Influence Evaluation of Open Propellers with Boss Cap Fins: Case Studies on Types B4-70 and Ka4-70
DOI:
https://doi.org/10.37934/cfdl.16.9.143177Keywords:
B4-70, Energy Efficiency, Ka4-70, PBCF, Turbulence ModellingAbstract
Numerical analysis of fins effect on propeller performance was conducted, specifically using the B4-70 and Ka4-70 propellers. The study investigated different types of fins, including bare fins and PBCF (Propeller Boss Cap Fins) using computational fluid dynamics (CFD) simulations. The explicit algebraic stress model (EASM) based on Reynolds-Averaged Navier-Stokes (RANS) equations and turbulence modeling was employed to determine the optimal results. The main objective of this research was to enhance energy efficiency in ships by examining various open propeller configurations. The CFD simulation results for open propellers B4-70 and Ka4-70, with the addition of boss cap fins, revealed interesting phenomena. When the open propellers B4-70 and Ka4-70 were equipped with PBCF, they would experience an increase in efficiency (η0). This was because the performance of the fins functioned optimally when the advance ratio (J) is high, as evident from the high velocity values. Thus, with higher velocity and lower pressure in the boss cap region at high J values, there was an elevation in thrust force due to the reduction of hub vortex. In the case of open propeller B4-70 with added PBCF, there was an increase in the efficiency value (η0) ranging from 3% to 5% when J varied from 0 to 0.7. Similarly, for propeller Ka4-70 with the addition of PBCF, there was an increase in the efficiency value (η0) ranging from 1% to 3% when J varied from 0 to 0.7. Notably, the use of an Energy-Saving Device (ESD) in the form of PBCF can increase the efficiency of ship propeller, as reported in this paper. Consequently, these findings affirmed the reliability of the overall calculations using the CFD approach.
Downloads
References
Jasper, F., and H. Shinichi. "Fourth IMO Greenhouse Gas Study 2020." International Maritime Organisation (IMO), London, UK (2020).
DNV. 2021. “Maritime Forecast To 2050 - Energy Transition Outlook 2021.” Høviky
International Maritime Organization. 2021. “IMO’s Work to Cut GHG Emissions from Ships
International Maritime Organization 2021. “Fourth IMO GHG Study 2020 Full Report.
Kawamura, Takafumi, Kazuyuki Ouchi, and Takeo Nojiri. "Model and full scale CFD analysis of propeller boss cap fins (PBCF)." Journal of marine science and technology 17 (2012): 469-480. https://doi.org/10.1007/s00773-012-0181-2
Seo, Jeonghwa, Seung-Jae Lee, Bumwoo Han, and Shin Hyung Rhee. "Influence of design parameter variations for propeller-boss-cap-fins on hub vortex reduction." Journal of Ship Research 60, no. 04 (2016): 203-218. https://doi.org/10.5957/jsr.2016.60.4.203
Adietya, Berlian Arswendo, I. Ketut Aria Pria Utama, and Wasis Dwi Aryawan. "CFD Analysis into the Effect of using Propeller Boss Cap Fins (PBCF) on Open and Ducted Propellers, Case Study with Propeller B-Series and Kaplan-Series." CFD Letters 14, no. 4 (2022): 32-42. https://doi.org/10.37934/cfdl.14.4.3242
Ridwan, M., B. A. Adietya, and D. Chrismianto. "Stability analysis of trawls type traditional fishing boat with modification of eco-friendly fishing-gear on the north coast of Central Java." In IOP Conference Series: Materials Science and Engineering, vol. 403, no. 1, p. 012052. IOP Publishing, 2018. https://doi.org/10.1088/1757-899X/403/1/012052
Kiryanto, Mohammad Ridwan, Berlian Arswendo Adietya, Deddy Chrismianto, and Sri Hartanto Aji Sasongko. "Stability and total resistance analysis of catamaran fishing boat for Java North Sea area with hullform model and fishing gear variation." International Journal of Mechanical Engineering and Technology (IJMET) Vol 10, no. 01 (2019): 1291-1302.
Chrismianto, Deddy, Ahmad Fauzan Zakki, Berlian Arswendo, and Insanu Abdilla Cendikia Abar. "Comparison of Propeller Type B-Series and Au-Outline Gawn Series for Improving on Submarine Propulsion Performance using CFD." International Journal of Advanced Research in Engineering and Technology 10, no. 2 (2019). https://doi.org/10.34218/IJARET.10.2.2019.061
Adietya, Berlian Arswendo, Aulia Windyandari, and Ahmad Fauzan Zakki. "The Study on Stability and Seakeeping Characteristics of the Glass Bottom Boat Trimaran in Karimunjawa Island." In IOP Conference Series: Earth and Environmental Science, vol. 135, no. 1, p. 012007. IOP Publishing, 2018. https://doi.org/10.1088/1755-1315/135/1/012007
Ariana, I. Made, Riyan Bagus Prihandanu, Dhimas Widhi Handani, and A. A. B. Dinariyana. "Investigation of the Effects of the Pre-Duct in a Ship on Propeller–Hull Interactions Using the CFD Method." CFD Letters 15, no. 4 (2023): 17-30. https://doi.org/10.37934/cfdl.15.4.1730
International Maritime Organization. 2009. Guidelines for Voluntary Use of the Ship Energy Efficiency Operational Indicator. Vol. MEPC.1/Circ. London: International Maritime Organization – Part b
Mewis, Friedrich. "A novel power-saving device for full-form vessels." In First International Symposium on Marine Propulsors, SMP, vol. 9. 2009.
