
Tey Wah Yen (E-mail)
UCSI University, Malaysia
Dr. Wadhah Hussein Abdulrazzaq Al Doori (E-mail)
Tikrit University, Iraq
Dr. Gangtao Liang (E-mail)
Dalian University of Technology, China
Dr. Syahrullail Samion (E-mail)
Universiti Teknologi Malaysia, Malaysia
Dr. Nik Ahmad Ridhwan bin Nik Mohd (E-mail)
Universiti Teknologi Malaysia, Malaysia
Dr. Al Emran Ismail (E-mail)
Universiti Tun Hussein Onn Malaysia, Malaysia
Dr. Khalid Saqr (E-mail)
Arab Academy for Science, Technology and Maritime Transport, Egypt
Dr. Ehsan Kianpour (E-mail)
Islamic Azad University of Najaf Abad, Iran
Dr. Mohd Faizal Hasan (E-mail)
Universiti Teknologi Malaysia, Malaysia
Dr. Said Ahmad (E-mail)
Universiti Tun Hussein Onn Malaysia, Malaysia
Dr. Natrah Kamaruzaman (E-mail)
Universiti Teknologi Malaysia, Malaysia
Dr. Zurriati Mohd Ali (E-mail)
Universiti Teknologi MARA, Malaysia
Mohamad Shukri Zakaria (E-mail)
Universiti Teknikal Malaysia Melaka, Malaysia
Saidu Bello AbuBakar (E-mail)
Kano University of science and Technology, Nigeria
Dr. Ihsan Ali Ghani (E-mail)
Al-Mustansiriyah University, Iraq
Dr. Hussein Mohammed (E-mail)
Duhok Polytechnic University (DPU), Iraq
Dr. Maizirwan Mel (E-mail)
International Islamic University Malaysia, Malaysia
Dr. Hasan KÖTEN (E-mail)
Istanbul Medeniyet University, Turkey
Dr. Mohd Nasrun Mohd Nawi (E-mail)
Universiti Utara Malaysia, Malaysia
Raheem Kadhim Ajeel (E-mail)
University of Babylon, Iraq
Dr. G. Najafi (E-mail)
Tarbiat Modares University, Tehran, Iran
Dr. Mehaboob Basha (E-mail)
King Fahd University of Petroleum & Minerals, Saudi Arabia
Mohammed W. Muhieldeen Al-Gailani (E-mail)
UCSI University, Malaysia
Dr. Syed Ali Ammar Taqvi (E-mail)
NED University of Engineering and Technology Karachi, Pakistan
Prof. Cesare Biserni (E-mail)
Department of Industrial Engineering, University of Bologna, Italy
Journal of Advanced Research in Micro and Nano Engineering
Current Issue
Aims & Scope
Journal of Advanced Research in Micro and Nano Engineering is a peer-reviewed international journal, collects original contributions in all major area of micro- and nano engineering. The journal covers fundamental and applied research in all disciplines of science, engineering and medicine. Scope of the journal includes materials synthesis, processing, fabrication, spectroscopy, properties, biological systems, micro- and nanostructures, theory and computation, etc.
