Simulation Analysis of Induction Heating as a Self-Healing Method on Asphalt
DOI:
https://doi.org/10.37934/cfdl.15.3.4865Keywords:
Induction Heating, Self-Healing Asphalt, Induction Heating SimulationAbstract
Asphalt is a self-healing material at a specific temperature. The induced heating-healing of asphalt has been developed in the last few decades; an inductive asphalt can be created by adding inductive material. This paper aims to predict the performance of induction heating as a self-healing method on asphalt. This numerical simulation is carried out to obtain a suitable induction heater configuration. Numerical simulation is carried out in two stages, electrical analysis with ANSYS Electronics Desktop software and thermal analysis with ANSYS Transient Thermal Analysis. A cylindrical inductive asphalt sample is modeled and subjected to an electromagnetic field by a coil flowed by a high-frequency AC. As a result, a comparative temperature distribution is obtained by several current and frequency variations. The difference in current magnitude and frequency that flowed in the coil affects asphalt's heating performance and healing capacity. An increase in the frequency configuration results in a more significant increase in temperature than increasing the current magnitude in the coil.
Downloads
References
Xu, Shi, Alvaro García, Junfeng Su, Quantao Liu, Amir Tabaković, and Erik Schlangen. "Self‐Healing Asphalt Review: From Idea to Practice." Advanced Materials Interfaces 5, no. 17 (2018): 1800536. http://doi.org/10.1002/admi.201800536
Menozzi, Alessandro, Alvaro Garcia, Manfred N. Partl, Gabriele Tebaldi, and Philipp Schuetz. "Induction healing of fatigue damage in asphalt test samples." Construction and Building Materials 74 (2015): 162-168. http://doi.org/10.1016/j.conbuildmat.2014.10.034
García, Álvaro, Erik Schlangen, Martin van de Ven, and Dave van Vliet. "Induction heating of mastic containing conductive fibers and fillers." Materials and structures 44, no. 2 (2011): 499-508. http://doi.org/10.1617/s11527-010-9644-2
Hamdi, H., Sigit P. Hadiwardoyo, A. Gomes Correia, and Paulo AA Pereira. "Pavement maintenance optimization strategies for national road network in Indonesia applying genetic algorithm." (2017). http://doi.org/10.1016/j.proeng.2017.11.074
Garcia, A., S. Salih, and B. Gómez-Meijide. "Optimum moment to heal cracks in asphalt roads by means electromagnetic induction." Construction and Building Materials 238 (2020): 117627. http://doi.org/10.1016/j.conbuildmat.2019.117627
Ahsan, Qumrul, Wong Teng Hui, Intan Sharhida Othman, Liew Pay Jun, and Azma Putra. "Preparation and Characterization of Natural Fiber Filled Asphalt Based Damping Material." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 47, no. 1 (2018): 8-15.
Aziz, Siti Aishah Abdul, Saiful Amri Mazlan, Nik I. Nik Ismail, Seung-Bok Choi, and N. A. Yunus. "An enhancement of mechanical and rheological properties of magnetorheological elastomer with multiwall carbon nanotubes." J. Intell. Mater. Syst. Struct. 28, no. 20 (2017): 3127-3138. http://doi.org/10.1177/1045389x17705211
Ghosh, Swapan Kumar, ed. Self-healing materials: fundamentals, design strategies, and applications. Vol. 18. Weinheim: Wiley-vch, 2009. https://doi.org/10.1002/9783527625376
Ayar, Pooyan, Fernando Moreno-Navarro, and Mª Carmen Rubio-Gámez. "The healing capability of asphalt pavements: a state of the art review." Journal of Cleaner Production 113 (2016): 28-40. http://doi.org/10.1016/j.jclepro.2015.12.034
Concha, Jose L., and Jose Norambuena-Contreras. "Thermophysical properties and heating performance of self-healing asphalt mixture with fibres and its application as a solar collector." Applied Thermal Engineering 178 (2020): 115632. http://doi.org/10.1016/j.applthermaleng.2020.115632
Garcia, Alvaro, Erik Schlangen, and Martin Van de Ven. "Two ways of closing cracks on asphalt concrete pavements: microcapsules and induction heating." In Key Engineering Materials, vol. 417, pp. 573-576. Trans Tech Publications Ltd, 2010. http://doi.org/10.4028/www.scientific.net/KEM.417-418.573
Liu, Quantao, Wan Yu, Erik Schlangen, and Gerbert van Bochove. "Unravelling porous asphalt concrete with induction heating." Construction and Building Materials 71 (2014): 152-157. http://doi.org/10.1016/j.conbuildmat.2014.08.048
Liu, Quantao. Induction Healing of Porous Asphalt Concrete. S.l.: s.n., 2012.
