Performance Investigation of PEM Fuel Cell with Three-Pass Serpentine Flow Fields under Varying Operating Voltages
DOI:
https://doi.org/10.37934/cfdl.16.10.5463Keywords:
PEM fuel cell, three-pass serpentine flow field, simulations, velocity distribution, oxygen mole fractionAbstract
The fuel cells performance is significantly impacted by both design and operational factors. The effective distribution of reactants within the flow fields is facilitated by the design of the flow channels. Therefore, the geometry of the flow channels and the overall design of the flow field play a crucial role in determining the fuel cells performance. Among various flow field designs, the serpentine flow field demonstrates superior performance compared to others. In this research, a three-dimensional proton exchange membrane fuel cell model was developed and used to study the influence of three-pass serpentine flow field on cell performance across varying operating voltages (0.9 V, 0.7 V and 0.5 V). The purpose of this research is to simulate and evaluate the comportment of the three-pass serpentine flow channels configuration by analyzing several parameters such as channels velocity distribution, oxygen mole fraction, pressure distribution and electrolyte current density along the z-axis at the cathode under different operating voltages. Numerical simulations were conducted using the COMSOL Multiphysics software. Therefore, this software is used to solve numerically the complete three-dimensional model with the governing equations of charge conservation, species transport, momentum, and continuity. The obtained results indicate that among different operating voltages, the cell voltage of 0.5 V demonstrated the highest channels velocity distribution, pressure distribution, and electrolyte current density. Moreover, it is found that at an operating voltage of 0.5 V, there is an important decrease in oxygen concentrations indicating a significant oxygen consumption in the fuel cell which improves the overall efficiency. This work contributes valuable insights to the optimization of fuel cell performance, specifically highlighting the favorable outcomes associated with the three-pass serpentine flow field design at lower operating voltages
References
Amadane, Yassine, Hamid Mounir, Abdellatif Elmarjani, and Ettouhami Mohamed Karim. "Numerical investigation of hydrogen consumption in Proton Exchange Membrane Fuel Cell by using computational fluid dynamics (CFD) simulation." Mediterranean Journal of Chemistry 7, no. 6 (2019): 396-415. https://doi.org/10.13171/mjc7618121415ya
Ettouhami, Mohamed Karim, Adil Atifi, Hamid Mounir, and Yassine Amadane. "Numerical simulation of Effect of Contact Pressure on Mechanical Behavior of Gas Diffusion Layers (GDL) and PFSA Membrane Assembly." Mediterranean Journal of Chemistry 8, no. 6 (2019): 453-461. https://doi.org/10.13171/mjc8619071811emk
Johari, Mohamad Noor Izwan, Irnie Azlin Zakaria, and Nur Syahirah Mohammed Affendy. "Thermal Behaviour of Hybrid Nanofluids in Water: Bio Glycol Mixture in Cooling Plates of PEMFC." CFD Letters 14, no. 6 (2022): 43-55. https://doi.org/10.37934/cfdl.14.6.4355
Wang, Yujie, Xingliang Yang, Zhengdong Sun, and Zonghai Chen. "A systematic review of system modeling and control strategy of proton exchange membrane fuel cell." Energy Reviews (2023): 100054. https://doi.org/10.1016/j.enrev.2023.100054
Ghasemi, Mostafa, and Hegazy Rezk. "Performance improvement of microbial fuel cell using experimental investigation and fuzzy modelling." Energy 286 (2024): 129486. https://doi.org/10.1016/j.energy.2023.129486
Vidian, Fajri, Wiranda Satria Atmaja, Ferdy Kurniawan, Rahmad Aldy, Taufik Arief, and Heni Fitriani. "Simulation Integrated Low Rank Coal Gasification SOFC Fuel Cell using Cycle Tempo: Energetic Analysis." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 105, no. 1 (2023): 31-40. https://doi.org/10.37934/arfmts.105.1.3140
Zaidi, Mohamad Faizal Ahmad, Shafini Mohd Shafie, and Mohd Kamarul Irwan Abdul Rahim. "AHP Analysis on the criteria and sub-criteria for the selection of fuel cell power generation in Malaysia." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 98, no. 2 (2022): 1-14. https://doi.org/10.37934/arfmts.98.2.114
Ghoreishian, Seyed Majid, Kaveh Shariati, Yun Suk Huh, and Jochen Lauterbach. "Recent Advances in Ammonia Synthesis over Ruthenium Single-Atom-Embedded Catalysts: a Focused Review." Chemical Engineering Journal (2023): 143533. https://doi.org/10.1016/j.cej.2023.143533
Tellez-Cruz, Miriam M., Jorge Escorihuela, Omar Solorza-Feria, and Vicente Compañ. "Proton exchange membrane fuel cells (PEMFCs): Advances and challenges." Polymers 13, no. 18 (2021): 3064. https://doi.org/10.3390/polym13183064
Ball, Sarah, Jonathan Sharman, and Ian Harkness. "Proton exchange membrane fuel cells: materials properties and performance." Platinum Metals Review 55, no. 4 (2011): 225-228. https://doi.org/10.1595/147106711X595102
Sauermoser, Marco, Natalya Kizilova, Bruno G. Pollet, and Signe Kjelstrup. "Flow field patterns for proton exchange membrane fuel cells." Frontiers in Energy Research 8 (2020): 13. https://doi.org/10.3389/fenrg.2020.00013
