Vol. 12 No. 5: May (2020)

Articles

• 

  Investigation on Cooling Channel in Hot Press Forming Through Numerical Simulation

  Chuan Huat Ng, Shamy Nazrein Md Yahaya, Chee Fung Lai, Yao Lun Chung, Ariff Asyraf Ehsan, Ruediger Baehr, Karl Heinrich Grote

  1-12

  • PDF
  Abstract views: 7
• 

  Investigation of Diesel Injector Flow Pattern Based On Computer-aided Design

  Mohd Azahari Razali, Rais Hanizam Madon, Md Norrizam Mohmad Ja’at, Azwan Sapit, Hamidon Salleh, Mohd Faisal Hushim, Waseem Alwan Zaboon, Muhammad Fauzi Samsubaha

  13-23

  • PDF
  Abstract views: 6
• 

  CFD Investigation into The Effect of Heave Plate on Vertical Motion Responses of a Floating Jetty

  Ahmad Fitriadhy, Nur Amira Adam, Nurul Aqilah Mansor, Mohammad Fadhli Ahmad, Ahmad Jusoh, Mohd Sofiyan Sulaiman, Noraieni Hj. Mokhtar

  24-35

  • PDF
  Abstract views: 7
• 

  CFD Simulation on Ventilation of an Indoor Atrium Space

  Nor Azirah Mohd Fohimi, Rosniza Rabilah, Mohd Mahadzir Mohammud, Mohd Fauzi Ismail, Muhammad Hanif Asror, Farid Nasir Ani

  52-59

  • PDF
  Abstract views: 30
• 

  Investigation of Heat Transfer Enhancement in the Refrigerator Freezer via Utilizing Elliptical-Shaped Scars

  Mustafa Ahmed Abdulhussain

  60-81

  • PDF
  Abstract views: 7
• 

  Indoor Thermal Performance Analysis of Vegetated Wall based on CFD Simulation

  Ratih Widiastuti, Juliana Zaini, Wahyu Caesarendra, Mochamad Agung Wibowo

  82-90

  • PDF
  Abstract views: 10
• 

  Turbulence Modelling of a Helical Savonius Wind Turbine Operating at Low Reynolds Number

  Ahmad Zakaria, Mohd Shahrul Nizam Ibrahim

  91-100

  • PDF
  Abstract views: 6
• 

  Study on the Addition of Nanoparticles in the Lead-free Solder During Reflow Soldering via Numerical Simulation - A Review

  Intan Norshalina Sahrudin, Mohd Sharizal Abdul Aziz , Mohd. Zulkifly Abdullah, Mohd Arif Anuar Mohd Salleh

  111-119

  • PDF
  Abstract views: 8