Drying Performance of Piper Nigrum in a Swirling Fluidized Bed Dryer: An Experimental Study

Authors

  • Nur Fatihah Mohd Roslan Department of Mechanical, College of Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26630 Pahang, Malaysia
  • Ahmmad Shukrie Md Yudin Department of Mechanical, College of Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26630 Pahang, Malaysia
  • Muhammad Afiq Sumono Department of Mechanical, College of Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26630 Pahang, Malaysia
  • Muhammad Faris Mohamad Pozi Department of Mechanical, College of Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26630 Pahang, Malaysia
  • Muhammad Aidil Safuan Othman Department of Mechanical, College of Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26630 Pahang, Malaysia

DOI:

https://doi.org/10.37934/arfmts.93.1.148166

Keywords:

Drying, swirling fluidized bed dryer, distributor, piper nigrum, sun drying

Abstract

Sun drying is widely used in drying agricultural products such as piper nigrum because of its ability to dry a high volume in one batch. However, this conventional method of drying has many disadvantages, especially on the hygienic issue. This study investigates the drying performance of piper nigrum by using conventional sun drying and a new dryer called Swirling Fluidized Bed Dryer. Swirling fluidized bed dryer is operated using two inclination angles of air distributors, namely 45°, 67° and one perforated plate distributor. The drying performance is accessed in terms of drying time and moisture content reduction at three different operating temperatures. The results show that the drying time of piper nigrum using a swirling fluidized bed dryer is reduced as compared to conventional sun drying. Besides, the drying performance between different distributors in swirling fluidized bed shows that the moisture content reduction of piper nigrum using 45° angle of air distributor shows the most reduction compared to 67° angle distributor and followed by the perforated distributor. In conclusion, results show that the drying of piper nigrum in a swirling fluidized bed operated with 45° inclination angle of the distributor at high operating temperature gives the best performance.

Author Biographies

Nur Fatihah Mohd Roslan, Department of Mechanical, College of Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26630 Pahang, Malaysia

nurfatihahmohdroslan@gmail.com

Ahmmad Shukrie Md Yudin, Department of Mechanical, College of Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26630 Pahang, Malaysia

ahmmadshukrie@ump.edu.my

Muhammad Afiq Sumono, Department of Mechanical, College of Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26630 Pahang, Malaysia

afiq.sumono@gmail.com

Muhammad Faris Mohamad Pozi, Department of Mechanical, College of Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26630 Pahang, Malaysia

farispozi@gmail.com

Muhammad Aidil Safuan Othman, Department of Mechanical, College of Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26630 Pahang, Malaysia

aidilsafuanothaman@gmail.com

Downloads

Published

2022-03-10

How to Cite

Mohd Roslan, N. F. ., Md Yudin, A. S. ., Muhammad Afiq Sumono, Mohamad Pozi, M. F. ., & Muhammad Aidil Safuan Othman. (2022). Drying Performance of Piper Nigrum in a Swirling Fluidized Bed Dryer: An Experimental Study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93(1), 148–166. https://doi.org/10.37934/arfmts.93.1.148166

Issue

Section

Articles