Liu, Kai, Chaoliang Fu, Peixin Xu, Shuqin Li, and Muyang Huang. "An eco-friendliness inductive asphalt mixture comprising waste steel shavings and waste ferrites." Journal of Cleaner Production 283 (2021): 124639. http://doi.org/10.1016/j.jclepro.2020.124639
Garcia, Alvaro, Moisés Bueno, José Norambuena-Contreras, Quantao Liu, and Manfred N. Partl. "The model for induction-healing asphalt concrete." Asphalt Pavements 1 (2014): 1431-1440. http://doi.org/10.1201/b17219
Gómez-Meijide, Breixo, Harith Ajam, Alvaro Garcia, and Stefan Vansteenkiste. "Effect of bitumen properties in the induction healing capacity of asphalt mixes." Construction and Building Materials 190 (2018): 131-139. http://doi.org/10.1016/j.conbuildmat.2018.09.102
García, Álvaro. "Self-healing of open cracks in asphalt mastic." Fuel 93 (2012): 264-272. http://doi.org/10.1016/j.fuel.2011.09.009
Grossegger, D., and A. Garcia. "Influence of the thermal expansion of bitumen on asphalt self-healing." Applied Thermal Engineering 156 (2019): 23-33. http://doi.org/10.1016/j.applthermaleng.2019.04.034
Grossegger, D., B. Gomez-Meijide, S. Vansteenkiste, and A. Garcia. "Influence of rheological and physical bitumen properties on heat-induced self-healing of asphalt mastic beams." Construction and Building Materials 182 (2018): 298-308. http://doi.org/10.1016/j.conbuildmat.2018.06.148
García, Álvaro, Erik Schlangen, and Martin Van de Ven. "Properties of capsules containing rejuvenators for their use in asphalt concrete." Fuel 90, no. 2 (2011): 583-591. http://doi.org/10.1016/j.fuel.2010.09.033
Anupam, B. R., Umesh Chandra Sahoo, and Anush K. Chandrappa. "A methodological review on self-healing asphalt pavements." Construction and Building Materials 321 (2022): 126395. https://doi.org/10.1016/j.conbuildmat.2022.126395
Sun, Daquan, Guoqiang Sun, Xingyi Zhu, Alvaro Guarin, Bin Li, Ziwei Dai, and Jianming Ling. "A comprehensive review on self-healing of asphalt materials: Mechanism, model, characterization and enhancement." Advances in colloid and interface science 256 (2018): 65-93. https://doi.org/10.1016/j.cis.2018.05.003
Karimi, Mohammad M., Saeed Amani, Hamid Jahanbakhsh, Behnam Jahangiri, and Amir H. Alavi. "Induced heating-healing of conductive asphalt concrete as a sustainable repairing technique: A review." Cleaner Engineering and Technology 4 (2021): 100188. http://doi.org/10.1016/j.clet.2021.100188
Pokaad, Alif Zulfakar Bin, Khisbullah Hudha, and Mohd Zakaria Bin Mohamad Nasir. "Simulation and experimental studies on the behaviour of a magnetorheological damper under impact loading." International Journal of Structural Engineering 2, no. 2 (2011): 164-187. https://doi.org/10.1504/IJSTRUCTE.2011.039422
Vishnuram, Pradeep, Gunabalan Ramachandiran, Thanikanti Sudhakar Babu, and Benedetto Nastasi. "Induction Heating in Domestic Cooking and Industrial Melting Applications: A Systematic Review on Modelling, Converter Topologies and Control Schemes." Energies 14, no. 20 (2021): 6634. http://doi.org/10.3390/en14206634
