Vol. 129 No. 1: May (2025)

View Vol. 129 No. 1: May (2025)

EDITOR'S CHOICE

The Effect of Heat Input on the Weld Geometry, Distortion and Peel Strength on Pulsed Laser Wobbling of Austenitic Stainless-Steel Foils
Zawani Ismail, Moinuddin Mohammed Quazi, Mahadzir Ishak, Aiman Mohd Halil, Arslan Ahmed

Published: 2024-12-30

Articles

  • Crack Inspection on a Mosque by using Visual Inspection Method

    Nor Aiza Erme Mohamad, Tuan Norhayati Tuan Chik, Tengku Nor Natasya Tengku Mohd Adzim, Muhammad Azizi Yusri Rusidi, Rini Mulyani
    1-11
    DOI: https://doi.org/10.37934/aram.129.1.111

  • Study on the Propeller Characteristics of a Vertical Takeoff and Landing Aircraft

    Jaffar Syed Mohamed Ali, Hamdi Kamaruddin, Abdul Aabid
    12-23
    DOI: https://doi.org/10.37934/aram.129.1.1223

  • Investigation of the Estuarine Salinity-Morphology Characteristics Effects

    Nurul Shafiqah Shahrulnizam, Nuryazmeen Farhan Haron, Siti Nurhayati Mohd Ali, Noor Suraya Romali, Saerahany Legori Ibrahim, Mohammad Naser Sediqi, Mazlin Jumain, Zulkiflee Ibrahim
    24-31
    DOI: https://doi.org/10.37934/aram.129.1.2431

  • Mating-Based Manta Ray Foraging Optimization for Fuzzy-Hammerstein Model of an Electric Water Heater

    Ahmad Nor Kasruddin Nasir, Mohd Almaa Anwari Roslan, Mohd Falfazli Mat Jusof, Mohd Redzuan Ahmad, Ahmad Azwan Abdul Razak
    32-43
    DOI: https://doi.org/10.37934/aram.129.1.3243

  • Development of Mechanical Properties of TC17 Titanium Alloy Shaft Based on the Stress-Strain State Based on the Dynamic Load

    Imad O. Bachi Al-Fahad, Atheed Habeeb Taha Al-Temimi, Mazin Mahmood Yahya, Hussein Kadhim Sharaf
    44-56
    DOI: https://doi.org/10.37934/aram.129.1.4456

  • Optimisation of Structural Design in Benchtop CNC Milling Machines for Enhanced Performance and Efficiency

    Zammeri Abd Rahman, Saiful Bahri Mohamed, Mohamad Minhat, Mohd Shahir Kasim, Zulkifli Abd Rahman , Razwan Rohimi, Nur Hanis Hidayah Taufik, Wawan Trisnadi Putra
    57-74
    DOI: https://doi.org/10.37934/aram.129.1.5774

  • Comparison of Unsaturated Behaviour of Residual Soil in Malaysia and the Effect of Particle Size Distribution

    Suleiman Haji Nassor, Siti Jahara Matlan, Nazaruddin Abd Taha, Aniza Ibrahim, Rohaya Alias, Muhammad Mukhlisin
    75-90
    DOI: https://doi.org/10.37934/aram.129.1.7590

  • Non-Woven Fibre Filter Made from Bamboo and Oil Palm Empty Fruit Bunch for Water Treatment

    Xiau Qi Yu, Mimi Suliza Muhamad, Norshuhaila Mohamed Sunar, Roslinda Ali, Meriem Sediri
    91-104
    DOI: https://doi.org/10.37934/aram.129.1.91104

  • A Comparative Study of Numerical Modelling and Analysis for Large Articulated Pendulums

    Siti Fatimah Azzahra Ahmad Noh, Mohamad Ezral Baharudin, Mohd Zakimi Zakaria, Mohd Sazli Saad, Azuwir Mohd Nor
    105-121
    DOI: https://doi.org/10.37934/aram.129.1.105121

  • Validation of Strength Characteristics in the Modernization of a River Ship

    Yordan Denev
    122-132
    DOI: https://doi.org/10.37934/aram.129.1.122132

  • Influenced Nano and Micro Powder on Electrode Wear Rate in Electric Discharge Machining Process with RSM

    Shakir M. Mousa, Shukry H. Aghdeab
    133-143
    DOI: https://doi.org/10.37934/aram.129.1.133143

  • Experimental Mechanical Testing on Signal Warning Detection (SWAD) System

    Muhammad Syahmi Mohammad Hisyammuden, Suhaimi Hassan, Syazwan Zakaria, Musfirah Mustaffa, Mohamad Zhairul Iqumal Jumari, Mohamad Amirul Mat Nadir, Norbazlan Mohd Yusof, Mohamad Shah Ikhsan, Maznan Ismon, Hanis Zakaria, Omar Mohd Faizan Marwah, Mohd Sallehuddin Yusof, Mohd Azham Azmi, Mohamad Farid Sies, Mohd Suhel Mohd Zahir, Hanin Auni Faizal
    144-152
    DOI: https://doi.org/10.37934/aram.129.1.144152

  • The Impact of Silicon MOSFET on Class E Power Converter Switching Performance

    Norezmi Jamal, Syahmi Syafiq Ishak, Aira Zambri, Azuwien Aida Bohari, Shakir Saat, Yusmarnita Yusop, Nurul Fatini Mohd Isa, Md Liton Hossain
    153-165
    DOI: https://doi.org/10.37934/aram.129.1.153165

  • The Effect of Heat Input on the Weld Geometry, Distortion and Peel Strength on Pulsed Laser Wobbling of Austenitic Stainless-Steel Foils

    Zawani Ismail, Moinuddin Mohammed Quazi, Mahadzir Ishak, Aiman Mohd Halil, Arslan Ahmed
    166-177
    DOI: https://doi.org/10.37934/aram.129.1.166177

  • Dissimilar Weld Joint Performance of Micro Friction Stir Spot Welding with Pin Less Shoulder

    Hakam Muzakki, Faikul Umam, Suwarsono Suwarsono, Ario Sunar Baskoro
    178-187
    DOI: https://doi.org/10.37934/aram.129.1.178187