Thermal Comfort Analysis for Overhead and Underfloor Air Distribution Systems
DOI:
https://doi.org/10.37934/cfdl.13.12.113132Keywords:
Thermal comfort analysis, Overhead AC system, Underfloor AC system, CFD ModellingAbstract
Underfloor and overhead air distributions are two types of Heating Ventilating and Air Conditioning (HVAC) system in which both differs in term of channelling the supplied air into a space. Underfloor air distribution (UFAD) system channels the supplied air from the underfloor plenum and goes to the return vent at the ceiling. On the other hand, the overhead air distribution (OHAD) system utilizes the ceiling-to-ceiling air pathway approach. In this study, A developed HVAC model was proposed. Ansys Fluent program was used to numerically investigate the best thermal comfort of the proposed model in terms of occupant satisfaction by referring to ASHRAE Standard. Two scenarios were designed and adopted in the computational investigation which is OHAD and UFAD. Three heat-generating parameters were involved which are a room lamp, personal computer and occupant. The attained computational fluid dynamic (CFD) simulation results were validated. Generally, the attained CFD results showed that the UFAD system could perform better compare to the OHAD system even though the OHAD system could have some benefits. Specifically, the UFAD system provided the best thermal performance whereas the OHAD system was found to be less efficient in providing thermal comfort to the occupant and consumed a greater amount of energy because it was required to cool down the whole room instead of being cooled partly. The CFD results confirmed that the UFAD system was capable of maintaining the room temperature at 26°C at a height below 2.0 m compared to 1.2 m of the OHAD system. In conclusion, the UFAD system could provide better indoor air quality, and it could have superior performance for the tropic weather regions such as Malaysia compared to that of the OHAD system. Besides, using the UFAD system could be represented a preventive action that could be proposed to solve the mould growth inside any occupied room.
References
Dheyab, Hussam S., Manar Salih Mahdi Al-Jethelah, Tadahmun Ahmed Yassen, and Thamir Khalil Ibrahim. "Experimental study of the optimum air gap of a rectangular solar air heater." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 59, no. 2 (2019): 318-329.
Guan, Lisa. "Energy use, indoor temperature and possible adaptation strategies for air-conditioned office buildings in face of global warming." Building and Environment 55 (2012): 8-19. https://doi.org/10.1016/j.buildenv.2011.11.013
Azmi, Mohd Irwan Mohd, Nor Azwadi Che Sidik, Yutaka Asako, Wan Mohd Arif Aziz Japar, Nura Muaz Muhammad, and Nadlene Razali. "Numerical Studies on PCM Phase Change Performance in Bricks for Energy-Efficient Building Application–A Review." Journal of Advanced Research in Numerical Heat Transfer 1, no. 1 (2020): 13-21.
Westphalen, Detlef, and Scott Koszalinski. "Energy consumption characteristics of commercial building hvac systems volume I: Chillers, refrigerant compressors, and heating systems." Final Report to the Department of Energy (Contract No. DE-AC01-96CE23798) (2001).
Muhieldeen, Mohammed W., Lim Chong Lye, M. S. S. Kassim, Tey Wah Yen, and K. H. Teng. "Effect of Rockwool Insulation on Room Temperature Distribution." Journal of Advanced Research in Experimental Fluid Mechanics and Heat Transfer 3, no. 1 (2021): 9-15.
Wijaya, Elang Pramudya, and Ardiyansyah Saad Yatim. "Numerical Investigation of Air Movement on Laboratory Scale Psychrometric Chamber." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 84, no. 2 (2021): 82-91. https://doi.org/10.37934/arfmts.84.2.8291
American Society of Heating and Air-Conditioning Engineers (ASHAE), STANDARD 55 – THERMAL ENVIRONMENTAL CONDITIONS FOR HUMAN OCCUPANCY. 2017. https://www.ashrae.org/technical-resources/bookstore/standard-55-thermal-environmental-conditions-for-human-occupancy
Nicol, J. Fergus, and Michael A. Humphreys. "Adaptive thermal comfort and sustainable thermal standards for buildings." Energy and buildings 34, no. 6 (2002): 563-572. https://doi.org/10.1016/S0378-7788(02)00006-3
Khan, Muhammad Hammad, and William Pao. "Thermal comfort analysis of PMV model prediction in air conditioned and naturally ventilated buildings." Energy Procedia 75 (2015): 1373-1379. https://doi.org/10.1016/j.egypro.2015.07.218
Alajmi, Ali, and Wid El-Amer. "Saving energy by using underfloor-air-distribution (UFAD) system in commercial buildings." Energy conversion and management 51, no. 8 (2010): 1637-1642. https://doi.org/10.1016/j.enconman.2009.12.040
Tsai, Ting-Ya, Ren-Hao Liou, and Yi-Jiun Peter Lin. "An experimental study on the indoor environment using UnderFloor Air Distribution system." Procedia Engineering 79 (2014): 263-266. https://doi.org/10.1016/j.proeng.2014.06.341
Jerry Sipes. Tech Tips | Overhead Air Distribution Systems,. 2010 [cited 2021 20/07]; Available from: https://www.priceindustries.com/content/uploads/assets/literature/tech-tips/02-overhead-air-distribution-systems.pdf.