MOST CITED ARTICLES
Effects of The Optimal Imposition of Viscous and Thermal Forces on Spectral Dynamical Features of Swimming of a Microorganism in Nanofluids
Shervin Sharafatmandjoor, C. S. Nor Azwadi
Effects of Solar Radiation and Viscous Dissipation on Mixed Convective Non-Isothermal Hybrid Nanofluid over Moving Thin Needle
Sultana Jahan et al
Performance of Solar Thermal Collector Using Multi-Walled Carbon Nanotubes: Simulation Study
Omer A. Alawi, Haslinda Mohamed Kamar
Editorial Team
Editor-in-Chief
Dr. Fauzan Ahmad
Malaysia-Japan International Institute of Technology,
Universiti Teknologi Malaysia, Malaysia
Associate Editors
Dr. Muhammad Noor Nordin (E-mail)
British Malaysia Institue, Universiti Kuala Lumpur, Malaysia
Mazlan Mohamed (E-mail)
Fakulti Biokejuruteraan Dan Teknologi, Universiti Malaysia Kelantan, Malaysia
Funmilayo Oyelami(E-mail:oyelamifunmilayo@abuad.edu.ng)
Department of Mathematical and Physical Sciences, Afe Babalola University, Ado-Ekiti, Nigeria
Dr. Raheem K. Ajeel(E-mail:raheem@ukm.edu.my)
Solar Energy Reasearch Institute, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
Professor Talal Yusaf(E-mail:t.yusaf@cqu.edu.au)
School of Engineering and Technologies, Central Queensland University, Rockhampton, QLD 4701, Australia
Rui He(Email: henry-hr@zju.edu.cn)
College of Civil Engineering and Architecture, Zhejiang Univ., Hangzhou 310027, PR China.
Mohammad Khairul Azhar Abdul Razab (E-mail)
Medical Radiations Programme, Universiti Sains Malaysia Health Campus, Malaysia
Dr. Jawad Raza (E-mail)
Universiti Utara Malaysia, Malaysia
Dr. Khairul Fadzli Samat (E-mail)
Fakulti Kejuruteraan Pembuatan, Universiti Teknikal Malaysia Melaka, Malaysia
Siti Fairuz Yusoff (E-mail)
Faculty of Technical and Vocational, Universiti Pendidikan Sultan Idris, Malaysia
Dr. Ervina Efzan Mhd Noor (E-mail)
Faculty of Engineering and Technology, Multimedia University,
Melaka, Malaysia
Dr. Fauzan Ahmad (E-mail)
Malaysia-Japan International Institute of Technology,
Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
Dr. Liew Pay Jun (E-mail)
Faculty of Manufacturing Engineering,
Universiti Teknikal Malaysia Melaka, Melaka, Malaysia
Associate Editors
Dr. Natrah Kamaruzaman (E-mail)
School of Mechanical Engineering, Faculty of Engineering,
Universiti Teknologi Malaysia, Johor, Malaysia
Dr. Nur Azmah Nordin (E-mail)
Malaysia-Japan International Institute of Technology,
Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
Dr. Omer Adnan Alawi (E-mail)
Research Management Center,
Universiti Teknologi Malaysia, Johor, Malaysia
Dr. Shahira Liza Kamis (E-mail)
Malaysia-Japan International Institute of Technology,
Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
Ts. Dr. Siti Aishah Abdul Aziz (E-mail)
Malaysia-Japan International Institute of Technology,
Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
Dr. Alok Kumar Pandey (E-mail: mr.alokpandey1@gmail.com)
Department of Mathematics, Graphic Era Deemed to be University, India
Dr. Siti Hamidah Mohd Setapar (E-mail)
Malaysia-Japan International Institute of Technology,
Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
Dr. Ummikalsom Abidin (E-mail)
School of Mechanical Engineering, Faculty of Engineering,
Universiti Teknologi Malaysia, Johor, Malaysia
Dr. Manjeet Kumar(Email:manjit.msc@gmail.com)
Department of Mathematics, Dr. B.R. Ambedkar Govt. College,
Dabwali-125104, Haryana, India
Mohamed El Malki (Email:m.elmalki@ump.ac.ma)
Department of Physics, Faculty of Sciences, Mohammed First University, Morocco
Dr. Farhan Lafta Rashid (Email: farhan.lefta@uokerbala.edu.iq)
Petroleum Engineering Department, College of Engineering, University of Kerbala, Iraq
Anderson S. H. Chu (E-mail: shchu@connect.hku.hk)
Micromechanics and Composite Materials, Columbia University, New York, USA
Semarak Ilmu Book Chapters
CLIMATE CHANGE AND RENEWABLES
PROGRESSING TOWARDS A GREENER AND CLEANER FUTURE
