About the Journal

The journal is concerned with high-level investigations of modern physical and mechanical problems and reports current progress in this field. The journal also encourages contributions from the newly emerging areas such as biomechanics, electromechanics, the mechanical behavior of advanced materials, nanomechanics, and many other inter-disciplinary research areas in which the concepts of applied mechanics are extensively applied and developed.

Most cited articles (Source: SCOPUS)

Effect of Thermal Insulation on Building Thermal Comfort and Energy Consumption in Egypt, Morsy, M., Fahmy, M., Abd Elshakour, H., Belal, A.M.

Sustainable Power Generation Pathways in Malaysia: Development of Long-Range Scenarios, Samsudin, M.S.N., Rahman, M.M., Wahid, M.A.

A Simulation on the Effect of Ultrasonic Vibration on Ultrasonic Assisted Soldering of Cu/SAC305/Cu Joint, Sharaf, Hussein, Jalil, Nawal Aswan Abdul, Salman, Sadeq

Current Issue

Vol. 128 No. 1: April (2025)
View Vol. 128 No. 1: April (2025)

EDITOR'S CHOICE

Effect of Storage Temperature of Articular Cartilage on Magnetic Resonance Imaging Greyscale and Biomechanical Properties
Hashemi Hashim, Mohd Juzaila Abd Latif, Mohammad Shukri Zakaria, Ruzy Haryati Hambali, Hambali Arep, Muhammad Noor Harun, Nguyen Ho Quang, Munirah Sha’ban

Published: 2024-11-30

Articles

  • A Novel Approach to Microwave Heating Control System: Crow Search Algorithm-Based PID Controllers

    Dhidik Prastiyanto, Esa Apriaskar, Ilya Amelia, Dimas Alfarizky Ilham, Viyola Lokahita Bilqis
    1-10
    DOI: https://doi.org/10.37934/aram.127.1.110

  • Efficiency and Precision in Printing: Study of the Control System of a Rotogravure Machine

    Rizki Setiadi, Wirawan Sumbodo, Wahyu Caesarendra, Deni Fajar Fitriyana, Kriswanto Kriswanto, Aldias Bahatmaka
    11-23
    DOI: https://doi.org/10.37934/aram.128.1.1123

  • Numerical Model Development of Reinforced Concrete Beam for Structural Health Monitoring

    Hamidun Mohd Noh, Nur’Ain Idris, Nur Aliah Rosli, Narimah Kasim, Rozlin Zainal, Sharifah Meryam Shareh Musa, Muhamad Faizal Mostaffa, Nor Lailatul Izzatil Azwani Mohamad
    24-39
    DOI: https://doi.org/10.37934/aram.128.1.2439

  • Effect of Storage Temperature of Articular Cartilage on Magnetic Resonance Imaging Greyscale and Biomechanical Properties

    Hashemi Hashim, Mohd Juzaila Abd Latif, Mohammad Shukri Zakaria, Ruzy Haryati Hambali, Hambali Arep, Muhammad Noor Harun, Nguyen Ho Quang, Munirah Sha’ban
    40-49
    DOI: https://doi.org/10.37934/aram.128.1.4049

  • Comparative Analysis of Fuzzy Logic, PID, and FOPID Controllers in DC Microgrid Voltage Regulation for Power Plants: Integrating Renewable Energy Sources

    Waseem Kh. Ibrahim, Fawaz S. Abdullah, Firas Aziz Ali
    50-61
    DOI: https://doi.org/10.37934/aram.128.1.5061

  • Finite Element Analysis for Aluminium Alloy 7075-T6 Subjected to the Bending-Torsional Variable Phase of Fatigue Loading

    Batool Mardan Faisal, Emad Jebur Yousif , Emad Kamil Hussein, Hussein Kadhim Sharaf , Thiago Santos , Caroliny Santos, Kaltoum Belhassan
    62-71
    DOI: https://doi.org/10.37934/aram.128.1.6271

  • Physical and Mechanical Properties of Mortar Mixed with Paper Mill Waste

    Arie Putra Usman, Saloma Saloma, Hanafiah Hanafiah, Siti Aisyah Nurjannah, Nurhidayah Anggraeni, Muhammad Azzam Alfarabi
    72-85
    DOI: https://doi.org/10.37934/aram.128.1.7285

  • Design, Fabrication, and Performance Testing of PMMA Interference Screws Prepared by 3D Printing Methods

    Rifky Ismail, Deni Fajar Fitriyana, Athanasius Priharyoto Bayuseno, Baharudin Priwintoko, Yusuf Subagyo, Muhammad Afrizal, Jamari Jamari , Januar Parlaungan Siregar, Tezara Cionita, Jamiluddin Jaafar
    86-95
    DOI: https://doi.org/10.37934/aram.128.1.8695

  • Phenol Concentration in Liquid Smoke Production from Rubberwood by Experiment and Simulation with CFD Modeling

    Bazlina Dawami Afrah, Novia Novia, Lia Cundari, Jihan Utami , Siti Istiani Pratiwi, Muhammad Yori Pratama
    96-104
    DOI: https://doi.org/10.37934/aram.128.1.96104

  • Hydroxyapatite (HAp) Extracted from Cockle Shells with Polylactic Acid (PLA) for Bone Implant Application

    Nursyazwani Zulkefli, Baharudin Mohamad, Eti Indarti, Eliza M. Yusup
    105-114
    DOI: https://doi.org/10.37934/aram.128.1.105114

  • Review of Aluminium (AA6061) Metal Matrix Composite (MMC) by Stir Casting Method

    Arbain Fitri Nordin, Nurul Fitriah Nasir, Shahrul Azmir Osman, Sharvin Ramesh, Ali Nasr Adbulkareem
    115-128
    DOI: https://doi.org/10.37934/aram.128.1.115128

  • A Case Study: Investigation of Untreated and Treated 304 Stainless Steel on Corrosion Behaviour

    Nur Izzah Atirah Jaffar Sidek, Siti Nurthoiyibatul Solehah Hussein, Shahrul Azmir Osman, Ali Ourdjini, Saliza Azlina Osman
    129-137
    DOI: https://doi.org/10.37934/aram.128.1.129137

  • Comparative Analysis of Aluminium 6061-T6 with Different Stock Leaves Setting on Holes True Position: A Case Study

    Muhammad Faiz Abdul Razak, Shahrul Azmir Osman, Ali Ourdjini, Saliza Azlina Osman
    138-151
    DOI: https://doi.org/10.37934/aram.128.1.138151

  • A Case Study on Ionic Compounds on the Aluminium 6061 Surface during Etching and Passivating Processes

    Muhammad Nasiruddin Zulkurnain, Shahrul Azmir Osman, Ali Ourdjini, Saliza Azlina Osman
    152-161
    DOI: https://doi.org/10.37934/aram.128.1.152161

  • The Effects of the Fineness Level of Rice Husk Ash as a Partial Cement Substitute in Self-Compacting Concrete (SCC)

    Firdaus, Bonita M. Tambun, Rosidawani, Alfrendo Satyanaga
    162-179
    DOI: https://doi.org/10.37934/aram.128.1.162179
View All Issues

Publishing Frequency
Monthly
Publishing Model
Open access
Article Processing Charge (APC)
All articles published in this journal are open access and freely available online, free to download, share and re-use. To cover the cost of providing open access, Semarak Ilmu Publishing  charges an Article Processing Charge (APC) once an article is accepted for publication. There are no charges for rejected articles, no submission charges, and no surcharges based on the length of an article, tables, figures or supplementary data.

The APC charged for accepted articles;
RM2000 (International Corresponding Author) or RM1500 (Malaysian Corresponding Author).