Ho, Son H., Luis Rosario, and Muhammad M. Rahman. "Comparison of underfloor and overhead air distribution systems in an office environment." Building and Environment 46, no. 7 (2011): 1415-1427. https://doi.org/10.1016/j.buildenv.2011.01.008
McQuiston, Faye C., Jerald D. Parker, and Jeffrey D. Spitler. Heating, ventilating, and air conditioning: analysis and design. John Wiley & Sons, 2004.
Fekadu, Birlie, and H. V. Harish. "Numerical Studies on Thermo-Hydraulic Characteristics of Turbulent Flow in a Tube with a Regularly Spaced Dimple on Twisted Tape." CFD Letters 13, no. 8 (2021): 20-31. https://doi.org/10.37934/cfdl.13.8.2031
Abed, Azher M., Doaa Fadhil Kareem, Hasan Sh Majdi, and Ammar Abdulkadhim. "Experimental and CFD Analysis of Two-Phase Forced Convection Flow in Channels of Various Rib Shapes." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 77, no. 1 (2021): 36-50. https://doi.org/10.37934/arfmts.77.1.3650
Alfarawi, Suliman SS, Azeldin El-sawi, and Hossin Omar. "Exploring Discontinuous Meshing for CFD Modelling of Counter Flow Heat Exchanger." Journal of Advanced Research in Numerical Heat Transfer 5, no. 1 (2021): 26-34.
Fathinia, F., and Ahmed Kadhim Hussein. "Effect of blockage shape on unsteady mixed convective nanofluid flow over backward facing step." CFD Letters 10, no. 1 (2018): 1-18.
Ibrahim, Thamir K., Ahmed T. Al-Sammarraie, Manar SM Al-Jethelah, Wadhah H. Al-Doori, Mohammad Reza Salimpour, and Hai Tao. "The impact of square shape perforations on the enhanced heat transfer from fins: Experimental and numerical study." International Journal of Thermal Sciences 149 (2020): 106144. https://doi.org/10.1016/j.ijthermalsci.2019.106144
Ibrahim, Thamir K., Ahmed T. Al-Sammarraie, Wadhah H. Al-Taha, Mohammad Reza Salimpour, Manar Al-Jethelah, Ahmed N. Abdalla, and Hai Tao. "Experimental and numerical investigation of heat transfer augmentation in heat sinks using perforation technique." Applied Thermal Engineering 160 (2019): 113974. https://doi.org/10.1016/j.applthermaleng.2019.113974
ASHRAE Standing Standard Project Committee 55, Thermal Environmental Conditions for Human Occupancy. 2017. file:///C:/Users/DELL/Google%20Drive/Nizar_UNITEN_DR.FIRAS/Nizar_Ain_Firas/preview_ANSI+ASHRAE+55-2017.pdf
A/L Sambathan, Sures, Firas Basim Ismail, and M. S. Nasif. "Underfloor air distribution technology: A review." In AIP Conference Proceedings, vol. 2035, no. 1, p. 070004. AIP Publishing LLC, 2018. https://doi.org/10.1063/1.5075594
Wiriyasart, Songkran, and Paisarn Naphon. "Numerical study on air ventilation in the workshop room with multiple heat sources." Case Studies in Thermal Engineering 13 (2019): 100405. https://doi.org/10.1016/j.csite.2019.100405
Nada, S. A., H. M. El-Batsh, H. F. Elattar, and N. M. Ali. "CFD investigation of airflow pattern, temperature distribution and thermal comfort of UFAD system for theater buildings applications." Journal of Building Engineering 6 (2016): 274-300. https://doi.org/10.1016/j.jobe.2016.04.008
Zheng, Chenxiao, Hongbo Liang, Shijun You, Wandong Zheng, and Zeqin Liu. "Numerical Simulation and Experimental Study of Comfort Air Conditioning Influenced by Bottom-supply and Stratum Ventilation Modes." Energy Procedia 105 (2017): 3609-3615. https://doi.org/10.1016/j.egypro.2017.03.833
Fukao, H., M. Oguro, M. Ichihara, and Sh Tanabe. "Comparison of underfloor vs. overhead air distribution systems in an office building." ASHRAE Transactions 108, no. 1 (2002): 64-76.
Kim, Gon, Laura Schaefer, Tae Sub Lim, and Jeong Tai Kim. "Thermal comfort prediction of an underfloor air distribution system in a large indoor environment." Energy and Buildings 64 (2013): 323-331. http://dx.doi.org/doi:10.1016/j.enbuild.2013.05.003