Celik, Ishmail B., Urmila Ghia, Patrick J. Roache, and Christopher J. Freitas. "Procedure for estimation and reporting of uncertainty due to discretization in CFD applications." Journal of fluids Engineering-Transactions of the ASME 130, no. 7 (2008). https://doi.org/10.1115/1.2960953
Darsono, Febri Budi, Rahmad Doni Widodo, and Akhmad Nurdin. "Analysis Of the Effect of Flow Rate and Speed on Four Blade Tubular Water Bulb-Turbine Efficiency Using Numerical Flow Simulation." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 90, no. 2 (2021): 1-8. https://doi.org/10.37934/arfmts.90.2.18
Niknahad, Ali. "Numerical study and comparison of turbulent parameters of simple, triangular, and circular vortex generators equipped airfoil model." Journal of Advanced Research in Numerical Heat Transfer 8, no. 1 (2022): 1-18.
Wallin, Stefan. Engineering turbulence modelling for CFD with focus on explicit algebraic Reynolds stress models. Stockholm, Sweden: Royal Institute of Technology, Department of Mechanics, 2000.
Xing, L. H., G. B. Huang, and Min Yan. "Numerical Simulation of 3D Density Flow by an Improved EASM Model." Procedia Environmental Sciences 10 (2011): 753-758. https://doi.org/10.1016/j.proenv.2011.09.122
Matsuda, Satoshi, and Tokihiro Katsui. "Hydrodynamic Forces and Wake Distribution of Various Ship Shapes Calculated Using a Reynolds Stress Model." Journal of Marine Science and Engineering 10, no. 6 (2022): 777. https://doi.org/10.3390/jmse10060777
Carlton, John. 2019. “Thrust Augmentation Devices.” In Marine Propellers and Propulsion, 367–78. Elsevier. https://doi.org/10.1016/B978-0-08-100366-4.00013-4
Mizzi, Kurt, Yigit Kemal Demirel, Charlotte Banks, Osman Turan, Panagiotis Kaklis, and Mehmet Atlar. "Design optimisation of Propeller Boss Cap Fins for enhanced propeller performance." Applied Ocean Research 62 (2017): 210-222. https://doi.org/10.1016/j.apor.2016.12.006
Bahatmaka, Aldias, Aditya Rio Prabowo, and Dong-Joon Kim. "Effect of Nozzle Performance on the Ducted Propeller: A Benchmark-Simulation Study using OpenFOAM." Transportation Research Procedia 55 (2021): 645-652. https://doi.org/10.1016/j.trpro.2021.07.031
Gatski, Thomas B., and Charles G. Speziale. "On explicit algebraic stress models for complex turbulent flows." Journal of fluid Mechanics 254 (1993): 59-78. https://doi.org/10.1017/S0022112093002034
Gao, Qiuxin, Wei Jin, and Dracos Vassalos. "The calculations of propeller induced velocity by RANS and momentum theory." Journal of Marine Science and Application 11, no. 2 (2012): 164-168. https://doi.org/10.1007/s11804-012-1118-1
Anderson, John David, and John Wendt. 1995. Computational Fluid Dynamics. Vol. 206. Berlin: Springer
Hsin, Ching-Yeh, Bo-Hong Lin, and Chung-Ching Lin. "The optimum design of a propeller energy-saving device by computational fluid dynamics." In Computational Fluid Dynamics 2008, pp. 655-660. Springer Berlin Heidelberg, 2009. https://doi.org/10.1007/978-3-642-01273-0_87
Gaggero, Stefano, Juan Gonzalez-Adalid, and Mariano Perez Sobrino. "Design and analysis of a new generation of CLT propellers." Applied Ocean Research 59 (2016): 424-450. https://doi.org/10.1016/j.apor.2016.06.014
Ghassemi, Hassan, Amin Mardan, and Abdollah Ardeshir. "Numerical analysis of hub effect on hydrodynamic performance of propellers with inclusion of PBCF to equalize the induced velocity." Polish Maritime Research 19, no. 2 (2012): 17-24. https://doi.org/10.2478/v10012-012-0010-x
Hansen, Hans Richard, Tom Dinham-Peren, and Takeo Nojiri. "Model and full scale evaluation of a ‘propeller boss cap fins’ device fitted to an Aframax tanker." In Second International Symposium on Marine Propulsors. 2011.