Lucía, Oscar, Pascal Maussion, Enrique J. Dede, and José M. Burdío. "Induction heating technology and its applications: past developments, current technology, and future challenges." IEEE Transactions on industrial electronics 61, no. 5 (2013): 2509-2520. http://doi.org/10.1109/tie.2013.2281162
El-Mashad, Hamed M., and Zhongli Pan. "Application of induction heating in food processing and cooking." Food Engineering Reviews 9, no. 2 (2017): 82-90. http://doi.org/10.1007/s12393-016-9156-0
Mohamad, N., S. A. Mazlan, Fitrian Imaduddin, Seung-Bok Choi, and I. I. M. Yazid. "A comparative work on the magnetic field-dependent properties of plate-like and spherical iron particle-based magnetorheological grease." PloS one 13, no. 4 (2018): e0191795. http://doi.org/10.1371/journal.pone.0191795
Rudnev, Valery, Don Loveless, and Raymond L. Cook. Handbook of induction heating. CRC press, 2017. http://doi.org/10.1201/9781315117485-3
Sun, Rui, Yongjun Shi, Zhengfu Pei, Qi Li, and Ruihai Wang. "Heat transfer and temperature distribution during high-frequency induction cladding of 45 steel plate." Applied Thermal Engineering 139 (2018): 1-10. http://doi.org/10.1016/j.applthermaleng.2018.04.100
Ismail, Ahmad Rasdan, Norfadzilah Jusoh, Raemy Md Zein, Ismail Abdul Rahman, Mohd Amin Mahd Asri, and Nor Kamilah Makhtar. "Application of computational fluid dynamic simulation for the study of heat stress and heat strain-A review." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 73, no. 2 (2020): 138-145. https://doi.org/10.37934/arfmts.73.2.138145
Alkasasbeh, Hamzeh. "Numerical solution of heat transfer flow of casson hybrid nanofluid over vertical stretching sheet with magnetic field effect." CFD Letters 14, no. 3 (2022): 39-52. https://doi.org/10.37934/cfdl.14.3.3952
García, Álvaro, Erik Schlangen, Martin van de Ven, and Quantao Liu. "A simple model to define induction heating in asphalt mastic." Construction and Building Materials 31 (2012): 38-46. http://doi.org/10.1016/j.conbuildmat.2011.12.046
Li, Hechuan, Jianying Yu, Quantao Liu, Yuanyuan Li, Yaqi Wu, and Haiqin Xu. "Induction heating and healing behaviors of asphalt concretes doped with different conductive additives." Advances in Materials Science and Engineering 2019 (2019). http://doi.org/10.1155/2019/2190627
Apostolidis, P. A. N. O. S. "Experimental and numerical investigation of induction heating in asphalt mixes." (2015). http://doi.org/10.13140/RG.2.2.20606.28480
Imaduddin, Fitrian, Saiful Amri Mazlan, Hairi Zamzuri, and Abdul Yasser Abd Fatah. "Testing and parametric modeling of magnetorheological valve with meandering flow path." Nonlinear Dynamics 85, no. 1 (2016): 287-302. http://doi.org/10.1007/s11071-016-2684-6
Pranoto, Setyo, Bhre Wangsa Lenggana, Eko Prasetya Budiana, and Agung Tri Wijayanta. "Fluid Flow Analysis at Single and Dual Plenum Intake Manifolds to Reduce Pressure Drops Using Computational Approach." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 97, no. 1 (2022): 1-12. https://doi.org/10.37934/arfmts.97.1.112
