Heat Transfer Enhancement of Biomass Based Stirling Engine

Authors

  • Nik Kechik Mujahidah Nik Abdul Rahman Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
  • Syamimi Saadon Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
  • Mohd Hasrizam Che Man Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Jalan Semarak, 54100 Kuala Lumpur, Malaysia

DOI:

https://doi.org/10.37934/arfmts.100.1.110

Keywords:

Biomass, waste heat recovery, low temperature, biomass, Stirling engine

Abstract

Stirling engine as an external combustion engine with high efficiencies and able to use any types of heat source is the best candidate to recover waste heat of the exhausted gas by converting it into power. Thus, in this study Stirling engine was introduced to evaluate the possibility of recovering waste heat from biomass to produce power. For this reason, Computational Fluid Dynamic (CFD) simulation test was performed to design an initial computational model of Stirling engine for low temperature heat waste recovery. The CFD model was validated with the experiment model and shows 6.11% of average deviation. This result proves that the computational model can be further used to evaluate the performance of Stirling engine as waste heat recovery of biomass-based industrial boilers for low-grade temperature heat source.

Author Biographies

Nik Kechik Mujahidah Nik Abdul Rahman, Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia

nikmujahidah@gmail.com

Syamimi Saadon, Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia

mimisaadon@upm.edu.my

Mohd Hasrizam Che Man, Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Jalan Semarak, 54100 Kuala Lumpur, Malaysia

mhasrizam2@graduate.utm.my

Downloads

Published

2022-09-26

How to Cite

Nik Abdul Rahman, N. K. M., Syamimi Saadon, & Mohd Hasrizam Che Man. (2022). Heat Transfer Enhancement of Biomass Based Stirling Engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 100(1), 1–10. https://doi.org/10.37934/arfmts.100.1.110

Issue

Vol. 100 No. 1: December (2022)

Section

Articles

Most read articles by the same author(s)