Gaggero, Stefano, Diego Villa, Giorgio Tani, Michele Viviani, and Daniele Bertetta. "Design of ducted propeller nozzles through a RANSE-based optimization approach." Ocean Engineering 145 (2017): 444-463. https://doi.org/10.1016/j.oceaneng.2017.09.037
Lim, Sang-Seop, Tae-Won Kim, Dong-Myung Lee, Chung-Gil Kang, and Soo-Young Kim. "Parametric study of propeller boss cap fins for container ships." International Journal of Naval Architecture and Ocean Engineering 6, no. 2 (2014): 187-205. https://doi.org/10.2478/IJNAOE-2013-0172
Nojiri, Takeo, Norio Ishii, and Hisashi Kai. "Energy saving technology of PBCF (Propeller Boss Cap Fins) and its evolution." マリンエンジニアリング 46, no. 3 (2011): 350-358. https://doi.org/10.5988/jime.46.350
Eom, Myeong-Jin, Yoon-Ho Jang, and Kwang-Jun Paik. "A study on the propeller open water performance due to immersion depth and regular wave." Ocean Engineering 219 (2021): 108265. https://doi.org/10.1016/j.oceaneng.2020.108265
Atlar, M. "An investigation into effective boss cap designs to eliminate propeller hub vortex cavitation." Proceedings of PRADS'98 (1998): 757-769. https://doi.org/10.1016/S0928-2009(98)80220-5
Seo, Jeonghwa, Seung-Jae Lee, Bumwoo Han, and Shin Hyung Rhee. "Influence of design parameter variations for propeller-boss-cap-fins on hub vortex reduction." Journal of Ship Research 60, no. 04 (2016): 203-218. https://doi.org/10.5957/jsr.2016.60.4.203
Adietya, Berlian Arswendo, I Ketut Aria Pria Utama, Wasis Dwi Aryawan, Mochammad Nasir, Nurcholis, Mahendra Indiaryanto, Nurwidhi Asrowibowo, Rizqi Dian Permana, and Nurhadi. 2023. “Numerical and Experimental Investigations into the Characteristics of Wageningen B4-70 Series of Propeller with Boss Cap Fins.” CFD Letters 15, no. 10 (2023): 152–169. https://doi.org/10.37934/cfdl.15.10.152169
Adietya, Berlian Arswendo, I. Ketut Aria Pria Utama, Wasis Dwi Aryawan, Dwi Wahyudi, Anis Kurniati Arifah, Baharuddin Ali, and Bashofi Cahyo Buwono. "Characteristics Investigations of Ducted Ka4-70 Series Propeller with Boss Cap Fins Using Numerical and Experimental Method." CFD Letters 16, no. 2 (2024): 24-41. https://doi.org/10.37934/cfdl.16.2.2441
Trimulyono, Andi, A. B. Jatmiko, I. P. Mulyatno, and H. Yudo. "The effect of propeller cap angle and fin size of PBCF on propeller performance." In IOP Conference Series: Earth and Environmental Science, vol. 972, no. 1, p. 012045. IOP Publishing, 2022. https://doi.org/10.1088/1755-1315/972/1/012045
Trimulyono, A., I. P. Mulyatno, and A. F. Rachmat. "The Effect of Mewis Duct Energy Saving Device to Propeller Performance." In IOP Conference Series: Earth and Environmental Science, vol. 1098, no. 1, p. 012076. IOP Publishing, 2022. https://doi.org/10.1088/1755-1315/1098/1/012076
Adietya, Berlian Arswendo, Husein Syahab, Mochammad Nasir, Wasis Dwi Aryawan, and I Ketut Aria Pria Utama. 2023. “Numerical Analysis into the Improvement Performance of Ducted Propeller by Using Fins: Case Studies on Types B4-70 and Ka4-70.” CFD Letters (Accepted for Publication)
Adietya, B. A., W. D. Aryawan, and I. K. A. P. Utama. "A study into the effect of tip clearance on the performance of b-series and kaplan-series ducted propellers." In IOP Conference Series: Earth and Environmental Science, vol. 1166, no. 1, p. 012038. IOP Publishing, 2023. https://doi.org/10.1088/1755-1315/1166/1/012038
Stern, Fred. 2014. Mechanics of Fluids and Transport Processes. 57:020. Iowa City: University of Iowa.
Molland, Anthony F., Stephen R. Turnock, and Dominic A. Hudson. Ship resistance and propulsion. Cambridge university press, 2017. https://doi.org/10.1017/9781316494196
Downloads
Published
How to Cite
Issue
Section
