Experimental Mechanical Testing on Signal Warning Detection (SWAD) System

Authors

  • Muhammad Syahmi Mohammad Hisyammuden Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Suhaimi Hassan Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Syazwan Zakaria Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Musfirah Mustaffa Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Mohamad Zhairul Iqumal Jumari Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Mohamad Amirul Mat Nadir Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Norbazlan Mohd Yusof Center of Excellence, Projek Lebuhraya Usahasama Berhad, Menara Korporat, Persada PLUS, 47301 Petaling Jaya, Selangor, Malaysia
  • Mohamad Shah Ikhsan Center of Excellence, Projek Lebuhraya Usahasama Berhad, Menara Korporat, Persada PLUS, 47301 Petaling Jaya, Selangor, Malaysia
  • Maznan Ismon Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Hanis Zakaria Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Omar Mohd Faizan Marwah Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Mohd Sallehuddin Yusof Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Mohd Azham Azmi Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Mohamad Farid Sies Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Mohd Suhel Mohd Zahir Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia
  • Hanin Auni Faizal Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

DOI:

https://doi.org/10.37934/aram.129.1.144152

Keywords:

Maintenance worker, distance sensor, signal output, parameter setting and reliability test

Abstract

The research study was carried out for the safety of road workers in order to avoid incidents or hazards in the direct emergency line on the highway through the implementation of a danger detection sensor device. The distance sensor detected the object or dangerous vehicle from behind at a certain distance and sent the signal output via the siren device and emergency light, which were mounted at the maintenance vehicle. In additional, the device sent signal to the receiver to alert the employee about danger situation by vibrating the vibrator motor that installed at the worker’s arm. In this study, further details on effectiveness of reliability test on the transmitter and receiver of Signal Warning Detection (SWAD) System was discussed. This experimental study was done to find the best parameter setting due to the effectiveness before the device was approved to use for highway maintenance worker. SWAD system had been succesfully developed in detecting the dangerous situation for maintenance highway worker for their safety working enviroment.

Downloads

Author Biographies

Muhammad Syahmi Mohammad Hisyammuden, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

muhdsyahmi980@gmail.com

Suhaimi Hassan, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

suhaimihas@uthm.edu.my

Syazwan Zakaria, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

syazwanzakaria9494@gmail.com

Musfirah Mustaffa, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

musfirahmustaffa98@gmail.com

Mohamad Zhairul Iqumal Jumari, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

zhairul.iqmal@gmail.com

Mohamad Amirul Mat Nadir, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

mohamadamirulnadir@gmail.com

Norbazlan Mohd Yusof, Center of Excellence, Projek Lebuhraya Usahasama Berhad, Menara Korporat, Persada PLUS, 47301 Petaling Jaya, Selangor, Malaysia

bazlan@plus.com.my

Mohamad Shah Ikhsan, Center of Excellence, Projek Lebuhraya Usahasama Berhad, Menara Korporat, Persada PLUS, 47301 Petaling Jaya, Selangor, Malaysia

mshahikhsan@plus.com.my

Maznan Ismon, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

maznan@uthm.edu.my

Hanis Zakaria, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

hanisz@uthm.edu.my

Omar Mohd Faizan Marwah, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

mdfaizan@uthm.edu.my

Mohd Sallehuddin Yusof, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

mdsalleh@uthm.edu.my

Mohd Azham Azmi, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

azham@uthm.edu.my

Mohamad Farid Sies, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

farids@uthm.edu.my

Mohd Suhel Mohd Zahir, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

suhelgenius0306@gmail.com

Hanin Auni Faizal, Faculty of Mechanical Engineering and Manufacture, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

ad200139@student.uthm.edu.my

Downloads

Published

2024-12-30

How to Cite

Mohammad Hisyammuden, M. S., Hassan, . S., Zakaria, S., Mustaffa, M., Jumari, M. Z. I., Mat Nadir, M. A., … Faizal, H. A. (2024). Experimental Mechanical Testing on Signal Warning Detection (SWAD) System. Journal of Advanced Research in Applied Mechanics, 129(1), 144–152. https://doi.org/10.37934/aram.129.1.144152

Issue

Vol. 129 No. 1: May (2025)

Section

Articles

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)