Arvay, A., J. French, J-C. Wang, X-H. Peng, and Arunachala Mada Kannan. "Nature inspired flow field designs for proton exchange membrane fuel cell." International Journal of hydrogen energy 38, no. 9 (2013): 3717-3726. https://doi.org/10.1016/j.ijhydene.2012.12.149
El-Shamy, Ashraf M. "A review on: biocidal activity of some chemical structures and their role in mitigation of microbial corrosion." Egyptian Journal of Chemistry 63, no. 12 (2020): 5251-5267. https://dx.doi.org/10.21608/ejchem.2020.32160.2683
Kahraman, Huseyin, and Mehmet F. Orhan. "Flow field bipolar plates in a proton exchange membrane fuel cell: Analysis & modeling." Energy Conversion and Management 133 (2017): 363-384. https://doi.org/10.1016/j.enconman.2016.10.053
Liu, Qingshan, Fengchong Lan, Jiqing Chen, Junfeng Wang, and Changjing Zeng. "Flow field structure design modification with helical baffle for proton exchange membrane fuel cell." Energy Conversion and Management 269 (2022): 116175. https://doi.org/10.1016/j.enconman.2022.116175
Shen, Jun, Zhengkai Tu, and Siew Hwa Chan. "Evaluation criterion of different flow field patterns in a proton exchange membrane fuel cell." Energy conversion and management 213 (2020): 112841. https://doi.org/10.1016/j.enconman.2020.112841
Lim, B. H., E. H. Majlan, W. R. W. Daud, M. I. Rosli, and T. Husaini. "Numerical analysis of modified parallel flow field designs for fuel cells." International Journal of Hydrogen Energy 42, no. 14 (2017): 9210-9218. https://doi.org/10.1016/j.ijhydene.2016.03.189
Xia, Lei, Zeting Yu, Guoping Xu, Shaobo Ji, and Bo Sun. "Design and optimization of a novel composite bionic flow field structure using three-dimensional multiphase computational fluid dynamic method for proton exchange membrane fuel cell." Energy Conversion and Management 247 (2021): 114707. https://doi.org/10.1016/j.enconman.2021.114707
Li, Wenkai, Qinglei Zhang, Chao Wang, Xiaohui Yan, Shuiyun Shen, Guofeng Xia, Fengjuan Zhu, and Junliang Zhang. "Experimental and numerical analysis of a three-dimensional flow field for PEMFCs." Applied Energy 195 (2017): 278-288. https://doi.org/10.1016/j.apenergy.2017.03.008
Tsai, Bin-Tsang, Chung-Jen Tseng, Zhong-Sheng Liu, Chih-Hao Wang, Chun-I. Lee, Chang-Chung Yang, and Shih-Kun Lo. "Effects of flow field design on the performance of a PEM fuel cell with metal foam as the flow distributor." International Journal of Hydrogen Energy 37, no. 17 (2012): 13060-13066. https://doi.org/10.1016/j.ijhydene.2012.05.008
Wang, Yulin, Shixue Wang, Shengchun Liu, Hua Li, and Kai Zhu. "Three-dimensional simulation of a PEM fuel cell with experimentally measured through-plane gas effective diffusivity considering Knudsen diffusion and the liquid water effect in porous electrodes." Electrochimica acta 318 (2019): 770-782. https://doi.org/10.1016/j.electacta.2019.06.120
Suárez, Christian, Alfredo Iranzo, Baltasar Toharias, and Felipe Rosa. "Experimental and numerical Investigation on the design of a bioinspired PEM fuel cell." Energy 257 (2022): 124799. https://doi.org/10.1016/j.energy.2022.124799
Manso, A. P., F. F. Marzo, J. Barranco, X. Garikano, and M. Garmendia Mujika. "Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review." International journal of hydrogen energy 37, no. 20 (2012): 15256-15287. https://doi.org/10.1016/j.ijhydene.2012.07.076
Ponnaiyan, Dineshkumar, Karthikeyan Palaniswamy, Mathan Chandran, and Vijai Kaarthi Visvanathan. "Investigating the impact of variable aspect ratio cathode flow field on temperature distribution and performance in a PEM fuel cell." Numerical Heat Transfer, Part A: Applications (2023): 1-25. https://doi.org/10.1080/10407782.2023.2275274
Caglayan, Dilara Gulcin, Berna Sezgin, Yılser Devrim, and Inci Eroglu. "Three-dimensional modeling of a high temperature polymer electrolyte membrane fuel cell at different operation temperatures." international journal of hydrogen energy 41, no. 23 (2016): 10060-10070. https://doi.org/10.1016/j.ijhydene.2016.03.049
Wang, Xiao-Dong, Yuan-Yuan Duan, Wei-Mon Yan, Duu-Jong Lee, Ay Su, and Pei-Hung Chi. "Channel aspect ratio effect for serpentine proton exchange membrane fuel cell: Role of sub-rib convection." Journal of Power Sources 193, no. 2 (2009): 684-690. https://doi.org/10.1016/j.jpowsour.2009.04.019
Suresh, P. V., S. Jayanti, A. P. Deshpande, and P. Haridoss. "An improved serpentine flow field with enhanced cross-flow for fuel cell applications." International journal of hydrogen energy 36, no. 10 (2011): 6067-6072. https://doi.org/10.1016/j.ijhydene.2011.01.147
Siegel, N. P., M. W. Ellis, D. J. Nelson, and M. R. Von Spakovsky. "A two-dimensional computational model of a PEMFC with liquid water transport." Journal of Power Sources 128, no. 2 (2004): 173-184. https://doi.org/10.1016/j.jpowsour.2003.09.072
Pharoah, J. G., K. Karan, and W. Sun. "On effective transport coefficients in PEM fuel cell electrodes: Anisotropy of the porous transport layers." Journal of Power Sources 161, no. 1 (2006): 214-224. https://doi.org/10.1016/j.jpowsour.2006.03.093
