Comparison of RFID Tag Structure for Wearable Applications System

Authors

  • N. H. Ramli Faculty of Electronic Engineering Technology, Universiti Malaysia Perlis, Uniciti Alam Campus, 02100, Sungai Chuchuh, Perlis, Malaysia
  • Rashidah Che Yob Faculty of Electronic Engineering Technology, Universiti Malaysia Perlis, Uniciti Alam Campus, 02100, Sungai Chuchuh, Perlis, Malaysia
  • Liyana Zahid Faculty of Electronic Engineering Technology, Universiti Malaysia Perlis, Uniciti Alam Campus, 02100, Sungai Chuchuh, Perlis, Malaysia
  • Norfatihah Bahari Faculty of Electronic Engineering Technology, Universiti Malaysia Perlis, Uniciti Alam Campus, 02100, Sungai Chuchuh, Perlis, Malaysia
  • Noor Kamalia Abd. Hamed Microelectronics and Nanotechnology- Shamsuddin Research Center, Institute for Integrated Engineering, Universiti Tun Husssien Onn Malaysia, 86400, Parit Raja, Batu Pahat, Johor, Malaysia

DOI:

https://doi.org/10.37934/araset.46.2.171177

Keywords:

RFID, tag Structure, wearable

Abstract

This paper proposed a comparison of Radio- Frequency Identification (RFID) tags for wearable applications. Three types of proposed RFID tag structures are designed which are square, hexagonal, and octagonal shapes to operate at frequencies 1.0GHz to 12GHz. The RFID tag structure consists of several meander line radiators. The structure of the meandered line radiator is attached to the cotton and jeans fabric. A monostatic radar system which consists of a Vector Network Analyzer and a horn antenna is configured to test the RFID tag in real life. The performances of RFID tags are evaluated in terms of the reflection coefficient (S11) and their operating frequency. The results will be guidelines while designing RFID tag structures for wearable application systems in the future.

Downloads

Download data is not yet available.

Author Biographies

N. H. Ramli, Faculty of Electronic Engineering Technology, Universiti Malaysia Perlis, Uniciti Alam Campus, 02100, Sungai Chuchuh, Perlis, Malaysia

hidayahramli@unimap.edu.my

Rashidah Che Yob, Faculty of Electronic Engineering Technology, Universiti Malaysia Perlis, Uniciti Alam Campus, 02100, Sungai Chuchuh, Perlis, Malaysia

rashidahcheyob@unimap.edu.my

Liyana Zahid, Faculty of Electronic Engineering Technology, Universiti Malaysia Perlis, Uniciti Alam Campus, 02100, Sungai Chuchuh, Perlis, Malaysia

liyanazahid@unimap.edu.my

Norfatihah Bahari, Faculty of Electronic Engineering Technology, Universiti Malaysia Perlis, Uniciti Alam Campus, 02100, Sungai Chuchuh, Perlis, Malaysia

norfatihah@unimap.edu.my

Noor Kamalia Abd. Hamed, Microelectronics and Nanotechnology- Shamsuddin Research Center, Institute for Integrated Engineering, Universiti Tun Husssien Onn Malaysia, 86400, Parit Raja, Batu Pahat, Johor, Malaysia

nkamalia.hamed@gmail.com

Published

2024-05-07

How to Cite

N. H. Ramli, Rashidah Che Yob, Liyana Zahid, Norfatihah Bahari, & Noor Kamalia Abd. Hamed. (2024). Comparison of RFID Tag Structure for Wearable Applications System. Journal of Advanced Research in Applied Sciences and Engineering Technology, 46(2), 171–177. https://doi.org/10.37934/araset.46.2.171177

Issue

Section

Articles

Most read articles by the same author(s)