Vol. 110 No. 1: October (2023)

View Vol. 110 No. 1: October (2023)

EDITOR'S CHOICE

Contribution of Plastic Waste in Recycles Concrete Aggregate Paving Block
Tommy Iduwin, Sigit Pranowo Hadiwardoyo, Andri Irfan Rifai, Riana Herlina Lumingkewas

 
Published: 2023-10-20

Articles

  • Contribution of Plastic Waste in Recycles Concrete Aggregate Paving Block

    Tommy Iduwin, Sigit Pranowo Hadiwardoyo, Andri Irfan Rifai, Riana Herlina Lumingkewas
    1-10
    • PDF
      • Abstract views: 264
    DOI: https://doi.org/10.37934/aram.110.1.110

  • Study of the Mechanical and Physical Properties of Pervious Concrete Modified with Treated and Untreated Natural Coconut Fiber for Pavement

    Mohamed H Shaat , Noor Faisal Abas, Haitham Esam Rababah
    11-21
    • PDF
      • Abstract views: 317
    DOI: https://doi.org/10.37934/aram.110.1.1121

  • Factor that Contributes to the Ramp Design and the Effective Gradient for Ramp at Entrance Carporch Area for Housing Sector in Double-Storey House to Accommodate Low-Clearance Vehicles

    Siti Nur’Syazwani Mohd Shamsaidy, Norhidayah Md Ulang
    22-36
    • PDF
      • Abstract views: 289
    DOI: https://doi.org/10.37934/aram.110.1.2236

  • Exploring the Feasibility of Utilizing Palm Tree Texture for a Self-Cleaning Architectural Design of Building Envelopes

    Ho Yee Shin, Nuzaihan Aras Agus Salim, Rahman Zakaria, Ahmad Sanusi Hassan, Norsafiah Norazman
    37-51
    • PDF
      • Abstract views: 123
    DOI: https://doi.org/10.37934/aram.110.1.3751

  • Effects of Coating and Lubrication on Friction and Wear for Metal-to Metal Application

    Muhammad Haziq Ideris, Shafie Kamaruddin, Mohd Hafis Sulaiman, Nor Aiman Sukindar, Ahmad Zahirani Ahmad Azhar, Ahmad Shah Hizam Md Yasir
    52-62
    • PDF
      • Abstract views: 110
    DOI: https://doi.org/10.37934/aram.110.1.5262

  • Tensile Properties of 3D Printed Recycled PLA Filament: A Detailed Study on Filament Fabrication Parameters

    Sanusi Hamat, Mohamad Ridzwan Ishak, Mohd Sapuan Salit, Noorfaizal Yidris, Syamir Alihan Showkat Ali, Mohd Sabri Hussin, Maliki Ibrahim, Asmawi Sanuddin
    63-72
    • PDF
      • Abstract views: 253
    DOI: https://doi.org/10.37934/aram.110.1.6372

  • Validation Calibration Factor of Single Photon Emission Computed Tomography for Iodine-131 using Non-Spherical Targeted Volume

    Mohd Akmal Masud, Mohd Zamani Ngali, Siti Amira Othman, Ishkrizat Taib, Kahar Osman, Salihatun Md Salleh, Ahmad Zahran Md. Khudzari, Nor Salita Ali, Anucha Chaichana
    73-85
    • PDF
      • Abstract views: 125
    DOI: https://doi.org/10.37934/aram.110.1.7385

  • Investigation of Battery Energy Storage System (BESS) during Loading Variation

    Md Azizul Hoque, Mohd Khair Hassan, Abdulrahman Hajjo, Taha A. Taha
    86-96
    • PDF
      • Abstract views: 200
    DOI: https://doi.org/10.37934/aram.110.1.8696

  • Development of Converter for Linear Wave Energy Stabilizer by Replacing the Inductor Type from the Existing Modified SEPIC Circuit

    Putra Ahmad Khalifa Mohamed Salleh, Taib Ibrahim , Nursyarizal Mohd Nor, Ramani. Kannan, Mohd Zuraimi Rahman
    97-111
    • PDF
      • Abstract views: 115
    DOI: https://doi.org/10.37934/aram.110.1.97111

  • Effect of Tensile Stress on Self-Magnetic Leakage Field in Carbon Steel Pipe Material

    Nur Akmal Hakim Jasni, Mohamed Azlan Suhot, Mohd Hisham Abu Bakar, Aishah Mastura Supian
    112-123
    • PDF
      • Abstract views: 120
    DOI: https://doi.org/10.37934/aram.110.1.112123